[Thu Jul 12 01:49:01 2012] Detection parameters:
  Position = (239.4, 253.8) = 15 4 1.75 -41 52 45.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 287.9 +/- 28.1
  Background counts = 177.5
  Rate = 0.02 +/- 0.002

[Thu Jul 12 01:49:05 2012] Off-axis axis estimate = 5.37'
[Thu Jul 12 12:56:10 2012] Using EEF radius (= 9.11 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 12:56:10 2012] Initial guess for spatial extent in simple fitting = 9.11"
[Thu Jul 12 12:56:10 2012] source mask rpix=2.1, npix_max = 26, mask sum = 23, frac = 0.854
[Thu Jul 12 12:56:10 2012] Giving source the simple spatial ID 68 for pass 0, mean size = 9.11"
[Thu Jul 12 22:33:20 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src68.ximg exists
[Thu Jul 12 22:33:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src68.csv
[Thu Jul 12 22:33:21 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src68_1.ximg exists
[Thu Jul 12 22:33:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src68.csv
[Thu Jul 12 22:33:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 22:33:24 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src68.ximg exists
[Thu Jul 12 22:33:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src68.csv
[Thu Jul 12 22:33:24 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src68_1.ximg exists
[Thu Jul 12 22:33:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src68.csv
[Thu Jul 12 22:33:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 22:34:38 2012] Warning, spatial fit 68 centroid is now closest to src. 169
[Thu Jul 12 22:34:38 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 22:34:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 22:34:38 2012] Assessing source extent using major
[Thu Jul 12 22:34:38 2012] Source does appear to be extended
[Thu Jul 12 22:34:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 12:50:38 2012] Using EEF radius (= 9.11 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 12:50:38 2012] Initial guess for spatial extent in simple fitting = 9.11"
[Fri Jul 13 12:50:38 2012] source mask rpix=2.1, npix_max = 26, mask sum = 23, frac = 0.854
[Fri Jul 13 12:50:38 2012] Giving source the simple spatial ID 64 for pass 1, mean size = 9.11"
[Fri Jul 13 22:14:09 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src64.ximg exists
[Fri Jul 13 22:14:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src64.csv
[Fri Jul 13 22:14:09 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src64_1.ximg exists
[Fri Jul 13 22:14:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src64.csv
[Fri Jul 13 22:14:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src64_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 22:14:12 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src64.ximg exists
[Fri Jul 13 22:14:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src64.csv
[Fri Jul 13 22:14:12 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src64_1.ximg exists
[Fri Jul 13 22:14:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src64.csv
[Fri Jul 13 22:14:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src64_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 22:15:28 2012] Source 85 is offset by -2.908763 and 7.133495 pixels which is larger than
2 X fitted extent = 1.047517 x 1.047517, not incorporating fit results
[Fri Jul 13 22:15:28 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 22:15:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 22:15:28 2012] Assessing source extent using major
[Fri Jul 13 22:15:28 2012] Source does appear to be extended
[Fri Jul 13 22:15:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 13:10:58 2012] XMMSAS src. selection expression = ellipse(20776.669662, 22028.042053, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 14 13:10:58 2012] Writing source region out to fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src85_src.reg
[Sat Jul 14 13:10:58 2012] Extracting stamp from image fullrun_mos2_xmm0143980201_pi300-10000_cl_sm2.00.img.gz, (202, 216) - (277, 291)
[Sat Jul 14 13:10:58 2012] XMMSAS bgd. selection expression = annulus(20776.669662, 22028.042053, 1087.500000, 2175.000000, X, Y) && !ellipse(19633.288400, 23484.216000, 1458.192042, 1458.192042, 0.000000, X, Y) && !ellipse(20134.601273, 24560.817871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19444.778000, 22971.832000, 1473.608042, 1244.248036, 90.000000, X, Y) && !ellipse(19448.002000, 22645.814000, 1552.160045, 1552.160045, 0.000000, X, Y) && !ellipse(19030.667880, 21128.954000, 1441.448041, 1441.448041, 0.000000, X, Y) && !ellipse(19984.922000, 23943.940000, 1366.360039, 1366.360039, 0.000000, X, Y) && !ellipse(18923.423800, 20845.718000, 1320.360038, 1320.360038, 0.000000, X, Y) && !ellipse(18822.314060, 20091.660000, 1661.000048, 1661.000048, 0.000000, X, Y) && !ellipse(19513.134583, 19958.021912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18824.467773, 19613.907547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21615.742554, 22316.253448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21745.657120, 23521.347351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21686.544220, 22750.302948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22800.326800, 25376.896000, 1219.664035, 1219.664035, 0.000000, X, Y) && !ellipse(21846.516373, 21449.228409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20421.150620, 20738.384140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22168.256200, 20991.118400, 1419.048041, 1419.048041, 0.000000, X, Y) && !ellipse(22178.438000, 23561.491200, 1349.120039, 1349.120039, 0.000000, X, Y) && !ellipse(22247.087280, 24488.784271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22627.112244, 21439.727386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21467.218887, 20730.063278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23032.503357, 24684.943146, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 14 13:10:58 2012] Writing fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src85.gif
[Sat Jul 14 15:54:35 2012] Mean detx,y = (7288.69, -3915.15) 
[Sat Jul 14 15:54:36 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 15:54:50 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 15:54:50 2012] Setting source spectrum file to fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Sat Jul 14 15:54:50 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src85_bgd.pi.gz
[Sat Jul 14 19:23:31 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul 14 19:23:31 2012] rmf not generated due to insufficient counts
[Sat Jul 14 20:24:54 2012] Updating aperture counts using extracted products
[Sat Jul 14 20:24:54 2012] Error reading totcts from fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Sat Jul 14 20:24:58 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 20:24:58 2012] Using photon index=1.80, rate=0.0172, arf fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src85.arf
[Sat Jul 14 20:24:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 20:24:58 2012] Updating source flux to 2.9e-13
[Sat Jul 14 20:34:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting