[Thu Jul 12 01:46:34 2012] Detection parameters:
  Position = (306.0, 384.1) = 15 3 35.83 -41 43 24.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 814.3 +/- 48.0
  Background counts = 407.3
  Rate = 0.04 +/- 0.003

[Thu Jul 12 01:46:42 2012] Off-axis axis estimate = 6.23'
[Thu Jul 12 01:54:04 2012] Using EEF radius (= 9.55 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 01:54:04 2012] Initial guess for spatial extent in simple fitting = 9.55"
[Thu Jul 12 01:54:04 2012] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.240
[Thu Jul 12 01:54:04 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 9.55"
[Thu Jul 12 06:50:26 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src18.ximg exists
[Thu Jul 12 06:50:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src18.csv
[Thu Jul 12 06:50:26 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src18_1.ximg exists
[Thu Jul 12 06:50:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src18.csv
[Thu Jul 12 06:50:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 06:50:28 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Thu Jul 12 06:50:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src18.csv
[Thu Jul 12 06:50:28 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Thu Jul 12 06:50:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src18.csv
[Thu Jul 12 06:50:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 22:33:50 2012] Spatial fit model total counts = 8473.650000, observed total counts = 9956.000000
[Thu Jul 12 22:33:50 2012] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jul 12 22:33:51 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 22:33:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 22:33:51 2012] Assessing source extent using major
[Thu Jul 12 22:33:51 2012] Source does appear to be extended
[Thu Jul 12 22:33:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 22:35:19 2012] Using EEF radius (= 9.55 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 22:35:19 2012] Initial guess for spatial extent in simple fitting = 9.55"
[Thu Jul 12 22:35:19 2012] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.240
[Thu Jul 12 22:35:19 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 9.55"
[Fri Jul 13 04:58:20 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src17.ximg exists
[Fri Jul 13 04:58:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src17.csv
[Fri Jul 13 04:58:20 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri Jul 13 04:58:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src17.csv
[Fri Jul 13 04:58:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 04:58:22 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri Jul 13 04:58:22 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Jul 13 04:58:22 2012] Fit fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Fri Jul 13 22:14:41 2012] Spatial fit model total counts = 9950.570000, observed total counts = 9956.000000
[Fri Jul 13 22:14:41 2012] Offset between fit and detection position for source 18 = 8.930321 pixels
[Fri Jul 13 22:14:41 2012] 9660.898000 total counts/ 8820.510000 bgd. counts: snr = 8.948145
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 8.930321 pixels
  Position = (311.2, 376.9) = 15 3 33.77 -41 43 56.0
  Extent = 19.1 (19.1-38.2)", rotation angle = 0
  Source counts = 840.4 +/- 98.3
  Background counts = 8820.5
  Rate = 0.05 +/- 0.006
[Fri Jul 13 22:14:41 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 22:14:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 22:14:41 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 22:14:41 2012] Source does appear to be extended
[Fri Jul 13 22:14:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 22:14:41 2012] Source is confused with source 22
[Fri Jul 13 22:14:41 2012] Source is confused with source 25
[Fri Jul 13 22:14:41 2012] Source is confused with source 75
[Fri Jul 13 22:16:12 2012] XMMSAS src. selection expression = ellipse(27029.524000, 32740.374000, 1145.418033, 1145.418033, 0.000000, X, Y)
[Fri Jul 13 22:16:12 2012] Writing source region out to fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src18_src.reg
[Fri Jul 13 22:16:12 2012] Extracting stamp from image fullrun_pn_xmm0143980201_pi300-10000_cl_sm2.00.img.gz, (245, 311) - (377, 443)
[Fri Jul 13 22:16:12 2012] XMMSAS bgd. selection expression = annulus(27029.524000, 32740.374000, 1909.030055, 3818.060110, X, Y) && !ellipse(20044.016000, 24416.318000, 8401.488242, 8401.488242, 0.000000, X, Y) && !ellipse(25959.104000, 34533.528000, 1612.488046, 1612.488046, 0.000000, X, Y) && !ellipse(29568.828000, 35339.101800, 1711.296049, 1711.296049, 0.000000, X, Y) && !ellipse(31293.287170, 35698.238312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28358.208000, 34940.568000, 1707.464049, 1707.464049, 0.000000, X, Y) && !ellipse(24087.205400, 33679.096000, 1306.360038, 1306.360038, 0.000000, X, Y) && !ellipse(31250.881400, 34135.812000, 1691.104049, 1691.104049, 0.000000, X, Y) && !ellipse(23100.612823, 33265.881012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25002.566956, 33015.647156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24398.831879, 32493.185181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26154.815155, 32236.741211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24632.462000, 30649.884000, 1397.072040, 1397.072040, 0.000000, X, Y) && !ellipse(25380.046000, 31475.314000, 2794.144080, 2794.144080, 0.000000, X, Y) && !ellipse(23550.032288, 31630.558197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22610.616547, 28829.762482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23983.699463, 30237.947540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22081.852000, 28207.544000, 1323.800038, 1323.800038, 0.000000, X, Y) && !ellipse(28847.285675, 35705.287415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31006.023621, 34931.447266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28966.000000, 33638.729431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28515.720000, 33313.932000, 1582.160046, 1582.160046, 0.000000, X, Y) && !ellipse(27880.451447, 33174.640930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29634.939941, 33872.749023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31084.686829, 33041.215088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27997.190430, 30488.356628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26277.673981, 28245.902954, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 13 22:16:12 2012] Writing fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src18.gif
[Fri Jul 13 23:22:29 2012] Mean detx,y = (1853.47, -4777.42) 
[Fri Jul 13 23:22:32 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 13 23:23:12 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 13 23:23:13 2012] Setting source spectrum file to fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Fri Jul 13 23:23:13 2012] Setting bgd. spectrum file to fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sat Jul 14 20:24:35 2012] Updating aperture counts using extracted products
[Sat Jul 14 20:24:35 2012] Error reading totcts from fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sat Jul 14 20:24:40 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 20:24:40 2012] Using photon index=1.80, rate=0.0508, arf fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src18.arf
[Sat Jul 14 20:24:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 20:24:40 2012] Updating source flux to 1.5e-13
[Sat Jul 14 20:44:28 2012] Flag p found in src. 18 procflags, skipping spectral fitting
[Sat Jul 14 20:44:28 2012] Flag c found in src. 18 procflags, skipping spectral fitting