[Thu Jul 12 01:49:01 2012] Detection parameters:
  Position = (265.9, 370.0) = 15 3 51.38 -41 44 24.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 626.3 +/- 37.2
  Background counts = 161.9
  Rate = 0.03 +/- 0.002

[Thu Jul 12 01:49:04 2012] Off-axis axis estimate = 5.70'
[Thu Jul 12 12:56:10 2012] Using EEF radius (= 9.28 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 12:56:10 2012] Initial guess for spatial extent in simple fitting = 9.28"
[Thu Jul 12 12:56:10 2012] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.298
[Thu Jul 12 12:56:10 2012] Giving source the simple spatial ID 41 for pass 0, mean size = 9.28"
[Thu Jul 12 22:33:20 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src41.ximg exists
[Thu Jul 12 22:33:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src41.csv
[Thu Jul 12 22:33:20 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src41_1.ximg exists
[Thu Jul 12 22:33:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src41.csv
[Thu Jul 12 22:33:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 22:33:23 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Thu Jul 12 22:33:23 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Thu Jul 12 22:33:23 2012] Fit fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Thu Jul 12 22:34:37 2012] Source 43 is offset by -1.326288 and -2.278528 pixels which is larger than
2 X fitted extent = 1.091080 x 1.091080, not incorporating fit results
[Thu Jul 12 22:34:37 2012] Warning, spatial fit 41 centroid is now closest to src. 40
[Thu Jul 12 22:34:38 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 22:34:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 22:34:38 2012] Assessing source extent using major
[Thu Jul 12 22:34:38 2012] Source does appear to be extended
[Thu Jul 12 22:34:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 22:34:38 2012] Source is confused with source 38
[Thu Jul 12 22:34:38 2012] Source is confused with source 44
[Fri Jul 13 12:50:38 2012] Using EEF radius (= 9.28 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 12:50:38 2012] Initial guess for spatial extent in simple fitting = 9.28"
[Fri Jul 13 12:50:38 2012] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.298
[Fri Jul 13 12:50:38 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 9.28"
[Fri Jul 13 22:14:09 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src40.ximg exists
[Fri Jul 13 22:14:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src40.csv
[Fri Jul 13 22:14:09 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src40_1.ximg exists
[Fri Jul 13 22:14:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src40.csv
[Fri Jul 13 22:14:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 22:14:12 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Fri Jul 13 22:14:12 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Fri Jul 13 22:14:12 2012] Fit fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src40 appears to have run properly
[Fri Jul 13 22:15:27 2012] Warning, spatial fit 40 centroid is now closest to src. 40
[Fri Jul 13 22:15:28 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 22:15:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 22:15:28 2012] Assessing source extent using major
[Fri Jul 13 22:15:28 2012] Source does appear to be extended
[Fri Jul 13 22:15:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 13:10:52 2012] XMMSAS src. selection expression = ellipse(23088.720947, 32140.876068, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 14 13:10:52 2012] Writing source region out to fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src43_src.reg
[Sat Jul 14 13:10:52 2012] Extracting stamp from image fullrun_mos2_xmm0143980201_pi300-10000_cl_sm2.00.img.gz, (228, 332) - (303, 407)
[Sat Jul 14 13:10:52 2012] XMMSAS bgd. selection expression = annulus(23088.720947, 32140.876068, 1087.500000, 2175.000000, X, Y) && !ellipse(26000.754425, 34838.452209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21397.042000, 29220.108000, 1397.112040, 1397.112040, 0.000000, X, Y) && !ellipse(25023.127502, 33684.101227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22362.247230, 28533.617002, 1636.752047, 641.286152, 128.799767, X, Y) && !ellipse(24478.012817, 33406.948029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23901.515680, 32827.016000, 1167.016034, 1167.016034, 0.000000, X, Y) && !ellipse(26124.228000, 34288.308000, 2190.424063, 833.672024, 187.562000, X, Y) && !ellipse(21536.638200, 29682.106000, 1407.104040, 1407.104040, 0.000000, X, Y) && !ellipse(23145.586000, 29456.214000, 971.384028, 971.384028, 0.000000, X, Y) && !ellipse(25272.402000, 31335.648000, 1365.232039, 1365.232039, 0.000000, X, Y) && !ellipse(22009.340400, 30849.132000, 1413.192041, 1413.192041, 0.000000, X, Y) && !ellipse(21593.090000, 30594.319400, 644.281619, 644.281619, 0.000000, X, Y) && !ellipse(24738.351715, 32752.677124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22657.408000, 28815.982000, 2252.704065, 2252.704065, 0.000000, X, Y) && !ellipse(24232.748000, 30193.582000, 2798.400081, 2798.400081, 0.000000, X, Y) && !ellipse(23653.748000, 30030.056000, 1347.648039, 1347.648039, 0.000000, X, Y) && !ellipse(22687.791800, 30412.322800, 540.142416, 540.142416, 0.000000, X, Y) && !ellipse(22177.293198, 30309.866974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22148.180801, 31520.666534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23368.682200, 31400.076200, 607.116017, 607.116017, 0.000000, X, Y) && !ellipse(24524.350000, 30766.774000, 1098.072032, 1098.072032, 0.000000, X, Y) && !ellipse(21460.705200, 30198.632000, 874.032025, 874.032025, 0.000000, X, Y) && !ellipse(23313.366000, 29732.068000, 2013.056058, 2013.056058, 0.000000, X, Y) && !ellipse(24465.159821, 34219.325928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23134.721985, 32917.145569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25943.826000, 31900.568000, 2730.464079, 2730.464079, 0.000000, X, Y) && !ellipse(25359.950000, 32596.091200, 1491.088043, 1491.088043, 0.000000, X, Y) && !ellipse(22587.844000, 32705.646000, 1518.472044, 1518.472044, 0.000000, X, Y) && !ellipse(23997.094086, 31286.118591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23921.020000, 32114.982000, 1326.616038, 1326.616038, 0.000000, X, Y) && !ellipse(24960.232513, 34399.488251, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 14 13:10:52 2012] Writing fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src43.gif
[Sat Jul 14 15:15:51 2012] Mean detx,y = (2238.91, 5102.72) 
[Sat Jul 14 15:15:52 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 15:16:01 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 15:16:01 2012] Setting source spectrum file to fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sat Jul 14 15:16:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Sat Jul 14 18:35:21 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul 14 18:35:21 2012] rmf not generated due to insufficient counts
[Sat Jul 14 20:24:54 2012] Updating aperture counts using extracted products
[Sat Jul 14 20:24:54 2012] Error reading totcts from fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sat Jul 14 20:24:58 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 20:24:58 2012] Using photon index=1.80, rate=0.0275, arf fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src43.arf
[Sat Jul 14 20:24:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 20:24:58 2012] Updating source flux to 3.9e-13
[Sat Jul 14 20:34:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting