[Thu Jul 12 01:49:01 2012] Detection parameters:
  Position = (230.5, 292.7) = 15 4 5.20 -41 50 0.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 767.7 +/- 37.8
  Background counts = 132.8
  Rate = 0.04 +/- 0.002

[Thu Jul 12 01:49:04 2012] Off-axis axis estimate = 4.95'
[Thu Jul 12 12:56:10 2012] Using EEF radius (= 8.90 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 12:56:10 2012] Initial guess for spatial extent in simple fitting = 8.90"
[Thu Jul 12 12:56:10 2012] source mask rpix=2.0, npix_max = 25, mask sum = 24, frac = 0.925
[Thu Jul 12 12:56:10 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 8.90"
[Thu Jul 12 22:33:19 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src27.ximg exists
[Thu Jul 12 22:33:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src27.csv
[Thu Jul 12 22:33:19 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src27_1.ximg exists
[Thu Jul 12 22:33:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src27.csv
[Thu Jul 12 22:33:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 22:33:22 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Thu Jul 12 22:33:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src27.csv
[Thu Jul 12 22:33:22 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Thu Jul 12 22:33:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src27.csv
[Thu Jul 12 22:33:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 22:34:37 2012] Source 77 is offset by -1.523721 and -5.285590 pixels which is larger than
2 X fitted extent = 1.001278 x 1.001278, not incorporating fit results
[Thu Jul 12 22:34:37 2012] Source 77 is offset by 6.819753 and -6.208808 pixels which is larger than
2 X fitted extent = 3.790299 x 3.790299, not incorporating fit results
[Thu Jul 12 22:34:38 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 22:34:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 22:34:38 2012] Assessing source extent using major
[Thu Jul 12 22:34:38 2012] Source does appear to be extended
[Thu Jul 12 22:34:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 22:34:38 2012] Source is confused with source 78
[Fri Jul 13 12:50:38 2012] Using EEF radius (= 8.90 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 12:50:38 2012] Initial guess for spatial extent in simple fitting = 8.90"
[Fri Jul 13 12:50:38 2012] source mask rpix=2.0, npix_max = 25, mask sum = 24, frac = 0.925
[Fri Jul 13 12:50:38 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 8.90"
[Fri Jul 13 22:14:08 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src27.ximg exists
[Fri Jul 13 22:14:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src27.csv
[Fri Jul 13 22:14:08 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src27_1.ximg exists
[Fri Jul 13 22:14:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src27.csv
[Fri Jul 13 22:14:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 22:14:11 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Fri Jul 13 22:14:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src27.csv
[Fri Jul 13 22:14:11 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Fri Jul 13 22:14:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src27.csv
[Fri Jul 13 22:14:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 22:15:27 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 77 at 22.263726 pixels away
[Fri Jul 13 22:15:28 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 22:15:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 22:15:28 2012] Assessing source extent using major
[Fri Jul 13 22:15:28 2012] Source does appear to be extended
[Fri Jul 13 22:15:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 13:10:50 2012] XMMSAS src. selection expression = ellipse(20002.046280, 25418.543671, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 14 13:10:50 2012] Writing source region out to fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src77_src.reg
[Sat Jul 14 13:10:50 2012] Extracting stamp from image fullrun_mos2_xmm0143980201_pi300-10000_cl_sm2.00.img.gz, (193, 255) - (268, 330)
[Sat Jul 14 13:10:50 2012] XMMSAS bgd. selection expression = annulus(20002.046280, 25418.543671, 1087.500000, 2175.000000, X, Y) && !ellipse(19633.288400, 23484.216000, 1458.192042, 1458.192042, 0.000000, X, Y) && !ellipse(20134.601273, 24560.817871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19444.778000, 22971.832000, 1473.608042, 1244.248036, 90.000000, X, Y) && !ellipse(19448.002000, 22645.814000, 1552.160045, 1552.160045, 0.000000, X, Y) && !ellipse(19984.922000, 23943.940000, 1366.360039, 1366.360039, 0.000000, X, Y) && !ellipse(21032.230000, 28264.298800, 855.200025, 855.200025, 0.000000, X, Y) && !ellipse(21137.040000, 27031.928000, 1070.720031, 1070.720031, 0.000000, X, Y) && !ellipse(20827.386032, 26228.107239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22362.247230, 28533.617002, 1636.752047, 641.286152, 128.799767, X, Y) && !ellipse(20849.299160, 25962.522000, 1715.336049, 847.544024, 90.000000, X, Y) && !ellipse(20746.985400, 27803.760000, 1393.776040, 660.624019, 303.105000, X, Y) && !ellipse(20841.018280, 25109.054871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20189.698000, 26998.558000, 1393.776040, 1393.776040, 0.000000, X, Y) && !ellipse(22657.408000, 28815.982000, 2252.704065, 2252.704065, 0.000000, X, Y) && !ellipse(24232.748000, 30193.582000, 2798.400081, 2798.400081, 0.000000, X, Y) && !ellipse(21791.690018, 26488.191254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22640.641600, 26753.154000, 1066.832031, 1066.832031, 0.000000, X, Y) && !ellipse(22071.256638, 25613.988342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21745.657120, 23521.347351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21686.544220, 22750.302948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22800.326800, 25376.896000, 1219.664035, 1219.664035, 0.000000, X, Y) && !ellipse(22178.438000, 23561.491200, 1349.120039, 1349.120039, 0.000000, X, Y) && !ellipse(22247.087280, 24488.784271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23032.503357, 24684.943146, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 14 13:10:50 2012] Writing fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src77.gif
[Sat Jul 14 14:44:13 2012] Mean detx,y = (6980.17, -583.61) 
[Sat Jul 14 14:44:15 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 14:44:29 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 14:44:29 2012] Setting source spectrum file to fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src77_src_b10.pi.gz
[Sat Jul 14 14:44:29 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src77_bgd.pi.gz
[Sat Jul 14 17:57:02 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul 14 17:57:02 2012] rmf not generated due to insufficient counts
[Sat Jul 14 20:24:53 2012] Updating aperture counts using extracted products
[Sat Jul 14 20:24:53 2012] Error reading totcts from fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src77_src_b10.pi.gz
[Sat Jul 14 20:24:57 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 20:24:57 2012] Using photon index=1.80, rate=0.0396, arf fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src77.arf
[Sat Jul 14 20:24:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 20:24:58 2012] Updating source flux to 6.5e-13
[Sat Jul 14 20:34:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting