[Thu Jul 12 01:49:00 2012] Detection parameters:
  Position = (232.0, 282.9) = 15 4 4.62 -41 50 44.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1417.7 +/- 50.2
  Background counts = 146.4
  Rate = 0.07 +/- 0.002

[Thu Jul 12 01:49:04 2012] Off-axis axis estimate = 4.95'
[Thu Jul 12 12:56:10 2012] Using EEF radius (= 8.90 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 12:56:10 2012] Initial guess for spatial extent in simple fitting = 8.90"
[Thu Jul 12 12:56:10 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.157
[Thu Jul 12 12:56:10 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.90"
[Thu Jul 12 22:33:19 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jul 12 22:33:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src3.csv
[Thu Jul 12 22:33:19 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jul 12 22:33:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src3.csv
[Thu Jul 12 22:33:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 22:33:21 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jul 12 22:33:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Jul 12 22:33:21 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jul 12 22:33:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Jul 12 22:33:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 22:34:37 2012] Spatial fit model total counts = 6731.820000, observed total counts = 5354.000000
[Thu Jul 12 22:34:37 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jul 12 22:34:38 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 22:34:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 22:34:38 2012] Assessing source extent using major
[Thu Jul 12 22:34:38 2012] Source does appear to be extended
[Thu Jul 12 22:34:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 12:50:38 2012] Using EEF radius (= 8.90 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 12:50:38 2012] Initial guess for spatial extent in simple fitting = 8.90"
[Fri Jul 13 12:50:38 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.157
[Fri Jul 13 12:50:38 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 8.90"
[Fri Jul 13 22:14:08 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jul 13 22:14:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src3.csv
[Fri Jul 13 22:14:08 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jul 13 22:14:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src3.csv
[Fri Jul 13 22:14:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 22:14:10 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jul 13 22:14:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Jul 13 22:14:10 2012] fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jul 13 22:14:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Jul 13 22:14:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 22:15:27 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 17.715882 pixels away
[Fri Jul 13 22:15:27 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 11.052865 pixels away
[Fri Jul 13 22:15:28 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 22:15:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 22:15:28 2012] Assessing source extent using major
[Fri Jul 13 22:15:28 2012] Source does appear to be extended
[Fri Jul 13 22:15:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 22:15:28 2012] Source is confused with source 81
[Sat Jul 14 13:10:45 2012] Counts = 1417.701782, rescaling region sizes by 2.000000
[Sat Jul 14 13:10:45 2012] XMMSAS src. selection expression = ellipse(20134.601273, 24560.817871, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Jul 14 13:10:45 2012] Writing source region out to fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src1_src.reg
[Sat Jul 14 13:10:45 2012] Extracting stamp from image fullrun_mos2_xmm0143980201_pi300-10000_cl_sm2.00.img.gz, (157, 208) - (307, 358)
[Sat Jul 14 13:10:45 2012] XMMSAS bgd. selection expression = annulus(20134.601273, 24560.817871, 4350.000000, 8700.000000, X, Y) && !ellipse(19633.288400, 23484.216000, 1458.192042, 1458.192042, 0.000000, X, Y) && !ellipse(19444.778000, 22971.832000, 1473.608042, 1244.248036, 90.000000, X, Y) && !ellipse(19448.002000, 22645.814000, 1552.160045, 1552.160045, 0.000000, X, Y) && !ellipse(19030.667880, 21128.954000, 1441.448041, 1441.448041, 0.000000, X, Y) && !ellipse(19984.922000, 23943.940000, 1366.360039, 1366.360039, 0.000000, X, Y) && !ellipse(21032.230000, 28264.298800, 855.200025, 855.200025, 0.000000, X, Y) && !ellipse(21137.040000, 27031.928000, 1070.720031, 1070.720031, 0.000000, X, Y) && !ellipse(20827.386032, 26228.107239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18923.423800, 20845.718000, 1320.360038, 1320.360038, 0.000000, X, Y) && !ellipse(21397.042000, 29220.108000, 1397.112040, 1397.112040, 0.000000, X, Y) && !ellipse(25023.127502, 33684.101227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22362.247230, 28533.617002, 1636.752047, 641.286152, 128.799767, X, Y) && !ellipse(20849.299160, 25962.522000, 1715.336049, 847.544024, 90.000000, X, Y) && !ellipse(26936.246033, 22577.633118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18822.314060, 20091.660000, 1661.000048, 1661.000048, 0.000000, X, Y) && !ellipse(24478.012817, 33406.948029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23901.515680, 32827.016000, 1167.016034, 1167.016034, 0.000000, X, Y) && !ellipse(26124.228000, 34288.308000, 2190.424063, 833.672024, 187.562000, X, Y) && !ellipse(20746.985400, 27803.760000, 1393.776040, 660.624019, 303.105000, X, Y) && !ellipse(21536.638200, 29682.106000, 1407.104040, 1407.104040, 0.000000, X, Y) && !ellipse(20841.018280, 25109.054871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23145.586000, 29456.214000, 971.384028, 971.384028, 0.000000, X, Y) && !ellipse(25272.402000, 31335.648000, 1365.232039, 1365.232039, 0.000000, X, Y) && !ellipse(20002.046280, 25418.543671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22009.340400, 30849.132000, 1413.192041, 1413.192041, 0.000000, X, Y) && !ellipse(20189.698000, 26998.558000, 1393.776040, 1393.776040, 0.000000, X, Y) && !ellipse(26916.786000, 34069.878000, 1537.184044, 1537.184044, 0.000000, X, Y) && !ellipse(21593.090000, 30594.319400, 644.281619, 644.281619, 0.000000, X, Y) && !ellipse(24738.351715, 32752.677124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22657.408000, 28815.982000, 2252.704065, 2252.704065, 0.000000, X, Y) && !ellipse(24232.748000, 30193.582000, 2798.400081, 2798.400081, 0.000000, X, Y) && !ellipse(23653.748000, 30030.056000, 1347.648039, 1347.648039, 0.000000, X, Y) && !ellipse(22687.791800, 30412.322800, 540.142416, 540.142416, 0.000000, X, Y) && !ellipse(22177.293198, 30309.866974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22148.180801, 31520.666534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23368.682200, 31400.076200, 607.116017, 607.116017, 0.000000, X, Y) && !ellipse(23088.720947, 32140.876068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24524.350000, 30766.774000, 1098.072032, 1098.072032, 0.000000, X, Y) && !ellipse(21460.705200, 30198.632000, 874.032025, 874.032025, 0.000000, X, Y) && !ellipse(23313.366000, 29732.068000, 2013.056058, 2013.056058, 0.000000, X, Y) && !ellipse(19513.134583, 19958.021912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23134.721985, 32917.145569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25943.826000, 31900.568000, 2730.464079, 2730.464079, 0.000000, X, Y) && !ellipse(18824.467773, 19613.907547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25359.950000, 32596.091200, 1491.088043, 1491.088043, 0.000000, X, Y) && !ellipse(21791.690018, 26488.191254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22587.844000, 32705.646000, 1518.472044, 1518.472044, 0.000000, X, Y) && !ellipse(22640.641600, 26753.154000, 1066.832031, 1066.832031, 0.000000, X, Y) && !ellipse(23997.094086, 31286.118591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23921.020000, 32114.982000, 1326.616038, 1326.616038, 0.000000, X, Y) && !ellipse(20776.669662, 22028.042053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30836.632000, 34617.090000, 2470.872071, 2470.872071, 0.000000, X, Y) && !ellipse(27545.070801, 33368.667816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28627.386000, 33307.082000, 1543.968044, 331.083210, 298.848000, X, Y) && !ellipse(21615.742554, 22316.253448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22071.256638, 25613.988342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21745.657120, 23521.347351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21686.544220, 22750.302948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22800.326800, 25376.896000, 1219.664035, 1219.664035, 0.000000, X, Y) && !ellipse(28061.168671, 33877.177612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21846.516373, 21449.228409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20421.150620, 20738.384140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18912.093033, 17530.788818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26769.528000, 31985.360000, 1462.216042, 1462.216042, 0.000000, X, Y) && !ellipse(22168.256200, 20991.118400, 1419.048041, 1419.048041, 0.000000, X, Y) && !ellipse(23512.758331, 28765.221375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22178.438000, 23561.491200, 1349.120039, 1349.120039, 0.000000, X, Y) && !ellipse(28162.925323, 15637.893646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28927.572000, 33537.872000, 1603.416046, 1603.416046, 0.000000, X, Y) && !ellipse(29198.126556, 32914.981720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22247.087280, 24488.784271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18156.170349, 17355.688309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27091.440460, 15899.708740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22627.112244, 21439.727386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28154.206207, 20049.694763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28088.101288, 18833.551956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18667.728119, 16754.328156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19811.299683, 18301.976593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27890.293640, 19292.735291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18499.701935, 14997.102325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28031.830597, 30580.249847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20349.382523, 18400.703857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28315.427551, 25019.970673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25379.578461, 25523.247406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21467.218887, 20730.063278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23032.503357, 24684.943146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18730.504959, 15435.427750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19914.239151, 15320.273819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18744.305801, 15875.459030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27359.667450, 15010.021698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18959.785324, 16233.906570, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 14 13:10:45 2012] Writing fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src1.gif
[Sat Jul 14 13:20:44 2012] Mean detx,y = (7028.42, -1506.64) 
[Sat Jul 14 13:20:47 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 13:23:23 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 13:23:23 2012] Setting source spectrum file to fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul 14 13:23:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jul 14 16:45:29 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul 14 16:45:29 2012] rmf not generated due to insufficient counts
[Sat Jul 14 20:24:52 2012] Updating aperture counts using extracted products
[Sat Jul 14 20:24:52 2012] Error reading totcts from fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul 14 20:24:57 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 20:24:57 2012] Using photon index=1.80, rate=0.0699, arf fullrun_mos2_xmm0143980201_pi300-10000_pass1_cl_src1.arf
[Sat Jul 14 20:24:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 20:24:57 2012] Updating source flux to 1e-12
[Sat Jul 14 20:34:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting