[Thu Jul 12 01:47:49 2012] Detection parameters:
  Position = (325.2, 397.9) = 15 3 28.37 -41 42 22.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 382.0 +/- 32.1
  Background counts = 242.1
  Rate = 0.02 +/- 0.001

[Thu Jul 12 01:47:53 2012] Off-axis axis estimate = 7.46'
[Thu Jul 12 06:50:30 2012] Using EEF radius (= 10.16 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 06:50:30 2012] Initial guess for spatial extent in simple fitting = 10.16"
[Thu Jul 12 06:50:30 2012] source mask rpix=2.3, npix_max = 32, mask sum = 34, frac = 1.057
[Thu Jul 12 06:50:30 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 10.16"
[Thu Jul 12 12:56:06 2012] fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_src61.ximg exists
[Thu Jul 12 12:56:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_src61.csv
[Thu Jul 12 12:56:06 2012] fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_src61_1.ximg exists
[Thu Jul 12 12:56:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_src61.csv
[Thu Jul 12 12:56:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 12:56:09 2012] fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Thu Jul 12 12:56:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src61.csv
[Thu Jul 12 12:56:09 2012] fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Thu Jul 12 12:56:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src61.csv
[Thu Jul 12 12:56:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 22:34:15 2012] Source 43 is offset by 2.879252 and -1.412985 pixels which is larger than
2 X fitted extent = 1.215752 x 1.215752, not incorporating fit results
[Thu Jul 12 22:34:15 2012] Source 43 is offset by 4.716631 and -5.300525 pixels which is larger than
2 X fitted extent = 2.993729 x 2.993729, not incorporating fit results
[Thu Jul 12 22:34:16 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 22:34:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 22:34:16 2012] Assessing source extent using major
[Thu Jul 12 22:34:16 2012] Source does appear to be extended
[Thu Jul 12 22:34:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 22:34:16 2012] Source is confused with source 41
[Thu Jul 12 22:34:16 2012] Source is confused with source 106
[Fri Jul 13 04:58:24 2012] Using EEF radius (= 10.16 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 04:58:24 2012] Initial guess for spatial extent in simple fitting = 10.16"
[Fri Jul 13 04:58:24 2012] source mask rpix=2.3, npix_max = 32, mask sum = 34, frac = 1.057
[Fri Jul 13 04:58:24 2012] Giving source the simple spatial ID 58 for pass 1, mean size = 10.16"
[Fri Jul 13 12:50:33 2012] fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_src58.ximg exists
[Fri Jul 13 12:50:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_src58.csv
[Fri Jul 13 12:50:33 2012] fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_src58_1.ximg exists
[Fri Jul 13 12:50:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_src58.csv
[Fri Jul 13 12:50:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 12:50:37 2012] fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src58.ximg exists
[Fri Jul 13 12:50:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src58.csv
[Fri Jul 13 12:50:37 2012] fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src58_1.ximg exists
[Fri Jul 13 12:50:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src58.csv
[Fri Jul 13 12:50:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 22:15:05 2012] Source 43 is offset by 4.799390 and -5.241031 pixels which is larger than
2 X fitted extent = 2.979264 x 2.979264, not incorporating fit results
[Fri Jul 13 22:15:05 2012] Spatial fit model total counts = 3607.950000, observed total counts = 3303.000000
[Fri Jul 13 22:15:05 2012] Offset between fit and detection position for source 43 = 2.966656 pixels
[Fri Jul 13 22:15:05 2012] Warning, changing simple spatial fit ID from 58 to 63
[Fri Jul 13 22:15:05 2012] 3625.022000 total counts/ 2982.700000 bgd. counts: snr = 11.761102
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 2.966656 pixels
  Position = (324.1, 395.1) = 15 3 28.77 -41 42 36.9
  Extent = 20.5 (20.5-41.1)", rotation angle = 0
  Source counts = 642.3 +/- 60.2
  Background counts = 2982.7
  Rate = 0.02 +/- 0.002
[Fri Jul 13 22:15:05 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 22:15:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 22:15:05 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 22:15:05 2012] Source does appear to be extended
[Fri Jul 13 22:15:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 05:52:39 2012] XMMSAS src. selection expression = ellipse(28151.130000, 34323.028000, 1232.748035, 1232.748035, 0.000000, X, Y)
[Sat Jul 14 05:52:39 2012] Writing source region out to fullrun_mos1_xmm0143980201_pi300-10000_pass1_cl_src43_src.reg
