[Thu Jul 12 01:47:49 2012] Detection parameters:
  Position = (347.2, 403.9) = 15 3 19.81 -41 41 56.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 303.9 +/- 29.3
  Background counts = 207.2
  Rate = 0.01 +/- 0.001

[Thu Jul 12 01:47:53 2012] Off-axis axis estimate = 8.42'
[Thu Jul 12 06:50:30 2012] Using EEF radius (= 10.64 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 06:50:30 2012] Initial guess for spatial extent in simple fitting = 10.64"
[Thu Jul 12 06:50:30 2012] source mask rpix=2.4, npix_max = 34, mask sum = 35, frac = 1.008
[Thu Jul 12 06:50:30 2012] Giving source the simple spatial ID 72 for pass 0, mean size = 10.64"
[Thu Jul 12 12:56:06 2012] fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_src72.ximg exists
[Thu Jul 12 12:56:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_src72.csv
[Thu Jul 12 12:56:06 2012] fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_src72_1.ximg exists
[Thu Jul 12 12:56:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_src72.csv
[Thu Jul 12 12:56:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_src72_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 12:56:09 2012] fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src72.ximg exists
[Thu Jul 12 12:56:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src72.csv
[Thu Jul 12 12:56:09 2012] fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src72_1.ximg exists
[Thu Jul 12 12:56:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src72.csv
[Thu Jul 12 12:56:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src72_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 22:34:15 2012] Spatial fit model total counts = 3336.800000, observed total counts = 2879.000000
[Thu Jul 12 22:34:15 2012] Poor agreement between spatial fit and data for source 40
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jul 12 22:34:16 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 22:34:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 22:34:16 2012] Assessing source extent using major
[Thu Jul 12 22:34:16 2012] Source does appear to be extended
[Thu Jul 12 22:34:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 04:58:24 2012] Using EEF radius (= 10.64 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 04:58:24 2012] Initial guess for spatial extent in simple fitting = 10.64"
[Fri Jul 13 04:58:24 2012] source mask rpix=2.4, npix_max = 34, mask sum = 35, frac = 1.008
[Fri Jul 13 04:58:24 2012] Giving source the simple spatial ID 66 for pass 1, mean size = 10.64"
[Fri Jul 13 12:50:33 2012] fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_src66.ximg exists
[Fri Jul 13 12:50:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_src66.csv
[Fri Jul 13 12:50:33 2012] fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_src66_1.ximg exists
[Fri Jul 13 12:50:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_src66.csv
[Fri Jul 13 12:50:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_src66_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 12:50:37 2012] fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src66.ximg exists
[Fri Jul 13 12:50:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src66.csv
[Fri Jul 13 12:50:37 2012] fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src66_1.ximg exists
[Fri Jul 13 12:50:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src66.csv
[Fri Jul 13 12:50:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src66_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 22:15:05 2012] Source 40 is offset by -1.290320 and -1.686219 pixels which is larger than
2 X fitted extent = 1.341209 x 1.341209, not incorporating fit results
[Fri Jul 13 22:15:05 2012] Warning, spatial fit 66 centroid is now closest to src. 35
[Fri Jul 13 22:15:05 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 22:15:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 22:15:05 2012] Assessing source extent using major
[Fri Jul 13 22:15:05 2012] Source does appear to be extended
[Fri Jul 13 22:15:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 05:52:39 2012] XMMSAS src. selection expression = ellipse(30157.038177, 35090.910980, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 14 05:52:39 2012] Writing source region out to fullrun_mos1_xmm0143980201_pi300-10000_pass1_cl_src40_src.reg
[Sat Jul 14 05:52:39 2012] Extracting stamp from image fullrun_mos1_xmm0143980201_pi300-10000_cl_sm2.00.img.gz, (310, 366) - (385, 441)
[Sat Jul 14 05:52:39 2012] XMMSAS bgd. selection expression = annulus(30157.038177, 35090.910980, 1087.500000, 2175.000000, X, Y) && !ellipse(27163.058000, 34827.666000, 1289.888037, 1289.888037, 0.000000, X, Y) && !ellipse(31551.905609, 35792.980377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27171.855988, 34284.222809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33102.908400, 36201.113400, 1866.400054, 800.928023, -0.000000, X, Y) && !ellipse(28828.283630, 35436.255951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30813.387970, 35259.136292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30070.909027, 35777.443146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28151.130000, 34323.028000, 1643.664047, 1643.664047, 0.000000, X, Y) && !ellipse(28678.943542, 34718.272308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31092.200562, 34314.715820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29104.722626, 34863.228943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27982.950000, 33044.246000, 1544.384044, 1544.384044, 0.000000, X, Y) && !ellipse(29237.036011, 35585.447357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28416.844360, 33361.355865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30598.654510, 35947.019867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28118.816000, 33920.578000, 1661.848048, 1661.848048, 0.000000, X, Y) && !ellipse(27700.443115, 33444.014893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32229.769104, 34663.047699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32073.666656, 34069.869019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30220.461517, 34069.797333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31704.933533, 34850.814026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29699.850098, 33956.743530, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 14 05:52:39 2012] Writing fullrun_mos1_xmm0143980201_pi300-10000_pass1_cl_src40.gif
[Sat Jul 14 07:49:32 2012] Mean detx,y = (6199.61, 5242.42) 
[Sat Jul 14 07:49:33 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 07:49:49 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 07:49:50 2012] Setting source spectrum file to fullrun_mos1_xmm0143980201_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Sat Jul 14 07:49:50 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0143980201_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Sat Jul 14 11:57:46 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul 14 11:57:46 2012] rmf not generated due to insufficient counts
[Sat Jul 14 20:24:46 2012] Updating aperture counts using extracted products
[Sat Jul 14 20:24:46 2012] Error reading totcts from fullrun_mos1_xmm0143980201_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Sat Jul 14 20:24:50 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 20:24:50 2012] Using photon index=1.80, rate=0.0142, arf fullrun_mos1_xmm0143980201_pi300-10000_pass1_cl_src40.arf
[Sat Jul 14 20:24:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 20:24:50 2012] Updating source flux to 2e-13
[Sat Jul 14 20:25:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting