[Thu Jul 12 01:49:02 2012] Detection parameters:
  Position = (228.0, 222.2) = 15 4 6.19 -41 55 9.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 261.6 +/- 29.1
  Background counts = 178.2
  Rate = 0.009 +/- 0.001

[Thu Jul 12 01:49:05 2012] Off-axis axis estimate = 7.52'
[Thu Jul 12 12:56:10 2012] Using EEF radius (= 10.19 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 12:56:10 2012] Initial guess for spatial extent in simple fitting = 10.19"
[Thu Jul 12 12:56:10 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.114
[Thu Jul 12 12:56:10 2012] Giving source the simple spatial ID 107 for pass 0, mean size = 10.19"
[Thu Jul 12 22:34:38 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 22:34:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 22:34:38 2012] Assessing source extent using major
[Thu Jul 12 22:34:38 2012] Source does appear to be extended
[Thu Jul 12 22:34:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 12:50:38 2012] Using EEF radius (= 10.19 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 12:50:38 2012] Initial guess for spatial extent in simple fitting = 10.19"
[Fri Jul 13 12:50:38 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.114
[Fri Jul 13 12:50:38 2012] Giving source the simple spatial ID 98 for pass 1, mean size = 10.19"
[Fri Jul 13 22:14:10 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src98.ximg exists
[Fri Jul 13 22:14:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src98.csv
[Fri Jul 13 22:14:10 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src98_1.ximg exists
[Fri Jul 13 22:14:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src98.csv
[Fri Jul 13 22:14:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src98_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src98.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 22:14:13 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src98.ximg exists
[Fri Jul 13 22:14:13 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src98_1.ximg exists
[Fri Jul 13 22:14:13 2012] Fit fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src98 appears to have run properly
[Fri Jul 13 22:15:27 2012] Spatial fit model total counts = 4019.070000, observed total counts = 4019.000000
[Fri Jul 13 22:15:27 2012] Offset between fit and detection position for source 93 = 2.131027 pixels
[Fri Jul 13 22:15:27 2012] Warning, changing simple spatial fit ID from 98 to 18
[Fri Jul 13 22:15:27 2012] 3703.750020 total counts/ 3703.750000 bgd. counts: snr = 0.000000
Spatial fit parameters:
  Offset between fit and detection position for source 93 = 2.131027 pixels
  Position = (226.4, 223.6) = 15 4 6.82 -41 55 2.7
  Extent = 20.5 (20.4-40.9)", rotation angle = 0
  Source counts = 0.0 +/- 60.9
  Background counts = 3703.8
  Rate = 8e-10 +/- 0.002
  Deleting source due to low Poisson probability