[Thu Jul 12 01:46:34 2012] Detection parameters: Position = (243.2, 327.0) = 15 4 0.24 -41 47 33.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 2551.9 +/- 67.4 Background counts = 230.6 Rate = 0.1 +/- 0.004 [Thu Jul 12 01:46:42 2012] Off-axis axis estimate = 4.51' [Thu Jul 12 01:54:04 2012] Using EEF radius (= 8.68 ")to estimate initial spatial extent for simple fitting [Thu Jul 12 01:54:04 2012] Initial guess for spatial extent in simple fitting = 8.68" [Thu Jul 12 01:54:04 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.003 [Thu Jul 12 01:54:04 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 8.68" [Thu Jul 12 06:50:26 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src2.ximg exists [Thu Jul 12 06:50:26 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src2_1.ximg exists [Thu Jul 12 06:50:26 2012] Fit fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src2 appears to have run properly [Thu Jul 12 06:50:28 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists [Thu Jul 12 06:50:28 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists [Thu Jul 12 06:50:28 2012] Fit fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly [Thu Jul 12 22:33:50 2012] Spatial fit model total counts = 11090.300000, observed total counts = 11167.000000 [Thu Jul 12 22:33:50 2012] Offset between fit and detection position for source 2 = 0.866575 pixels [Thu Jul 12 22:33:50 2012] 11052.480000 total counts/ 8708.970000 bgd. counts: snr = 25.112122 Spatial fit parameters: Offset between fit and detection position for source 2 = 0.866575 pixels Position = (243.4, 327.8) = 15 4 0.15 -41 47 29.4 Extent = 17.4 (17.4-34.7)" x 7.5 (6.9-8.0)", rotation angle = 114 (111-117) degrees Source counts = 2343.5 +/- 105.1 Background counts = 8709.0 Rate = 0.1 +/- 0.006 [Thu Jul 12 22:33:51 2012] Vigneting correction estimate = 1.000000 [Thu Jul 12 22:33:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Jul 12 22:33:51 2012] Assessing source extent using major axis lower bound [Thu Jul 12 22:33:51 2012] Source does appear to be extended [Thu Jul 12 22:33:51 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.18 [Thu Jul 12 22:33:51 2012] Source is asymmetric [Thu Jul 12 22:33:52 2012] Source is confused with source 28 [Thu Jul 12 22:33:52 2012] Source is confused with source 32 [Thu Jul 12 22:33:52 2012] Source is confused with source 33 [Thu Jul 12 22:35:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Thu Jul 12 22:35:19 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Thu Jul 12 22:35:19 2012] Initial guess for spatial extent in simple fitting = 12.44" [Thu Jul 12 22:35:19 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.085 [Thu Jul 12 22:35:19 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.44" [Fri Jul 13 04:58:19 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src1.ximg exists [Fri Jul 13 04:58:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src1.csv [Fri Jul 13 04:58:19 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src1_1.ximg exists [Fri Jul 13 04:58:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src1.csv [Fri Jul 13 04:58:19 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Jul 13 04:58:21 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Fri Jul 13 04:58:22 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Fri Jul 13 04:58:22 2012] Fit fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly [Fri Jul 13 22:14:40 2012] Spatial fit model total counts = 21064.300000, observed total counts = 19461.000000 [Fri Jul 13 22:14:40 2012] Offset between fit and detection position for source 2 = 0.534246 pixels [Fri Jul 13 22:14:40 2012] 21522.515000 total counts/ 20566.600000 bgd. counts: snr = 6.665581 Spatial fit parameters: Offset between fit and detection position for source 2 = 0.534246 pixels Position = (243.6, 328.3) = 15 4 0.08 -41 47 27.2 Extent = 8.6 (8.1-9.2)", rotation angle = 0 Source counts = 955.9 +/- 146.7 