[Sat Jul 14 05:52:39 2012] Extracting stamp from image fullrun_mos1_xmm0143980201_pi300-10000_cl_sm2.00.img.gz, (253, 324) - (395, 466)
[Sat Jul 14 05:52:39 2012] XMMSAS bgd. selection expression = annulus(28151.130000, 34323.028000, 2054.580059, 4109.160118, X, Y) && !ellipse(26198.955017, 31237.178436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26349.858917, 34777.237854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27163.058000, 34827.666000, 1289.888037, 1289.888037, 0.000000, X, Y) && !ellipse(25704.816895, 34585.807587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24227.518000, 33499.356000, 3019.376087, 3019.376087, 0.000000, X, Y) && !ellipse(25939.824000, 34126.336000, 1728.016050, 1728.016050, 0.000000, X, Y) && !ellipse(23584.652000, 32831.597600, 1508.424043, 1508.424043, 0.000000, X, Y) && !ellipse(25290.308411, 33694.461151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24068.952454, 34040.145966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24183.509003, 31394.048187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24575.340881, 32842.387909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31551.905609, 35792.980377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24575.448000, 30739.688000, 1166.160034, 1166.160034, 0.000000, X, Y) && !ellipse(23195.859344, 32579.664795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25412.946000, 33167.996000, 1479.840043, 472.190414, 338.460200, X, Y) && !ellipse(25807.585114, 32104.305695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24057.358000, 30227.610000, 1353.144039, 1353.144039, 0.000000, X, Y) && !ellipse(25111.636000, 31100.534000, 1357.312039, 1357.312039, 0.000000, X, Y) && !ellipse(27171.855988, 34284.222809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33102.908400, 36201.113400, 1866.400054, 800.928023, -0.000000, X, Y) && !ellipse(28828.283630, 35436.255951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30813.387970, 35259.136292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30070.909027, 35777.443146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25028.662000, 32435.120000, 1509.688043, 1509.688043, 0.000000, X, Y) && !ellipse(28678.943542, 34718.272308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31092.200562, 34314.715820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30157.038177, 35090.910980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29104.722626, 34863.228943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27982.950000, 33044.246000, 1544.384044, 1544.384044, 0.000000, X, Y) && !ellipse(26755.892548, 33360.981506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29237.036011, 35585.447357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28416.844360, 33361.355865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30598.654510, 35947.019867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27012.357758, 32839.440826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28118.816000, 33920.578000, 1661.848048, 1661.848048, 0.000000, X, Y) && !ellipse(27700.443115, 33444.014893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32229.769104, 34663.047699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32073.666656, 34069.869019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30220.461517, 34069.797333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31704.933533, 34850.814026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27313.127441, 31549.728485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29699.850098, 33956.743530, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 14 05:52:39 2012] Writing fullrun_mos1_xmm0143980201_pi300-10000_pass1_cl_src43.gif
[Sat Jul 14 07:46:34 2012] Mean detx,y = (6079.48, 3000.04) 
[Sat Jul 14 07:46:36 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 07:47:11 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 07:47:11 2012] Setting source spectrum file to fullrun_mos1_xmm0143980201_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sat Jul 14 07:47:11 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0143980201_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Sat Jul 14 20:24:46 2012] Updating aperture counts using extracted products
[Sat Jul 14 20:24:46 2012] Error reading totcts from fullrun_mos1_xmm0143980201_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sat Jul 14 20:24:49 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 20:24:49 2012] Using photon index=1.80, rate=0.0249, arf fullrun_mos1_xmm0143980201_pi300-10000_pass1_cl_src43.arf
[Sat Jul 14 20:24:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 20:24:49 2012] Updating source flux to 2.8e-13
[Sat Jul 14 20:25:05 2012] Flag b found in src. 43 procflags, skipping spectral fitting
[Sat Jul 14 20:25:05 2012] Flag c found in src. 43 procflags, skipping spectral fitting