[Thu Jul 12 01:46:37 2012] Detection parameters:
  Position = (238.3, 154.2) = 15 4 2.21 -42 0 1.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 235.7 +/- 33.4
  Background counts = 263.2
  Rate = 0.009 +/- 0.001

[Thu Jul 12 01:46:42 2012] Off-axis axis estimate = 11.33'
[Thu Jul 12 01:54:04 2012] Using EEF radius (= 12.09 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 01:54:04 2012] Initial guess for spatial extent in simple fitting = 12.09"
[Thu Jul 12 01:54:04 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.976
[Thu Jul 12 01:54:04 2012] Giving source the simple spatial ID 109 for pass 0, mean size = 12.09"
[Thu Jul 12 22:33:51 2012] Spatial fit model total counts = 3591.960000, observed total counts = 3586.000000
[Thu Jul 12 22:33:51 2012] Offset between fit and detection position for source 113 = 2.470336 pixels
[Thu Jul 12 22:33:51 2012] Warning, changing simple spatial fit ID from 109 to 57
[Thu Jul 12 22:33:51 2012] 3573.020000 total counts/ 2209.420000 bgd. counts: snr = 29.010008
Spatial fit parameters:
  Offset between fit and detection position for source 113 = 2.470336 pixels
  Position = (235.9, 154.5) = 15 4 3.17 -42 0 3.2
  Extent = 24.4 (24.3-48.7)", rotation angle = 0
  Source counts = 1363.6 +/- 59.8
  Background counts = 2209.4
  Rate = 0.08 +/- 0.004
[Thu Jul 12 22:33:51 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 22:33:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 22:33:51 2012] Assessing source extent using major axis lower bound
[Thu Jul 12 22:33:51 2012] Source does appear to be extended
[Thu Jul 12 22:33:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 22:33:52 2012] Source is confused with source 43
[Thu Jul 12 22:35:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 12 22:35:19 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 12 22:35:19 2012] Initial guess for spatial extent in simple fitting = 24.36"
[Thu Jul 12 22:35:19 2012] source mask rpix=5.6, npix_max = 148, mask sum = 156, frac = 1.048
[Thu Jul 12 22:35:19 2012] Giving source the simple spatial ID 105 for pass 1, mean size = 24.36"
[Fri Jul 13 22:14:41 2012] Spatial fit model total counts = 3590.290000, observed total counts = 3586.000000
[Fri Jul 13 22:14:41 2012] Offset between fit and detection position for source 113 = 0.254630 pixels
[Fri Jul 13 22:14:41 2012] Warning, changing simple spatial fit ID from 105 to 55
[Fri Jul 13 22:14:41 2012] 3575.190000 total counts/ 2275.950000 bgd. counts: snr = 27.233786
Spatial fit parameters:
  Offset between fit and detection position for source 113 = 0.254630 pixels
  Position = (235.6, 154.6) = 15 4 3.25 -42 0 2.7
  Extent = 24.4 (24.3-48.7)", rotation angle = 0
  Source counts = 1299.2 +/- 59.8
  Background counts = 2275.9
  Rate = 0.08 +/- 0.004
[Fri Jul 13 22:14:41 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 22:14:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 22:14:41 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 22:14:41 2012] Source does appear to be extended
[Fri Jul 13 22:14:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 22:16:20 2012] Counts = 1299.240000, rescaling region sizes by 2.000000
[Fri Jul 13 22:16:20 2012] XMMSAS src. selection expression = ellipse(20452.684000, 13403.568800, 2923.392084, 2923.392084, 0.000000, X, Y)
[Fri Jul 13 22:16:20 2012] Writing source region out to fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src113_src.reg
[Fri Jul 13 22:16:20 2012] Extracting stamp from image fullrun_pn_xmm0143980201_pi300-10000_cl_sm2.00.img.gz, (68, 0) - (404, 323)
[Fri Jul 13 22:16:21 2012] XMMSAS bgd. selection expression = annulus(20452.684000, 13403.568800, 9744.640280, 19489.280561, X, Y) && !ellipse(21144.885200, 28514.516820, 691.952820, 691.952820, 0.000000, X, Y) && !ellipse(20317.997800, 25160.640800, 1400.248040, 1400.248040, 0.000000, X, Y) && !ellipse(19499.830231, 22992.582336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19180.741466, 22064.698180, 1536.408044, 774.424188, 90.000000, X, Y) && !ellipse(20044.016000, 24416.318000, 8401.488242, 8401.488242, 0.000000, X, Y) && !ellipse(19069.735600, 21437.388000, 1309.760038, 1309.760038, 0.000000, X, Y) && !ellipse(19951.992380, 11787.812200, 978.280028, 978.280028, 0.000000, X, Y) && !ellipse(24087.205400, 33679.096000, 1306.360038, 1306.360038, 0.000000, X, Y) && !ellipse(31250.881400, 34135.812000, 1691.104049, 1691.104049, 0.000000, X, Y) && !ellipse(27029.524000, 32740.374000, 1527.224044, 1527.224044, 0.000000, X, Y) && !ellipse(23100.612823, 33265.881012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25002.566956, 33015.647156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24398.831879, 32493.185181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26154.815155, 32236.741211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24632.462000, 30649.884000, 1397.072040, 1397.072040, 0.000000, X, Y) && !ellipse(21985.880188, 31169.029144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25380.046000, 31475.314000, 2794.144080, 2794.144080, 0.000000, X, Y) && !ellipse(23550.032288, 31630.558197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21655.826000, 30504.986000, 835.016024, 835.016024, 0.000000, X, Y) && !ellipse(21345.862000, 29052.432000, 1395.280040, 1395.280040, 0.000000, X, Y) && !ellipse(22610.616547, 28829.762482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23983.699463, 30237.947540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22305.861664, 28480.851807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22081.852000, 28207.544000, 1323.800038, 1323.800038, 