[Thu Jul 12 01:49:01 2012] Detection parameters:
  Position = (246.9, 345.9) = 15 3 58.77 -41 46 10.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 614.8 +/- 38.6
  Background counts = 166.3
  Rate = 0.03 +/- 0.002

[Thu Jul 12 01:49:04 2012] Off-axis axis estimate = 5.08'
[Thu Jul 12 12:56:10 2012] Using EEF radius (= 8.97 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 12:56:10 2012] Initial guess for spatial extent in simple fitting = 8.97"
[Thu Jul 12 12:56:10 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.952
[Thu Jul 12 12:56:10 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 8.97"
[Thu Jul 12 22:33:20 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src43.ximg exists
[Thu Jul 12 22:33:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src43.csv
[Thu Jul 12 22:33:20 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src43_1.ximg exists
[Thu Jul 12 22:33:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src43.csv
[Thu Jul 12 22:33:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 22:33:23 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Thu Jul 12 22:33:23 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Thu Jul 12 22:33:23 2012] Fit fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Thu Jul 12 22:34:37 2012] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 58 at 10.499533 pixels away
[Thu Jul 12 22:34:38 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 22:34:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 22:34:38 2012] Assessing source extent using major
[Thu Jul 12 22:34:38 2012] Source does appear to be extended
[Thu Jul 12 22:34:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 22:34:38 2012] Source is confused with source 65
[Fri Jul 13 12:50:38 2012] Using EEF radius (= 8.97 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 12:50:38 2012] Initial guess for spatial extent in simple fitting = 8.97"
[Fri Jul 13 12:50:38 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.952
[Fri Jul 13 12:50:38 2012] Giving source the simple spatial ID 42 for pass 1, mean size = 8.97"
[Fri Jul 13 22:14:09 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src42.ximg exists
[Fri Jul 13 22:14:09 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src42_1.ximg exists
[Fri Jul 13 22:14:09 2012] Fit fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src42 appears to have run properly
[Fri Jul 13 22:14:12 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Fri Jul 13 22:14:12 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Fri Jul 13 22:14:12 2012] Fit fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src42 appears to have run properly
[Fri Jul 13 22:15:27 2012] Spatial fit model total counts = 10130.500000, observed total counts = 10599.000000
[Fri Jul 13 22:15:27 2012] Offset between fit and detection position for source 58 = 1.764884 pixels
[Fri Jul 13 22:15:27 2012] Warning, changing simple spatial fit ID from 42 to 28
[Fri Jul 13 22:15:27 2012] 10541.740000 total counts/ 3961.950000 bgd. counts: snr = 104.533992
Spatial fit parameters:
  Offset between fit and detection position for source 58 = 1.764884 pixels
  Position = (248.4, 346.9) = 15 3 58.20 -41 46 6.4
  Extent = 35.3 (35.1-70.7)" x 35.3 (35.3-70.7)", rotation angle = 358 (354-0) degrees
  Source counts = 6579.8 +/- 102.7
  Background counts = 3961.9
  Rate = 0.2 +/- 0.004
[Fri Jul 13 22:15:27 2012] Spatial fit model total counts = 4095.570000, observed total counts = 4074.000000
[Fri Jul 13 22:15:27 2012] Offset between fit and detection position for source 58 = 1.420638 pixels
[Fri Jul 13 22:15:27 2012] Warning, changing simple spatial fit ID from 28 to 31
[Fri Jul 13 22:15:27 2012] 4213.470000 total counts/ 3821.860000 bgd. counts: snr = 6.334559
Spatial fit parameters:
  Offset between fit and detection position for source 58 = 1.420638 pixels
  Position = (247.2, 347.7) = 15 3 58.66 -41 46 3.0
  Extent = 10.9 (8.0-14.5)", rotation angle = 0
  Source counts = 391.6 +/- 64.9
  Background counts = 3821.9
  Rate = 0.01 +/- 0.002
[Fri Jul 13 22:15:28 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 22:15:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 22:15:28 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 22:15:28 2012] Source does appear to be extended
[Fri Jul 13 22:15:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 13:10:53 2012] XMMSAS src. selection expression = ellipse(21460.705200, 30198.632000, 655.524019, 655.524019, 0.000000, X, Y)
[Sat Jul 14 13:10:53 2012] Writing source region out to fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src58_src.reg
[Sat Jul 14 13:10:53 2012] Extracting stamp from image fullrun_mos2_xmm0143980201_pi300-10000_cl_sm2.00.img.gz, (210, 310) - (285, 385)
[Sat Jul 14 13:10:53 2012] XMMSAS bgd. selection expression = annulus(21460.705200, 30198.632000, 1092.540031, 2185.080063, X, Y) && !ellipse(21032.230000, 28264.298800, 855.200025, 855.200025, 0.000000, X, Y) && !ellipse(21137.040000, 27031.928000, 1070.720031, 1070.720031, 0.000000, X, Y) && !ellipse(21397.042000, 29220.108000, 1397.112040, 1397.112040, 0.000000, X, Y) && !ellipse(22362.247230, 28533.617002, 1636.752047, 641.286152, 128.799767, X, Y) && !ellipse(23901.515680, 32827.016000, 1167.016034, 1167.016034, 0.000000, X, Y) && !ellipse(20746.985400, 27803.760000, 1393.776040, 660.624019, 303.105000, X, Y) && !ellipse(21536.638200, 29682.106000, 1407.104040, 1407.104040, 0.000000, X, Y) && !ellipse(23145.586000, 29456.214000, 971.384028, 971.384028, 0.000000, X, Y) && !ellipse(22009.340400, 30849.132000, 1413.192041, 1413.192041, 0.000000, X, Y) && !ellipse(20189.698000, 26998.558000, 1393.776040, 1393.776040, 0.000000, X, Y) && !ellipse(21593.090000, 30594.319400, 644.281619, 644.281619, 0.000000, X, Y) && !ellipse(22657.408000, 28815.982000, 2252.704065, 2252.704065, 0.000000, X, Y) && !ellipse(24232.748000, 30193.582000, 2798.400081, 2798.400081, 0.000000, X, Y) && !ellipse(23653.748000, 30030.056000, 1347.648039, 1347.648039, 0.000000, X, Y) && !ellipse(22687.791800, 30412.322800, 540.142416, 540.142416, 0.000000, X, Y) && !ellipse(22177.293198, 30309.866974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22148.180801, 31520.666534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23368.682200, 31400.076200, 607.116017, 607.116017, 0.000000, X, Y) && !ellipse(23088.720947, 32140.876068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24524.350000, 30766.774000, 1098.072032, 1098.072032, 0.000000, X, Y) && !ellipse(23313.366000, 29732.068000, 2013.056058, 2013.056058, 0.000000, X, Y) && !ellipse(23134.721985, 32917.145569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25943.826000, 31900.568000, 2730.464079, 2730.464079, 0.000000, X, Y) && !ellipse(22587.844000, 32705.646000, 1518.472044, 1518.472044, 0.000000, X, Y) && !ellipse(23997.094086, 31286.118591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23921.020000, 32114.982000, 1326.616038, 1326.616038, 0.000000, X, Y) && !ellipse(23512.758331, 28765.221375, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 14 13:10:53 2012] Writing fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src58.gif
[Sat Jul 14 15:16:28 2012] Mean detx,y = (4215.09, 3615.53) 
[Sat Jul 14 15:16:29 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 15:16:39 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 15:16:39 2012] Setting source spectrum file to fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Sat Jul 14 15:16:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src58_bgd.pi.gz
[Sat Jul 14 20:24:54 2012] Updating aperture counts using extracted products
[Sat Jul 14 20:24:54 2012] Error reading totcts from fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Sat Jul 14 20:24:58 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 20:24:58 2012] Using photon index=1.80, rate=0.0149, arf fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src58.arf
[Sat Jul 14 20:24:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 20:24:58 2012] Updating source flux to 2.1e-13
[Sat Jul 14 20:34:35 2012] Flag c found in src. 58 procflags, skipping spectral fitting