Background counts = 20566.6 Rate = 0.06 +/- 0.009 [Fri Jul 13 22:14:41 2012] Vigneting correction estimate = 1.000000 [Fri Jul 13 22:14:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Jul 13 22:14:41 2012] Assessing source extent using major axis lower bound [Fri Jul 13 22:14:41 2012] Source does appear to be extended [Fri Jul 13 22:14:41 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Jul 13 22:16:09 2012] XMMSAS src. selection expression = ellipse(21144.885200, 28514.516820, 518.964615, 518.964615, 0.000000, X, Y) [Fri Jul 13 22:16:09 2012] Writing source region out to fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src2_src.reg [Fri Jul 13 22:16:09 2012] Extracting stamp from image fullrun_pn_xmm0143980201_pi300-10000_cl_sm2.00.img.gz, (214, 298) - (273, 358) [Fri Jul 13 22:16:09 2012] XMMSAS bgd. selection expression = annulus(21144.885200, 28514.516820, 864.941025, 1729.882050, X, Y) && !ellipse(20044.016000, 24416.318000, 8401.488242, 8401.488242, 0.000000, X, Y) && !ellipse(25380.046000, 31475.314000, 2794.144080, 2794.144080, 0.000000, X, Y) && !ellipse(21655.826000, 30504.986000, 835.016024, 835.016024, 0.000000, X, Y) && !ellipse(21345.862000, 29052.432000, 1395.280040, 1395.280040, 0.000000, X, Y) && !ellipse(22610.616547, 28829.762482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22305.861664, 28480.851807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22081.852000, 28207.544000, 1323.800038, 1323.800038, 0.000000, X, Y) && !ellipse(20936.759964, 27876.336151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22436.597961, 26652.208344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21023.429413, 26572.427368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20134.495071, 26310.946808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22479.503235, 26143.515350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20146.782547, 27209.589264, 870.000000, 870.000000, 0.000000, X, Y) [Fri Jul 13 22:16:09 2012] Writing fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src2.gif [Fri Jul 13 22:16:38 2012] Mean detx,y = (-4872.01, -2311.54) [Fri Jul 13 22:16:40 2012] Setting backscal keywords in source and bgd. spectrum [Fri Jul 13 22:16:59 2012] Binned source spectrum to 10 counts/bin [Fri Jul 13 22:16:59 2012] Setting source spectrum file to fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src2_src_b10.pi.gz [Fri Jul 13 22:16:59 2012] Setting bgd. spectrum file to fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src2_bgd.pi.gz [Sat Jul 14 20:24:34 2012] Updating aperture counts using extracted products [Sat Jul 14 20:24:35 2012] Error reading totcts from fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src2_src_b10.pi.gz [Sat Jul 14 20:24:39 2012] Calculating source flux in energy range 0.30-8.00 [Sat Jul 14 20:24:39 2012] Using photon index=1.80, rate=0.0578, arf fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src2.arf [Sat Jul 14 20:24:39 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jul 14 20:24:39 2012] Updating source flux to 2.2e-13 [Sat Jul 14 20:44:28 2012] Flag c found in src. 2 procflags, skipping spectral fitting [Sat Jul 14 20:52:44 2012] Reading fit data from xmm0143980201/analysis//spectral/fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src2_pl.csv [Sat Jul 14 20:52:44 2012] Spectral fit parameter nH value = 8.65971e+20 [Sat Jul 14 20:52:44 2012] Spectral fit parameter PhoIndex value = 2.38057 [Sat Jul 14 20:52:44 2012] Failed to get F(0.3-8.0) from xmm0143980201/analysis//spectral/fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected [Sat Jul 14 20:52:44 2012] Calculating source flux in energy range 0.30-8.00 [Sat Jul 14 20:52:44 2012] Using Nh = 8.7e+20, photon index=2.38, rate=0.0578, arf fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src2.arf [Sat Jul 14 20:52:44 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jul 14 20:52:44 2012] Updating source flux to 1.9e-13