[Thu Jul 12 01:49:01 2012] Detection parameters:
  Position = (291.4, 378.0) = 15 3 41.47 -41 43 51.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 502.6 +/- 35.6
  Background counts = 195.0
  Rate = 0.02 +/- 0.002

[Thu Jul 12 01:49:04 2012] Off-axis axis estimate = 5.79'
[Thu Jul 12 12:56:10 2012] Using EEF radius (= 9.32 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 12:56:10 2012] Initial guess for spatial extent in simple fitting = 9.32"
[Thu Jul 12 12:56:10 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.073
[Thu Jul 12 12:56:10 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 9.32"
[Thu Jul 12 22:33:20 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src55.ximg exists
[Thu Jul 12 22:33:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src55.csv
[Thu Jul 12 22:33:20 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src55_1.ximg exists
[Thu Jul 12 22:33:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src55.csv
[Thu Jul 12 22:33:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 22:33:24 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Thu Jul 12 22:33:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src55.csv
[Thu Jul 12 22:33:24 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Thu Jul 12 22:33:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src55.csv
[Thu Jul 12 22:33:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 22:34:37 2012] Source 33 is offset by -7.405369 and -1.999036 pixels which is larger than
2 X fitted extent = 1.076115 x 1.076115, not incorporating fit results
[Thu Jul 12 22:34:38 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 22:34:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 22:34:38 2012] Assessing source extent using major
[Thu Jul 12 22:34:38 2012] Source does appear to be extended
[Thu Jul 12 22:34:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 22:34:38 2012] Source is confused with source 41
[Fri Jul 13 12:50:38 2012] Using EEF radius (= 9.32 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 12:50:38 2012] Initial guess for spatial extent in simple fitting = 9.32"
[Fri Jul 13 12:50:38 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.073
[Fri Jul 13 12:50:38 2012] Giving source the simple spatial ID 52 for pass 1, mean size = 9.32"
[Fri Jul 13 22:14:09 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src52.ximg exists
[Fri Jul 13 22:14:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src52.csv
[Fri Jul 13 22:14:09 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src52_1.ximg exists
[Fri Jul 13 22:14:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src52.csv
[Fri Jul 13 22:14:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 22:14:12 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Fri Jul 13 22:14:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src52.csv
[Fri Jul 13 22:14:12 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Fri Jul 13 22:14:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src52.csv
[Fri Jul 13 22:14:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 22:15:27 2012] Spatial fit model total counts = 5953.690000, observed total counts = 5947.000000
[Fri Jul 13 22:15:27 2012] Offset between fit and detection position for source 33 = 2.832851 pixels
[Fri Jul 13 22:15:27 2012] Warning, changing simple spatial fit ID from 52 to 32
[Fri Jul 13 22:15:27 2012] 5669.473000 total counts/ 5047.480000 bgd. counts: snr = 8.754840
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 2.832851 pixels
  Position = (292.1, 375.2) = 15 3 41.23 -41 44 3.3
  Extent = 18.6 (18.5-37.3)", rotation angle = 0
  Source counts = 622.0 +/- 75.3
  Background counts = 5047.5
  Rate = 0.02 +/- 0.003
[Fri Jul 13 22:15:28 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 22:15:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 22:15:28 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 22:15:28 2012] Source does appear to be extended
[Fri Jul 13 22:15:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 13:10:55 2012] XMMSAS src. selection expression = ellipse(25359.950000, 32596.091200, 1118.316032, 1118.316032, 0.000000, X, Y)
[Sat Jul 14 13:10:55 2012] Writing source region out to fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src33_src.reg
[Sat Jul 14 13:10:55 2012] Extracting stamp from image fullrun_mos2_xmm0143980201_pi300-10000_cl_sm2.00.img.gz, (228, 311) - (356, 439)
[Sat Jul 14 13:10:55 2012] XMMSAS bgd. selection expression = annulus(25359.950000, 32596.091200, 1863.860054, 3727.720107, X, Y) && !ellipse(26416.723175, 34921.506836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21032.230000, 28264.298800, 855.200025, 855.200025, 0.000000, X, Y) && !ellipse(26000.754425, 34838.452209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21397.042000, 29220.108000, 1397.112040, 1397.112040, 0.000000, X, Y) && !ellipse(25023.127502, 33684.101227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22362.247230, 28533.617002, 1636.752047, 641.286152, 128.799767, X, Y) && !ellipse(24478.012817, 33406.948029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23901.515680, 32827.016000, 1167.016034, 1167.016034, 0.000000, X, Y) && !ellipse(26124.228000, 34288.308000, 2190.424063, 833.672024, 187.562000, X, Y) && !ellipse(20746.985400, 27803.760000, 1393.776040, 660.624019, 303.105000, X, Y) && !ellipse(21536.638200, 29682.106000, 1407.104040, 1407.104040, 0.000000, X, Y) && !ellipse(23145.586000, 29456.214000, 971.384028, 971.384028, 0.000000, X, Y) && !ellipse(25272.402000, 31335.648000, 1365.232039, 1365.232039, 0.000000, X, Y) && !ellipse(22009.340400, 30849.132000, 1413.192041, 1413.192041, 0.000000, X, Y) && !ellipse(26916.786000, 34069.878000, 1537.184044, 1537.184044, 0.000000, X, Y) && !ellipse(21593.090000, 30594.319400, 644.281619, 644.281619, 0.000000, X, Y) && !ellipse(24738.351715, 32752.677124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22657.408000, 28815.982000, 2252.704065, 2252.704065, 0.000000, X, Y) && !ellipse(24232.748000, 30193.582000, 2798.400081, 2798.400081, 0.000000, X, Y) && !ellipse(23653.748000, 30030.056000, 1347.648039, 1347.648039, 0.000000, X, Y) && !ellipse(22687.791800, 30412.322800, 540.142416, 540.142416, 0.000000, X, Y) && !ellipse(22177.293198, 30309.866974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22148.180801, 31520.666534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23368.682200, 31400.076200, 607.116017, 607.116017, 0.000000, X, Y) && !ellipse(23088.720947, 32140.876068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24524.350000, 30766.774000, 1098.072032, 1098.072032, 0.000000, X, Y) && !ellipse(21460.705200, 30198.632000, 874.032025, 874.032025, 0.000000, X, Y) && !ellipse(27658.086000, 34757.644000, 890.816026, 890.816026, 0.000000, X, Y) && !ellipse(23313.366000, 29732.068000, 2013.056058, 2013.056058, 0.000000, X, Y) && !ellipse(24465.159821, 34219.325928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29108.306915, 34915.471954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23134.721985, 32917.145569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25943.826000, 31900.568000, 2730.464079, 2730.464079, 0.000000, X, Y) && !ellipse(22587.844000, 32705.646000, 1518.472044, 1518.472044, 0.000000, X, Y) && !ellipse(23997.094086, 31286.118591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23921.020000, 32114.982000, 1326.616038, 1326.616038, 0.000000, X, Y) && !ellipse(28174.379120, 34616.648407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30836.632000, 34617.090000, 2470.872071, 2470.872071, 0.000000, X, Y) && !ellipse(27545.070801, 33368.667816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28627.386000, 33307.082000, 1543.968044, 331.083210, 298.848000, X, Y) && !ellipse(24960.232513, 34399.488251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28339.468842, 35600.458893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29767.502899, 35796.328369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28061.168671, 33877.177612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28737.991394, 35680.375275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29260.270172, 35787.213654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26769.528000, 31985.360000, 1462.216042, 1462.216042, 0.000000, X, Y) && !ellipse(23512.758331, 28765.221375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28927.572000, 33537.872000, 1603.416046, 1603.416046, 0.000000, X, Y) && !ellipse(29198.126556, 32914.981720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28031.830597, 30580.249847, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 14 13:10:55 2012] Writing fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src33.gif
[Sat Jul 14 15:41:59 2012] Mean detx,y = (-40.65, 4912.11) 
[Sat Jul 14 15:42:01 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 15:42:19 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 15:42:19 2012] Setting source spectrum file to fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sat Jul 14 15:42:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Sat Jul 14 20:24:54 2012] Updating aperture counts using extracted products
[Sat Jul 14 20:24:54 2012] Error reading totcts from fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sat Jul 14 20:24:58 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 20:24:58 2012] Using photon index=1.80, rate=0.0236, arf fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src33.arf
[Sat Jul 14 20:24:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 20:24:58 2012] Updating source flux to 3e-13
[Sat Jul 14 20:34:35 2012] Flag b found in src. 33 procflags, skipping spectral fitting
[Sat Jul 14 20:34:35 2012] Flag c found in src. 33 procflags, skipping spectral fitting