0.000000, X, Y) && !ellipse(20936.759964, 27876.336151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22436.597961, 26652.208344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21023.429413, 26572.427368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20134.495071, 26310.946808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22479.503235, 26143.515350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20765.992600, 25782.040400, 687.531220, 687.531220, 0.000000, X, Y) && !ellipse(21279.874000, 24983.506000, 1298.096037, 1298.096037, 0.000000, X, Y) && !ellipse(20099.322200, 25936.237600, 607.869617, 607.869617, 0.000000, X, Y) && !ellipse(22874.993744, 25443.378815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22107.092200, 23863.351600, 744.208821, 744.208821, 0.000000, X, Y) && !ellipse(20972.466125, 12223.492783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26970.527771, 22581.724518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21765.996200, 21073.579400, 1392.784040, 1392.784040, 0.000000, X, Y) && !ellipse(18919.730225, 20137.427551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18821.970718, 19619.736664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18999.504562, 18835.273743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18235.452179, 18477.928040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19188.348000, 18028.656000, 1704.528049, 1704.528049, 0.000000, X, Y) && !ellipse(18830.177400, 17391.498000, 1715.152049, 1123.216032, 90.572153, X, Y) && !ellipse(18221.086282, 18171.242000, 1515.920044, 1515.920044, 0.000000, X, Y) && !ellipse(18837.238500, 17184.103980, 800.712023, 800.712023, 0.000000, X, Y) && !ellipse(23522.741241, 12064.530869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18862.661697, 14903.884247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19996.635330, 13443.279617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18916.513657, 12046.181961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37925.787000, 34696.884680, 2018.016058, 1074.024031, 44.082200, X, Y) && !ellipse(28966.000000, 33638.729431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38610.128000, 34332.748000, 3092.040089, 3092.040089, 0.000000, X, Y) && !ellipse(39120.849854, 33690.940582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28515.720000, 33313.932000, 1582.160046, 1582.160046, 0.000000, X, Y) && !ellipse(27880.451447, 33174.640930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34723.756800, 33006.115200, 1780.176051, 1780.176051, 0.000000, X, Y) && !ellipse(20146.782547, 27209.589264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23029.465000, 22764.560000, 757.792822, 757.792822, 0.000000, X, Y) && !ellipse(21336.318000, 22410.032000, 1007.312029, 1007.312029, 0.000000, X, Y) && !ellipse(32011.000000, 22137.782379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21986.031525, 21612.265793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22588.055200, 21534.692600, 810.296023, 810.296023, 0.000000, X, Y) && !ellipse(22835.646210, 11884.907516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36292.404663, 20550.457184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28192.305600, 20073.967800, 781.999223, 781.999223, 0.000000, X, Y) && !ellipse(21054.357849, 20051.555939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27920.740000, 19102.840000, 1539.336044, 1539.336044, 0.000000, X, Y) && !ellipse(28130.584412, 18581.202042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19735.440186, 17803.655472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29659.700000, 17047.948000, 1641.960047, 1086.056031, 219.531000, X, Y) && !ellipse(19670.119827, 17089.049026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30092.539551, 17435.575485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18798.018372, 16573.774216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27051.992035, 16806.001663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18785.999054, 15874.631989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30138.338806, 15965.305222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28226.882324, 15879.547775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33005.409363, 15665.243103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29807.477020, 15444.267670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18554.035400, 15452.828000, 1849.544053, 1849.544053, 0.000000, X, Y) && !ellipse(19995.419327, 15435.301636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18406.809097, 14755.619446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30876.166138, 15104.364182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27275.617188, 14813.438019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23464.592400, 15022.296200, 1720.344050, 848.752024, 248.443000, X, Y) && !ellipse(29599.402374, 14488.170380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18593.447037, 13973.183640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29681.729523, 13741.874832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27799.348267, 14045.766830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19275.942230, 13412.695007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18897.370895, 13267.391891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22671.822937, 12453.637360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18854.026215, 12477.017548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21956.721329, 11960.071396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24082.705505, 12096.566452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21127.863663, 11306.194763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32228.967285, 33173.016052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38034.127777, 33280.597839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31084.686829, 33041.215088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39309.816254, 32853.578857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32734.567169, 33022.566162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33632.429047, 31726.795044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27997.190430, 30488.356628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26277.673981, 28245.902954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29652.040985, 27668.134064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34761.905060, 27517.469116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30631.205170, 26926.411804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31636.914337, 26394.258972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34707.997345, 26102.391602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32729.944763, 25862.278717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36490.034424, 26126.693085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26336.886444, 25533.137390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29530.464539, 25615.857483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25433.494141, 25552.564240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33175.179901, 25537.459778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28059.413696, 25419.523376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35819.002319, 25369.794678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28551.600372, 25182.976196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30011.200073, 25020.631775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31281.849304, 25024.593079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33862.638672, 24223.106110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29983.858582, 24488.643555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32423.636688, 24214.689667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30391.793213, 24217.811981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34365.450775, 24206.432526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30353.409454, 23794.948120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38777.278442, 22239.039886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34507.083313, 21955.734985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22193.447723, 20323.099060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35624.101929, 20035.883301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25889.367981, 19840.308533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36342.226288, 19429.856934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25138.000000, 19296.773590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29448.771942, 18830.125641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24119.358185, 18650.348297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29781.930328, 18212.167572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28276.374725, 17971.985657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28136.114838, 17196.370621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28488.978851, 16526.549210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36413.346558, 16041.600143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23235.005096, 16217.036514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35580.519623, 15958.347717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29142.928497, 16122.940948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26937.955872, 15791.518951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29389.986938, 15191.711990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27235.162506, 14397.771942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26704.002655, 14410.437759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31247.320648, 14245.723724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28553.631470, 14123.224655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29186.481598, 13871.489380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24010.122314, 12837.014297, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 13 22:16:21 2012] Writing fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src113.gif
[Sat Jul 14 02:01:02 2012] Mean detx,y = (-9678.43, 11612.20) 
[Sat Jul 14 02:01:06 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 02:06:41 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 02:06:41 2012] Setting source spectrum file to fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src113_src_b10.pi.gz
[Sat Jul 14 02:06:41 2012] Setting bgd. spectrum file to fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src113_bgd.pi.gz
[Sat Jul 14 20:24:38 2012] Updating aperture counts using extracted products
[Sat Jul 14 20:24:38 2012] Error reading totcts from fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src113_src_b10.pi.gz
[Sat Jul 14 20:24:42 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 20:24:42 2012] Using photon index=1.80, rate=0.0785, arf fullrun_pn_xmm0143980201_pi300-10000_pass1_cl_src113.arf
[Sat Jul 14 20:24:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 20:24:43 2012] Updating source flux to 4.6e-13
[Sat Jul 14 20:44:28 2012] Flag c found in src. 113 procflags, skipping spectral fitting