[Thu Jul 12 01:46:34 2012] Detection parameters:
  Position = (324.2, 403.2) = 15 3 28.74 -41 42 0.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1419.6 +/- 53.6
  Background counts = 336.4
  Rate = 0.09 +/- 0.003

[Thu Jul 12 01:46:42 2012] Off-axis axis estimate = 7.82'
[Thu Jul 12 01:54:04 2012] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 01:54:04 2012] Initial guess for spatial extent in simple fitting = 10.34"
[Thu Jul 12 01:54:04 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.906
[Thu Jul 12 01:54:04 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 10.34"
[Thu Jul 12 06:50:26 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src15.ximg exists
[Thu Jul 12 06:50:26 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src15_1.ximg exists
[Thu Jul 12 06:50:26 2012] Fit fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_src15 appears to have run properly
[Thu Jul 12 06:50:28 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Thu Jul 12 06:50:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src15.csv
[Thu Jul 12 06:50:28 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Thu Jul 12 06:50:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src15.csv
[Thu Jul 12 06:50:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 22:33:50 2012] Warning, spatial fit 15 centroid is now closest to src. 60
[Thu Jul 12 22:33:51 2012] Spatial fit model total counts = 4783.350000, observed total counts = 4774.000000
[Thu Jul 12 22:33:51 2012] Offset between fit and detection position for source 15 = 4.808280 pixels
[Thu Jul 12 22:33:51 2012] Warning, changing simple spatial fit ID from 15 to 60
[Thu Jul 12 22:33:51 2012] 4514.473000 total counts/ 4000.070000 bgd. counts: snr = 8.133354
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 4.808280 pixels
  Position = (328.9, 404.2) = 15 3 26.91 -41 41 57.3
  Extent = 21.4 (19.1-42.7)" x 4.2 (2.7-7.0)", rotation angle = -0
  Source counts = 514.4 +/- 67.2
  Background counts = 4000.1
  Rate = 0.03 +/- 0.004
[Thu Jul 12 22:33:51 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 22:33:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 22:33:51 2012] Assessing source extent using major axis lower bound
[Thu Jul 12 22:33:51 2012] Source does appear to be extended
[Thu Jul 12 22:33:51 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.74
[Thu Jul 12 22:33:51 2012] Source is asymmetric
[Thu Jul 12 22:33:52 2012] Source is confused with source 12
[Thu Jul 12 22:35:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 12 22:35:19 2012] Initial guess for spatial extent in simple fitting = 12.80"
[Thu Jul 12 22:35:19 2012] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.033
[Thu Jul 12 22:35:19 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 12.80"
[Fri Jul 13 04:58:19 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src14.ximg exists
[Fri Jul 13 04:58:20 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src14_1.ximg exists
[Fri Jul 13 04:58:20 2012] Fit fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_src14 appears to have run properly
[Fri Jul 13 04:58:22 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Fri Jul 13 04:58:22 2012] fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Fri Jul 13 04:58:22 2012] Fit fullrun_pn_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Fri Jul 13 22:14:40 2012] Warning, spatial fit 14 centroid is now closest to src. 153
[Fri Jul 13 22:14:41 2012] Spatial fit model total counts = 4813.200000, observed total counts = 4774.000000
[Fri Jul 13 22:14:41 2012] Offset between fit and detection position for source 15 = 3.120774 pixels
[Fri Jul 13 22:14:41 2012] Warning, changing simple spatial fit ID from 14 to 58
[Fri Jul 13 22:14:41 2012] 4457.286000 total counts/ 3957.050000 bgd. counts: snr = 7.952234
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 3.120774 pixels
  Position = (326.5, 402.2) = 15 3 27.84 -41 42 6.0
  Extent = 21.3 (21.3-21.4)", rotation angle = 0
  Source counts = 500.2 +/- 66.8
  Background counts = 3957.1
  Rate = 0.03 +/- 0.004
[Fri Jul 13 22:14:41 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 22:14:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 22:14:41 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 22:14:41 2012] Source does appear to be extended
[Fri Jul 13 22:14:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 22:16:11 2012] XMMSAS src. selection expression = ellipse(28358.208000, 34940.568000, 1280.598037, 1280.598037, 0.000000, X, Y)
[Fri Jul 13 22:16:11 2012] Writing source region out to fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src15_src.reg
[Fri Jul 13 22:16:11 2012] Extracting stamp from image fullrun_pn_xmm0143980201_pi300-10000_cl_sm2.00.img.gz, (253, 329) - (400, 476)
[Fri Jul 13 22:16:11 2012] XMMSAS bgd. selection expression = annulus(28358.208000, 34940.568000, 2134.330061, 4268.660123, X, Y) && !ellipse(20044.016000, 24416.318000, 8401.488242, 8401.488242, 0.000000, X, Y) && !ellipse(25959.104000, 34533.528000, 1612.488046, 1612.488046, 0.000000, X, Y) && !ellipse(31964.884796, 35884.562958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32571.588196, 36039.428162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29568.828000, 35339.101800, 1711.296049, 1711.296049, 0.000000, X, Y) && !ellipse(33541.412000, 35987.076000, 1889.896054, 1889.896054, 0.000000, X, Y) && !ellipse(31293.287170, 35698.238312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24087.205400, 33679.096000, 1306.360038, 1306.360038, 0.000000, X, Y) && !ellipse(31250.881400, 34135.812000, 1691.104049, 1691.104049, 0.000000, X, Y) && !ellipse(27029.524000, 32740.374000, 1527.224044, 1527.224044, 0.000000, X, Y) && !ellipse(25002.566956, 33015.647156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24398.831879, 32493.185181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26154.815155, 32236.741211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24632.462000, 30649.884000, 1397.072040, 1397.072040, 0.000000, X, Y) && !ellipse(25380.046000, 31475.314000, 2794.144080, 2794.144080, 0.000000, X, Y) && !ellipse(23550.032288, 31630.558197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23983.699463, 30237.947540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28847.285675, 35705.287415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34480.418000, 36050.722600, 1933.504056, 1933.504056, 0.000000, X, Y) && !ellipse(31006.023621, 34931.447266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33184.488434, 34480.081665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32072.344452, 34566.157715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32587.979180, 34455.040200, 682.348020, 682.348020, 0.000000, X, Y) && !ellipse(28966.000000, 33638.729431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28515.720000, 33313.932000, 1582.160046, 1582.160046, 0.000000, X, Y) && !ellipse(27880.451447, 33174.640930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32386.644165, 35277.522369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29634.939941, 33872.749023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32228.967285, 33173.016052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31084.686829, 33041.215088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32734.567169, 33022.566162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27997.190430, 30488.356628, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 13 22:16:11 2012] Writing fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src15.gif
[Fri Jul 13 23:07:41 2012] Mean detx,y = (3795.68, -6419.62) 
[Fri Jul 13 23:07:44 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 13 23:08:49 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 13 23:08:50 2012] Setting source spectrum file to fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Fri Jul 13 23:08:50 2012] Setting bgd. spectrum file to fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sat Jul 14 20:24:35 2012] Updating aperture counts using extracted products
[Sat Jul 14 20:24:35 2012] Error reading totcts from fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sat Jul 14 20:24:40 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 20:24:40 2012] Using photon index=1.80, rate=0.0302, arf fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src15.arf
[Sat Jul 14 20:24:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 20:24:40 2012] Updating source flux to 1e-13
[Sat Jul 14 20:44:28 2012] Flag c found in src. 15 procflags, skipping spectral fitting