[Thu Jul 12 01:49:00 2012] Detection parameters:
  Position = (281.8, 393.9) = 15 3 45.22 -41 42 50.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 377.4 +/- 28.2
  Background counts = 113.4
  Rate = 0.02 +/- 0.002

[Thu Jul 12 01:49:04 2012] Off-axis axis estimate = 7.02'
[Thu Jul 12 12:56:10 2012] Using EEF radius (= 9.94 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 12:56:10 2012] Initial guess for spatial extent in simple fitting = 9.94"
[Thu Jul 12 12:56:10 2012] source mask rpix=2.3, npix_max = 31, mask sum = 24, frac = 0.773
[Thu Jul 12 12:56:10 2012] Giving source the simple spatial ID 48 for pass 0, mean size = 9.94"
[Thu Jul 12 22:33:20 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src48.ximg exists
[Thu Jul 12 22:33:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src48.csv
[Thu Jul 12 22:33:20 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src48_1.ximg exists
[Thu Jul 12 22:33:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src48.csv
[Thu Jul 12 22:33:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 22:33:23 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Thu Jul 12 22:33:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src48.csv
[Thu Jul 12 22:33:23 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Thu Jul 12 22:33:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src48.csv
[Thu Jul 12 22:33:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 22:34:37 2012] Warning, spatial fit 48 centroid is now closest to src. 19
[Thu Jul 12 22:34:38 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 22:34:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 22:34:38 2012] Assessing source extent using major
[Thu Jul 12 22:34:38 2012] Source does appear to be extended
[Thu Jul 12 22:34:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 22:34:38 2012] Source is confused with source 19
[Fri Jul 13 12:50:38 2012] Using EEF radius (= 9.94 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 12:50:38 2012] Initial guess for spatial extent in simple fitting = 9.94"
[Fri Jul 13 12:50:38 2012] source mask rpix=2.3, npix_max = 31, mask sum = 24, frac = 0.773
[Fri Jul 13 12:50:38 2012] Giving source the simple spatial ID 45 for pass 1, mean size = 9.94"
[Fri Jul 13 22:14:09 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src45.ximg exists
[Fri Jul 13 22:14:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src45.csv
[Fri Jul 13 22:14:09 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src45_1.ximg exists
[Fri Jul 13 22:14:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src45.csv
[Fri Jul 13 22:14:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 22:14:12 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Fri Jul 13 22:14:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src45.csv
[Fri Jul 13 22:14:12 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Fri Jul 13 22:14:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src45.csv
[Fri Jul 13 22:14:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 22:15:28 2012] Warning, spatial fit 45 centroid is now closest to src. 19
[Fri Jul 13 22:15:28 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 22:15:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 22:15:28 2012] Assessing source extent using major
[Fri Jul 13 22:15:28 2012] Source does appear to be extended
[Fri Jul 13 22:15:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 13:10:53 2012] XMMSAS src. selection expression = ellipse(24465.159821, 34219.325928, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 14 13:10:54 2012] Writing source region out to fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src21_src.reg
[Sat Jul 14 13:10:54 2012] Extracting stamp from image fullrun_mos2_xmm0143980201_pi300-10000_cl_sm2.00.img.gz, (244, 356) - (319, 431)
[Sat Jul 14 13:10:54 2012] XMMSAS bgd. selection expression = annulus(24465.159821, 34219.325928, 1087.500000, 2175.000000, X, Y) && !ellipse(26416.723175, 34921.506836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26000.754425, 34838.452209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25023.127502, 33684.101227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24478.012817, 33406.948029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23901.515680, 32827.016000, 1167.016034, 1167.016034, 0.000000, X, Y) && !ellipse(26124.228000, 34288.308000, 2190.424063, 833.672024, 187.562000, X, Y) && !ellipse(25272.402000, 31335.648000, 1365.232039, 1365.232039, 0.000000, X, Y) && !ellipse(22009.340400, 30849.132000, 1413.192041, 1413.192041, 0.000000, X, Y) && !ellipse(26916.786000, 34069.878000, 1537.184044, 1537.184044, 0.000000, X, Y) && !ellipse(24738.351715, 32752.677124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24232.748000, 30193.582000, 2798.400081, 2798.400081, 0.000000, X, Y) && !ellipse(22148.180801, 31520.666534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23088.720947, 32140.876068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23134.721985, 32917.145569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25943.826000, 31900.568000, 2730.464079, 2730.464079, 0.000000, X, Y) && !ellipse(25359.950000, 32596.091200, 1491.088043, 1491.088043, 0.000000, X, Y) && !ellipse(22587.844000, 32705.646000, 1518.472044, 1518.472044, 0.000000, X, Y) && !ellipse(23997.094086, 31286.118591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23921.020000, 32114.982000, 1326.616038, 1326.616038, 0.000000, X, Y) && !ellipse(24960.232513, 34399.488251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26769.528000, 31985.360000, 1462.216042, 1462.216042, 0.000000, X, Y)
[Sat Jul 14 13:10:54 2012] Writing fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src21.gif
[Sat Jul 14 15:27:45 2012] Mean detx,y = (312.75, 6584.18) 
[Sat Jul 14 15:27:48 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 15:28:15 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 15:28:15 2012] Setting source spectrum file to fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sat Jul 14 15:28:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Sat Jul 14 18:51:40 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul 14 18:51:40 2012] rmf not generated due to insufficient counts
[Sat Jul 14 20:24:54 2012] Updating aperture counts using extracted products
[Sat Jul 14 20:24:54 2012] Error reading totcts from fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sat Jul 14 20:24:58 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 20:24:58 2012] Using photon index=1.80, rate=0.0245, arf fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src21.arf
[Sat Jul 14 20:24:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 20:24:58 2012] Updating source flux to 5.9e-13
[Sat Jul 14 20:34:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting