[Thu Jul 12 01:46:34 2012] Detection parameters:
  Position = (278.2, 359.0) = 15 3 46.61 -41 45 13.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1123.6 +/- 53.0
  Background counts = 367.4
  Rate = 0.06 +/- 0.003

[Thu Jul 12 01:46:42 2012] Off-axis axis estimate = 4.63'
[Thu Jul 12 01:54:04 2012] Using EEF radius (= 8.74 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 01:54:04 2012] Initial guess for spatial extent in simple fitting = 8.74"
[Thu Jul 12 01:54:04 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.992
[Thu Jul 12 01:54:04 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 8.74"
[Thu Jul 12 06:50:26 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src23.ximg exists
[Thu Jul 12 06:50:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src23.csv
[Thu Jul 12 06:50:26 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src23_1.ximg exists
[Thu Jul 12 06:50:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src23.csv
[Thu Jul 12 06:50:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 06:50:28 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Thu Jul 12 06:50:28 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Thu Jul 12 06:50:28 2012] Fit fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Thu Jul 12 22:33:50 2012] Spatial fit model total counts = 10763.600000, observed total counts = 10599.000000
[Thu Jul 12 22:33:50 2012] Offset between fit and detection position for source 23 = 8.257629 pixels
[Thu Jul 12 22:33:50 2012] 10736.866000 total counts/ 10052.400000 bgd. counts: snr = 6.826797
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 8.257629 pixels
  Position = (283.7, 352.9) = 15 3 44.48 -41 45 40.6
  Extent = 17.5 (17.4-17.5)", rotation angle = 0
  Source counts = 684.5 +/- 103.6
  Background counts = 10052.4
  Rate = 0.04 +/- 0.006
[Thu Jul 12 22:33:50 2012] Source 23 is offset by 4.264253 and -3.720046 pixels which is larger than
2 X fitted extent = 1.053122 x 1.053122, not incorporating fit results
[Thu Jul 12 22:33:51 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 22:33:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 22:33:51 2012] Assessing source extent using major axis lower bound
[Thu Jul 12 22:33:51 2012] Source does appear to be extended
[Thu Jul 12 22:33:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 22:33:52 2012] Source is confused with source 30
[Thu Jul 12 22:35:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 12 22:35:19 2012] Initial guess for spatial extent in simple fitting = 17.46"
[Thu Jul 12 22:35:19 2012] source mask rpix=4.0, npix_max = 81, mask sum = 81, frac = 0.994
[Thu Jul 12 22:35:19 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 17.46"
[Fri Jul 13 04:58:20 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src22.ximg exists
[Fri Jul 13 04:58:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src22.csv
[Fri Jul 13 04:58:20 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src22_1.ximg exists
[Fri Jul 13 04:58:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src22.csv
[Fri Jul 13 04:58:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 04:58:22 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Fri Jul 13 04:58:22 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Fri Jul 13 04:58:22 2012] Fit fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Fri Jul 13 22:14:41 2012] Warning, spatial fit 22 centroid is now closest to src. 25
[Fri Jul 13 22:14:41 2012] Spatial fit model total counts = 17838.700000, observed total counts = 15812.000000
[Fri Jul 13 22:14:41 2012] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul 13 22:14:41 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 22:14:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 22:14:41 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 22:14:41 2012] Source does appear to be extended
[Fri Jul 13 22:14:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 22:16:13 2012] XMMSAS src. selection expression = ellipse(24632.462000, 30649.884000, 1047.804030, 1047.804030, 0.000000, X, Y)
[Fri Jul 13 22:16:13 2012] Writing source region out to fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src23_src.reg
[Fri Jul 13 22:16:13 2012] Extracting stamp from image fullrun_pn_xmm0143980201_pi300-10000_cl_sm2.00.img.gz, (223, 293) - (344, 413)
[Fri Jul 13 22:16:13 2012] XMMSAS bgd. selection expression = annulus(24632.462000, 30649.884000, 1746.340050, 3492.680101, X, Y) && !ellipse(21144.885200, 28514.516820, 691.952820, 691.952820, 0.000000, X, Y) && !ellipse(20044.016000, 24416.318000, 8401.488242, 8401.488242, 0.000000, X, Y) && !ellipse(25959.104000, 34533.528000, 1612.488046, 1612.488046, 0.000000, X, Y) && !ellipse(29568.828000, 35339.101800, 1711.296049, 1711.296049, 0.000000, X, Y) && !ellipse(28358.208000, 34940.568000, 1707.464049, 1707.464049, 0.000000, X, Y) && !ellipse(24087.205400, 33679.096000, 1306.360038, 1306.360038, 0.000000, X, Y) && !ellipse(27029.524000, 32740.374000, 1527.224044, 1527.224044, 0.000000, X, Y) && !ellipse(23100.612823, 33265.881012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25002.566956, 33015.647156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24398.831879, 32493.185181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26154.815155, 32236.741211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21985.880188, 31169.029144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25380.046000, 31475.314000, 2794.144080, 2794.144080, 0.000000, X, Y) && !ellipse(23550.032288, 31630.558197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21655.826000, 30504.986000, 835.016024, 835.016024, 0.000000, X, Y) && !ellipse(21345.862000, 29052.432000, 1395.280040, 1395.280040, 0.000000, X, Y) && !ellipse(22610.616547, 28829.762482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23983.699463, 30237.947540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22305.861664, 28480.851807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22081.852000, 28207.544000, 1323.800038, 1323.800038, 0.000000, X, Y) && !ellipse(20936.759964, 27876.336151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22436.597961, 26652.208344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21023.429413, 26572.427368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28966.000000, 33638.729431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28515.720000, 33313.932000, 1582.160046, 1582.160046, 0.000000, X, Y) && !ellipse(27880.451447, 33174.640930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27997.190430, 30488.356628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26277.673981, 28245.902954, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 13 22:16:13 2012] Writing fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src23.gif
[Fri Jul 13 23:35:46 2012] Mean detx,y = (-1000.40, -3441.60) 
[Fri Jul 13 23:35:48 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 13 23:36:16 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 13 23:36:17 2012] Setting source spectrum file to fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri Jul 13 23:36:17 2012] Setting bgd. spectrum file to fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Sat Jul 14 20:24:35 2012] Updating aperture counts using extracted products
[Sat Jul 14 20:24:35 2012] Error reading totcts from fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sat Jul 14 20:24:40 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 20:24:40 2012] Using photon index=1.80, rate=0.0414, arf fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src23.arf
[Sat Jul 14 20:24:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 20:24:40 2012] Updating source flux to 1.2e-13
[Sat Jul 14 20:44:28 2012] Flag b found in src. 23 procflags, skipping spectral fitting
[Sat Jul 14 20:44:28 2012] Flag p found in src. 23 procflags, skipping spectral fitting
[Sat Jul 14 20:44:28 2012] Flag c found in src. 23 procflags, skipping spectral fitting