[Thu Jul 12 01:47:49 2012] Detection parameters:
  Position = (218.7, 238.1) = 15 4 9.83 -41 54 0.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 929.3 +/- 43.5
  Background counts = 121.0
  Rate = 0.06 +/- 0.003

[Thu Jul 12 01:47:53 2012] Off-axis axis estimate = 7.25'
[Thu Jul 12 06:50:30 2012] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 06:50:30 2012] Initial guess for spatial extent in simple fitting = 10.06"
[Thu Jul 12 06:50:30 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.949
[Thu Jul 12 06:50:30 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 10.06"
[Thu Jul 12 12:56:05 2012] fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_src11.ximg exists
[Thu Jul 12 12:56:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_src11.csv
[Thu Jul 12 12:56:05 2012] fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu Jul 12 12:56:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_src11.csv
[Thu Jul 12 12:56:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 12:56:07 2012] fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu Jul 12 12:56:07 2012] fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Jul 12 12:56:07 2012] Fit fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu Jul 12 22:34:15 2012] Warning, spatial fit 11 centroid is now closest to src. 6
[Thu Jul 12 22:34:16 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 22:34:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 22:34:16 2012] Assessing source extent using major
[Thu Jul 12 22:34:16 2012] Source does appear to be extended
[Thu Jul 12 22:34:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 22:34:16 2012] Source is confused with source 26
[Fri Jul 13 04:58:24 2012] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 04:58:24 2012] Initial guess for spatial extent in simple fitting = 10.06"
[Fri Jul 13 04:58:24 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.949
[Fri Jul 13 04:58:24 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 10.06"
[Fri Jul 13 12:50:32 2012] fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_src11.ximg exists
[Fri Jul 13 12:50:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_src11.csv
[Fri Jul 13 12:50:32 2012] fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri Jul 13 12:50:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_src11.csv
[Fri Jul 13 12:50:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 12:50:35 2012] fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri Jul 13 12:50:35 2012] fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Jul 13 12:50:35 2012] Fit fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Fri Jul 13 22:15:05 2012] Warning, spatial fit 11 centroid is now closest to src. 26
[Fri Jul 13 22:15:05 2012] Source 27 is offset by -8.791924 and -1.394829 pixels which is larger than
2 X fitted extent = 1.181835 x 1.181835, not incorporating fit results
[Fri Jul 13 22:15:05 2012] Source 27 is offset by -8.281717 and -3.918209 pixels which is larger than
2 X fitted extent = 6.221701 x 6.221701, not incorporating fit results
[Fri Jul 13 22:15:05 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 22:15:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 22:15:05 2012] Assessing source extent using major
[Fri Jul 13 22:15:05 2012] Source does appear to be extended
[Fri Jul 13 22:15:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 05:52:35 2012] XMMSAS src. selection expression = ellipse(18975.160599, 20662.707840, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 14 05:52:35 2012] Writing source region out to fullrun_mos1_xmm0143980201_pi300-10000_pass1_cl_src27_src.reg
[Sat Jul 14 05:52:35 2012] Extracting stamp from image fullrun_mos1_xmm0143980201_pi300-10000_cl_sm2.00.img.gz, (181, 201) - (256, 276)
[Sat Jul 14 05:52:35 2012] XMMSAS bgd. selection expression = annulus(18975.160599, 20662.707840, 1087.500000, 2175.000000, X, Y) && !ellipse(19101.581596, 21931.972000, 1627.056047, 901.290339, 286.323087, X, Y) && !ellipse(19168.232000, 22301.096000, 1507.968043, 1507.968043, 0.000000, X, Y) && !ellipse(19908.533200, 23881.428000, 2502.600072, 1097.640032, 112.950000, X, Y) && !ellipse(19452.354600, 22673.626000, 1388.472040, 1388.472040, 0.000000, X, Y) && !ellipse(19046.207400, 21119.696000, 1436.216041, 1436.216041, 0.000000, X, Y) && !ellipse(20216.727966, 22141.119751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21146.714000, 24780.346000, 2666.512077, 2666.512077, 0.000000, X, Y) && !ellipse(18911.348297, 19876.432861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18824.004471, 19095.817078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19021.022247, 18746.707275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21542.259308, 23373.353363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21980.988297, 21706.098511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21729.745529, 22325.700043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21395.693726, 20826.481995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19081.140076, 18131.246262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18112.332600, 17716.216400, 831.272024, 831.272024, 0.000000, X, Y) && !ellipse(20557.117325, 19796.543030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20936.312592, 21176.767975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21492.399185, 20306.959137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19872.427750, 17969.625336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21169.270000, 19644.928000, 1596.448046, 1596.448046, 0.000000, X, Y)
[Sat Jul 14 05:52:35 2012] Writing fullrun_mos1_xmm0143980201_pi300-10000_pass1_cl_src27.gif
[Sat Jul 14 06:39:03 2012] Mean detx,y = (-4522.06, -9460.91) 
[Sat Jul 14 06:39:04 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 06:39:15 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 06:39:15 2012] Setting source spectrum file to fullrun_mos1_xmm0143980201_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sat Jul 14 06:39:15 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0143980201_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Sat Jul 14 08:48:34 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul 14 08:48:34 2012] rmf not generated due to insufficient counts
[Sat Jul 14 20:24:45 2012] Updating aperture counts using extracted products
[Sat Jul 14 20:24:45 2012] Error reading totcts from fullrun_mos1_xmm0143980201_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sat Jul 14 20:24:48 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 20:24:48 2012] Using photon index=1.80, rate=0.0602, arf fullrun_mos1_xmm0143980201_pi300-10000_pass1_cl_src27.arf
[Sat Jul 14 20:24:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 20:24:48 2012] Updating source flux to 1.1e-12
[Sat Jul 14 20:25:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting