[Thu Jul 12 01:47:49 2012] Detection parameters:
  Position = (261.2, 376.0) = 15 3 53.21 -41 43 59.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 443.7 +/- 33.6
  Background counts = 151.9
  Rate = 0.02 +/- 0.001

[Thu Jul 12 01:47:53 2012] Off-axis axis estimate = 6.24'
[Thu Jul 12 06:50:30 2012] Using EEF radius (= 9.55 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 06:50:30 2012] Initial guess for spatial extent in simple fitting = 9.55"
[Thu Jul 12 06:50:30 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.033
[Thu Jul 12 06:50:30 2012] Giving source the simple spatial ID 52 for pass 0, mean size = 9.55"
[Thu Jul 12 12:56:06 2012] fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_src52.ximg exists
[Thu Jul 12 12:56:06 2012] fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_src52_1.ximg exists
[Thu Jul 12 12:56:06 2012] Fit fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_src52 appears to have run properly
[Thu Jul 12 12:56:08 2012] fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Thu Jul 12 12:56:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src52.csv
[Thu Jul 12 12:56:08 2012] fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Thu Jul 12 12:56:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src52.csv
[Thu Jul 12 12:56:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 22:34:15 2012] Source 57 is offset by 4.096872 and 1.962021 pixels which is larger than
2 X fitted extent = 1.097356 x 1.097356, not incorporating fit results
[Thu Jul 12 22:34:16 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 22:34:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 22:34:16 2012] Assessing source extent using major
[Thu Jul 12 22:34:16 2012] Source does appear to be extended
[Thu Jul 12 22:34:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 22:34:16 2012] Source is confused with source 55
[Fri Jul 13 04:58:24 2012] Using EEF radius (= 9.55 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 04:58:24 2012] Initial guess for spatial extent in simple fitting = 9.55"
[Fri Jul 13 04:58:24 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.033
[Fri Jul 13 04:58:24 2012] Giving source the simple spatial ID 49 for pass 1, mean size = 9.55"
[Fri Jul 13 12:50:33 2012] fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_src49.ximg exists
[Fri Jul 13 12:50:33 2012] fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_src49_1.ximg exists
[Fri Jul 13 12:50:33 2012] Fit fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_src49 appears to have run properly
[Fri Jul 13 12:50:36 2012] fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Fri Jul 13 12:50:36 2012] fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Fri Jul 13 12:50:36 2012] Fit fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src49 appears to have run properly
[Fri Jul 13 22:15:05 2012] Spatial fit model total counts = 12399.800000, observed total counts = 11528.000000
[Fri Jul 13 22:15:05 2012] Offset between fit and detection position for source 57 = 5.298780 pixels
[Fri Jul 13 22:15:05 2012] Warning, changing simple spatial fit ID from 49 to 24
[Fri Jul 13 22:15:05 2012] 12484.620000 total counts/ 8747.650000 bgd. counts: snr = 39.955256
Spatial fit parameters:
  Offset between fit and detection position for source 57 = 5.298780 pixels
  Position = (260.7, 370.7) = 15 3 53.40 -41 44 22.8
  Extent = 37.7 (37.1-75.4)" x 29.1 (26.4-31.9)", rotation angle = 316 (305-326) degrees
  Source counts = 3737.0 +/- 111.7
  Background counts = 8747.6
  Rate = 0.1 +/- 0.004
[Fri Jul 13 22:15:05 2012] Spatial fit model total counts = 4678.520000, observed total counts = 4602.000000
[Fri Jul 13 22:15:05 2012] Offset between fit and detection position for source 57 = 1.775213 pixels
[Fri Jul 13 22:15:05 2012] Warning, changing simple spatial fit ID from 24 to 35
[Fri Jul 13 22:15:05 2012] 4492.237000 total counts/ 4140.080000 bgd. counts: snr = 5.473082
Spatial fit parameters:
  Offset between fit and detection position for source 57 = 1.775213 pixels
  Position = (259.4, 369.6) = 15 3 53.93 -41 44 27.8
  Extent = 18.9 (18.8-37.7)", rotation angle = 0
  Source counts = 352.2 +/- 67.0
  Background counts = 4140.1
  Rate = 0.01 +/- 0.003
[Fri Jul 13 22:15:05 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 22:15:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 22:15:05 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 22:15:05 2012] Source does appear to be extended
[Fri Jul 13 22:15:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 05:52:38 2012] XMMSAS src. selection expression = ellipse(22518.140000, 32103.370000, 1131.318033, 1131.318033, 0.000000, X, Y)
[Sat Jul 14 05:52:38 2012] Writing source region out to fullrun_mos1_xmm0143980201_pi300-10000_pass1_cl_src57_src.reg
[Sat Jul 14 05:52:38 2012] Extracting stamp from image fullrun_mos1_xmm0143980201_pi300-10000_cl_sm2.00.img.gz, (194, 305) - (324, 435)
[Sat Jul 14 05:52:38 2012] XMMSAS bgd. selection expression = annulus(22518.140000, 32103.370000, 1885.530054, 3771.060109, X, Y) && !ellipse(26198.955017, 31237.178436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26349.858917, 34777.237854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27163.058000, 34827.666000, 1289.888037, 1289.888037, 0.000000, X, Y) && !ellipse(25704.816895, 34585.807587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21072.420000, 28471.886560, 1627.056047, 579.280017, 115.239000, X, Y) && !ellipse(21924.948000, 27783.552000, 1551.952045, 1551.952045, 0.000000, X, Y) && !ellipse(20828.169266, 27583.746613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24227.518000, 33499.356000, 3019.376087, 3019.376087, 0.000000, X, Y) && !ellipse(21249.806000, 28857.642000, 1396.848040, 1396.848040, 0.000000, X, Y) && !ellipse(25939.824000, 34126.336000, 1728.016050, 1728.016050, 0.000000, X, Y) && !ellipse(21653.851517, 30580.722443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20453.002000, 27250.091400, 1397.320040, 816.200023, 305.059000, X, Y) && !ellipse(22579.910000, 28826.218000, 1327.016038, 496.477614, 130.122000, X, Y) && !ellipse(23584.652000, 32831.597600, 1508.424043, 1508.424043, 0.000000, X, Y) && !ellipse(25290.308411, 33694.461151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21544.164000, 29541.890000, 1401.800040, 1401.800040, 0.000000, X, Y) && !ellipse(24068.952454, 34040.145966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21963.247000, 31125.582000, 1142.000033, 1142.000033, 0.000000, X, Y) && !ellipse(24183.509003, 31394.048187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24575.340881, 32842.387909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24575.448000, 30739.688000, 1166.160034, 1166.160034, 0.000000, X, Y) && !ellipse(23195.859344, 32579.664795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25412.946000, 33167.996000, 1479.840043, 472.190414, 338.460200, X, Y) && !ellipse(22761.050000, 29954.644000, 787.641623, 787.641623, 0.000000, X, Y) && !ellipse(25807.585114, 32104.305695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23136.304382, 31294.410248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22200.554000, 31558.840000, 1483.408043, 1483.408043, 0.000000, X, Y) && !ellipse(24057.358000, 30227.610000, 1353.144039, 1353.144039, 0.000000, X, Y) && !ellipse(25111.636000, 31100.534000, 1357.312039, 1357.312039, 0.000000, X, Y) && !ellipse(23002.469666, 33062.221680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25028.662000, 32435.120000, 1509.688043, 1509.688043, 0.000000, X, Y) && !ellipse(26755.892548, 33360.981506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27012.357758, 32839.440826, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 14 05:52:38 2012] Writing fullrun_mos1_xmm0143980201_pi300-10000_pass1_cl_src57.gif
[Sat Jul 14 07:43:36 2012] Mean detx,y = (5285.64, -2780.47) 
[Sat Jul 14 07:43:37 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 07:44:05 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 07:44:06 2012] Setting source spectrum file to fullrun_mos1_xmm0143980201_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Sat Jul 14 07:44:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0143980201_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Sat Jul 14 20:24:46 2012] Updating aperture counts using extracted products
[Sat Jul 14 20:24:46 2012] Error reading totcts from fullrun_mos1_xmm0143980201_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Sat Jul 14 20:24:49 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 20:24:49 2012] Using photon index=1.80, rate=0.0136, arf fullrun_mos1_xmm0143980201_pi300-10000_pass1_cl_src57.arf
[Sat Jul 14 20:24:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 20:24:49 2012] Updating source flux to 1.5e-13
[Sat Jul 14 20:25:05 2012] Flag b found in src. 57 procflags, skipping spectral fitting
[Sat Jul 14 20:25:05 2012] Flag c found in src. 57 procflags, skipping spectral fitting