[Thu Jul 12 01:49:00 2012] Detection parameters:
  Position = (319.1, 397.4) = 15 3 30.73 -41 42 23.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 521.5 +/- 32.7
  Background counts = 182.6
  Rate = 0.03 +/- 0.002

[Thu Jul 12 01:49:04 2012] Off-axis axis estimate = 7.33'
[Thu Jul 12 12:56:10 2012] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 12:56:10 2012] Initial guess for spatial extent in simple fitting = 10.09"
[Thu Jul 12 12:56:10 2012] source mask rpix=2.3, npix_max = 31, mask sum = 29, frac = 0.912
[Thu Jul 12 12:56:10 2012] Giving source the simple spatial ID 44 for pass 0, mean size = 10.09"
[Thu Jul 12 22:33:20 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src44.ximg exists
[Thu Jul 12 22:33:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src44.csv
[Thu Jul 12 22:33:20 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src44_1.ximg exists
[Thu Jul 12 22:33:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src44.csv
[Thu Jul 12 22:33:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 22:33:23 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Thu Jul 12 22:33:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src44.csv
[Thu Jul 12 22:33:23 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Thu Jul 12 22:33:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src44.csv
[Thu Jul 12 22:33:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 22:34:37 2012] Warning, spatial fit 44 centroid is now closest to src. 18
[Thu Jul 12 22:34:38 2012] Spatial fit model total counts = 3899.310000, observed total counts = 3882.000000
[Thu Jul 12 22:34:38 2012] Offset between fit and detection position for source 22 = 2.750642 pixels
[Thu Jul 12 22:34:38 2012] Warning, changing simple spatial fit ID from 44 to 85
[Thu Jul 12 22:34:38 2012] 3771.691000 total counts/ 3602.550000 bgd. counts: snr = 2.818019
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 2.750642 pixels
  Position = (318.5, 400.1) = 15 3 30.97 -41 42 15.2
  Extent = 10.7 (6.1-14.8)", rotation angle = 0
  Source counts = 169.1 +/- 61.4
  Background counts = 3602.6
  Rate = 0.006 +/- 0.002
[Thu Jul 12 22:34:38 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 22:34:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 22:34:38 2012] Assessing source extent using major axis lower bound
[Thu Jul 12 22:34:38 2012] Source does appear to be extended
[Thu Jul 12 22:34:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 22:34:38 2012] Source is confused with source 23
[Thu Jul 12 22:34:38 2012] Source is confused with source 18
[Fri Jul 13 12:50:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 13 12:50:38 2012] Initial guess for spatial extent in simple fitting = 10.68"
[Fri Jul 13 12:50:38 2012] source mask rpix=2.5, npix_max = 34, mask sum = 17, frac = 0.487
[Fri Jul 13 12:50:38 2012] Skipping simple spatial due to low active detector fraction
[Fri Jul 13 22:15:28 2012] Source 22 is offset by -1.347195 and -6.322483 pixels which is larger than
2 X fitted extent = 4.274690 x 4.274690, not incorporating fit results
[Fri Jul 13 22:15:28 2012] Spatial fit model total counts = 3897.440000, observed total counts = 3882.000000
[Fri Jul 13 22:15:28 2012] Offset between fit and detection position for source 22 = 0.005011 pixels
[Fri Jul 13 22:15:28 2012] Warning, changing simple spatial fit ID from -1 to 80
[Fri Jul 13 22:15:28 2012] 3738.328000 total counts/ 3548.250000 bgd. counts: snr = 3.190985
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.005011 pixels
  Position = (318.5, 400.1) = 15 3 30.97 -41 42 15.2
  Extent = 11.1 (6.2-15.6)", rotation angle = 0
  Source counts = 190.1 +/- 61.1
  Background counts = 3548.2
  Rate = 0.007 +/- 0.002
[Fri Jul 13 22:15:28 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 22:15:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 22:15:28 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 22:15:28 2012] Source does appear to be extended
[Fri Jul 13 22:15:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 13:10:53 2012] XMMSAS src. selection expression = ellipse(27658.086000, 34757.644000, 668.112019, 668.112019, 0.000000, X, Y)
[Sat Jul 14 13:10:53 2012] Writing source region out to fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src22_src.reg
[Sat Jul 14 13:10:53 2012] Extracting stamp from image fullrun_mos2_xmm0143980201_pi300-10000_cl_sm2.00.img.gz, (280, 362) - (357, 438)
[Sat Jul 14 13:10:53 2012] XMMSAS bgd. selection expression = annulus(27658.086000, 34757.644000, 1113.520032, 2227.040064, X, Y) && !ellipse(26416.723175, 34921.506836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26000.754425, 34838.452209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25023.127502, 33684.101227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26124.228000, 34288.308000, 2190.424063, 833.672024, 187.562000, X, Y) && !ellipse(25272.402000, 31335.648000, 1365.232039, 1365.232039, 0.000000, X, Y) && !ellipse(26916.786000, 34069.878000, 1537.184044, 1537.184044, 0.000000, X, Y) && !ellipse(24738.351715, 32752.677124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24232.748000, 30193.582000, 2798.400081, 2798.400081, 0.000000, X, Y) && !ellipse(29108.306915, 34915.471954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25943.826000, 31900.568000, 2730.464079, 2730.464079, 0.000000, X, Y) && !ellipse(30336.759766, 35097.930878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25359.950000, 32596.091200, 1491.088043, 1491.088043, 0.000000, X, Y) && !ellipse(31153.774000, 34206.640600, 1680.776048, 1680.776048, 0.000000, X, Y) && !ellipse(28174.379120, 34616.648407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30836.632000, 34617.090000, 2470.872071, 2470.872071, 0.000000, X, Y) && !ellipse(27545.070801, 33368.667816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28627.386000, 33307.082000, 1543.968044, 331.083210, 298.848000, X, Y) && !ellipse(24960.232513, 34399.488251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28339.468842, 35600.458893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29767.502899, 35796.328369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28061.168671, 33877.177612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28737.991394, 35680.375275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29260.270172, 35787.213654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26769.528000, 31985.360000, 1462.216042, 1462.216042, 0.000000, X, Y) && !ellipse(28927.572000, 33537.872000, 1603.416046, 1603.416046, 0.000000, X, Y) && !ellipse(29198.126556, 32914.981720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30527.228912, 35884.148773, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 14 13:10:53 2012] Writing fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src22.gif
[Sat Jul 14 15:16:46 2012] Mean detx,y = (-2847.40, 6387.16) 
[Sat Jul 14 15:16:47 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 15:17:05 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 15:17:05 2012] Setting source spectrum file to fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Sat Jul 14 15:17:05 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Sat Jul 14 20:24:54 2012] Updating aperture counts using extracted products
[Sat Jul 14 20:24:54 2012] Error reading totcts from fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Sat Jul 14 20:24:58 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 20:24:58 2012] Using photon index=1.80, rate=0.00722, arf fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src22.arf
[Sat Jul 14 20:24:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 20:24:58 2012] Updating source flux to 6e-13
[Sat Jul 14 20:34:35 2012] Flag b found in src. 22 procflags, skipping spectral fitting
[Sat Jul 14 20:34:35 2012] Flag c found in src. 22 procflags, skipping spectral fitting