[Thu Jul 12 01:49:02 2012] Detection parameters:
  Position = (372.8, 398.0) = 15 3 9.85 -41 42 23.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 204.1 +/- 25.4
  Background counts = 141.7
  Rate = 0.01 +/- 0.001

[Thu Jul 12 01:49:05 2012] Off-axis axis estimate = 9.01'
[Thu Jul 12 12:56:10 2012] Using EEF radius (= 10.93 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 12:56:10 2012] Initial guess for spatial extent in simple fitting = 10.93"
[Thu Jul 12 12:56:10 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.991
[Thu Jul 12 12:56:10 2012] Giving source the simple spatial ID 93 for pass 0, mean size = 10.93"
[Thu Jul 12 22:33:21 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src93.ximg exists
[Thu Jul 12 22:33:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src93.csv
[Thu Jul 12 22:33:21 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src93_1.ximg exists
[Thu Jul 12 22:33:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src93.csv
[Thu Jul 12 22:33:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src93_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 22:33:25 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src93.ximg exists
[Thu Jul 12 22:33:25 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src93_1.ximg exists
[Thu Jul 12 22:33:25 2012] Fit fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src93 appears to have run properly
[Thu Jul 12 22:34:37 2012] Source 125 is offset by 2.527645 and -7.289280 pixels which is larger than
2 X fitted extent = 1.337738 x 1.337738, not incorporating fit results
[Thu Jul 12 22:34:38 2012] Source 125 is offset by 5.019898 and -1.185395 pixels which is larger than
2 X fitted extent = 1.225729 x 1.225729, not incorporating fit results
[Thu Jul 12 22:34:38 2012] Warning, spatial fit 93 centroid is now closest to src. 120
[Thu Jul 12 22:34:38 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 22:34:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 22:34:38 2012] Assessing source extent using major
[Thu Jul 12 22:34:38 2012] Source does appear to be extended
[Thu Jul 12 22:34:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 22:34:38 2012] Source is confused with source 25
[Fri Jul 13 12:50:38 2012] Using EEF radius (= 10.93 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 12:50:38 2012] Initial guess for spatial extent in simple fitting = 10.93"
[Fri Jul 13 12:50:38 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.991
[Fri Jul 13 12:50:38 2012] Giving source the simple spatial ID 86 for pass 1, mean size = 10.93"
[Fri Jul 13 22:14:10 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src86.ximg exists
[Fri Jul 13 22:14:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src86.csv
[Fri Jul 13 22:14:10 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src86_1.ximg exists
[Fri Jul 13 22:14:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src86.csv
[Fri Jul 13 22:14:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src86_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 22:14:13 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src86.ximg exists
[Fri Jul 13 22:14:13 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src86_1.ximg exists
[Fri Jul 13 22:14:13 2012] Fit fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src86 appears to have run properly
[Fri Jul 13 22:15:28 2012] Warning, spatial fit 86 centroid is now closest to src. 120
[Fri Jul 13 22:15:28 2012] Spatial fit model total counts = 1893.420000, observed total counts = 1865.000000
[Fri Jul 13 22:15:28 2012] Offset between fit and detection position for source 125 = 6.561741 pixels
[Fri Jul 13 22:15:28 2012] Warning, changing simple spatial fit ID from 86 to 97
[Fri Jul 13 22:15:28 2012] 1942.251000 total counts/ 1813.220000 bgd. counts: snr = 3.030183
Spatial fit parameters:
  Offset between fit and detection position for source 125 = 6.561741 pixels
  Position = (379.2, 399.5) = 15 3 7.37 -41 42 17.5
  Extent = 15.7 (10.2-22.4)", rotation angle = 0
  Source counts = 129.0 +/- 44.1
  Background counts = 1813.2
  Rate = 0.005 +/- 0.002
[Fri Jul 13 22:15:28 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 22:15:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 22:15:28 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 22:15:28 2012] Source does appear to be extended
[Fri Jul 13 22:15:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 13:11:01 2012] XMMSAS src. selection expression = ellipse(32943.637800, 34706.420000, 940.848027, 940.848027, 0.000000, X, Y)
[Sat Jul 14 13:11:01 2012] Writing source region out to fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src125_src.reg
[Sat Jul 14 13:11:01 2012] Extracting stamp from image fullrun_mos2_xmm0143980201_pi300-10000_cl_sm2.00.img.gz, (325, 345) - (433, 454)
[Sat Jul 14 13:11:01 2012] XMMSAS bgd. selection expression = annulus(32943.637800, 34706.420000, 1568.080045, 3136.160090, X, Y) && !ellipse(31646.429962, 35709.846100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29108.306915, 34915.471954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30336.759766, 35097.930878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33138.498016, 36121.596008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31153.774000, 34206.640600, 1680.776048, 1680.776048, 0.000000, X, Y) && !ellipse(32726.639252, 35975.051666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34034.981934, 36212.822815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30836.632000, 34617.090000, 2470.872071, 2470.872071, 0.000000, X, Y) && !ellipse(28627.386000, 33307.082000, 1543.968044, 331.083210, 298.848000, X, Y) && !ellipse(34665.687800, 36190.720840, 794.572023, 794.572023, 0.000000, X, Y) && !ellipse(32218.859589, 34156.144196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29767.502899, 35796.328369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31075.821686, 35444.632568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29260.270172, 35787.213654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34831.519928, 33095.226349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33106.228790, 35552.169220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28927.572000, 33537.872000, 1603.416046, 1603.416046, 0.000000, X, Y) && !ellipse(29198.126556, 32914.981720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32098.002655, 32978.349304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30527.228912, 35884.148773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34597.957001, 35719.993622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33632.001587, 31721.418610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35433.680573, 35966.167938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35935.149231, 35799.336517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36829.530365, 34677.095459, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 14 13:11:01 2012] Writing fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src125.gif
[Sat Jul 14 16:12:45 2012] Mean detx,y = (-7880.62, 4933.29) 
[Sat Jul 14 16:12:46 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 16:12:59 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 16:12:59 2012] Setting source spectrum file to fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src125_src_b10.pi.gz
[Sat Jul 14 16:12:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src125_bgd.pi.gz
[Sat Jul 14 20:24:55 2012] Updating aperture counts using extracted products
[Sat Jul 14 20:24:55 2012] Error reading totcts from fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src125_src_b10.pi.gz
[Sat Jul 14 20:24:59 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 20:24:59 2012] Using photon index=1.80, rate=0.0049, arf fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src125.arf
[Sat Jul 14 20:24:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 20:24:59 2012] Updating source flux to 7.7e-14
[Sat Jul 14 20:34:35 2012] Flag b found in src. 125 procflags, skipping spectral fitting
[Sat Jul 14 20:34:35 2012] Flag c found in src. 125 procflags, skipping spectral fitting