[Thu Jul 12 01:47:48 2012] Detection parameters:
  Position = (262.0, 334.9) = 15 3 52.92 -41 46 58.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 961.0 +/- 48.3
  Background counts = 312.6
  Rate = 0.04 +/- 0.002

[Thu Jul 12 01:47:53 2012] Off-axis axis estimate = 3.73'
[Thu Jul 12 06:50:30 2012] Using EEF radius (= 8.30 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 06:50:30 2012] Initial guess for spatial extent in simple fitting = 8.30"
[Thu Jul 12 06:50:30 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.863
[Thu Jul 12 06:50:30 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 8.30"
[Thu Jul 12 12:56:05 2012] fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_src23.ximg exists
[Thu Jul 12 12:56:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_src23.csv
[Thu Jul 12 12:56:05 2012] fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_src23_1.ximg exists
[Thu Jul 12 12:56:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_src23.csv
[Thu Jul 12 12:56:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 12:56:08 2012] fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Thu Jul 12 12:56:08 2012] fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Thu Jul 12 12:56:08 2012] Fit fullrun_mos1_xmm0143980201_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Thu Jul 12 22:34:15 2012] Spatial fit model total counts = 6602.480000, observed total counts = 6671.000000
[Thu Jul 12 22:34:15 2012] Offset between fit and detection position for source 18 = 3.570818 pixels
[Thu Jul 12 22:34:15 2012] Warning, changing simple spatial fit ID from 23 to 16
[Thu Jul 12 22:34:15 2012] 6510.470000 total counts/ 5817.910000 bgd. counts: snr = 9.079750
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 3.570818 pixels
  Position = (260.1, 331.8) = 15 3 53.66 -41 47 12.0
  Extent = 16.6 (16.4-33.2)" x 6.6 (5.2-7.7)", rotation angle = 311 (304-317) degrees
  Source counts = 692.6 +/- 80.7
  Background counts = 5817.9
  Rate = 0.03 +/- 0.003
[Thu Jul 12 22:34:15 2012] Spatial fit model total counts = 6760.210000, observed total counts = 6736.000000
[Thu Jul 12 22:34:15 2012] Offset between fit and detection position for source 18 = 0.738063 pixels
[Thu Jul 12 22:34:15 2012] Warning, changing simple spatial fit ID from 16 to 23
[Thu Jul 12 22:34:15 2012] 6532.550000 total counts/ 4642.140000 bgd. counts: snr = 27.745777
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.738063 pixels
  Position = (260.1, 331.1) = 15 3 53.64 -41 47 15.2
  Extent = 16.6 (16.6-33.2)", rotation angle = 0
  Source counts = 1890.4 +/- 80.8
  Background counts = 4642.1
  Rate = 0.07 +/- 0.003
[Thu Jul 12 22:34:16 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 22:34:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 22:34:16 2012] Assessing source extent using major axis lower bound
[Thu Jul 12 22:34:16 2012] Source does appear to be extended
[Thu Jul 12 22:34:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 22:34:16 2012] Source is confused with source 19
[Fri Jul 13 04:58:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 13 04:58:24 2012] Initial guess for spatial extent in simple fitting = 16.59"
[Fri Jul 13 04:58:24 2012] source mask rpix=3.8, npix_max = 74, mask sum = 58, frac = 0.779
[Fri Jul 13 04:58:24 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 16.59"
[Fri Jul 13 12:50:32 2012] fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_src23.ximg exists
[Fri Jul 13 12:50:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_src23.csv
[Fri Jul 13 12:50:32 2012] fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_src23_1.ximg exists
[Fri Jul 13 12:50:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_src23.csv
[Fri Jul 13 12:50:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 12:50:35 2012] fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Fri Jul 13 12:50:35 2012] fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Fri Jul 13 12:50:35 2012] Fit fullrun_mos1_xmm0143980201_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Fri Jul 13 22:15:05 2012] Spatial fit model total counts = 6608.030000, observed total counts = 6671.000000
[Fri Jul 13 22:15:05 2012] Offset between fit and detection position for source 18 = 0.799890 pixels
[Fri Jul 13 22:15:05 2012] Warning, changing simple spatial fit ID from 23 to 16
[Fri Jul 13 22:15:05 2012] 6472.569000 total counts/ 5826.840000 bgd. counts: snr = 8.459287
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.799890 pixels
  Position = (260.1, 331.9) = 15 3 53.66 -41 47 11.7
  Extent = 16.6 (15.7-33.2)" x 6.2 (5.1-7.5)", rotation angle = 130 (124-136) degrees
  Source counts = 645.7 +/- 80.5
  Background counts = 5826.8
  Rate = 0.03 +/- 0.003
[Fri Jul 13 22:15:05 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 22:15:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 22:15:05 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 22:15:05 2012] Source does appear to be extended
[Fri Jul 13 22:15:05 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.10
[Fri Jul 13 22:15:05 2012] Source is asymmetric
[Sat Jul 14 05:52:36 2012] XMMSAS src. selection expression = ellipse(22579.910000, 28826.218000, 995.262029, 372.358211, 130.122000, X, Y)
[Sat Jul 14 05:52:36 2012] Writing source region out to fullrun_mos1_xmm0143980201_pi300-10000_pass1_cl_src18_src.reg
[Sat Jul 14 05:52:36 2012] Extracting stamp from image fullrun_mos1_xmm0143980201_pi300-10000_cl_sm2.00.img.gz, (203, 275) - (317, 389)
[Sat Jul 14 05:52:36 2012] XMMSAS bgd. selection expression = annulus(22579.910000, 28826.218000, 1658.770048, 3317.540095, X, Y) && !ellipse(26198.955017, 31237.178436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20096.245000, 24338.350000, 1436.616041, 1436.616041, 0.000000, X, Y) && !ellipse(19908.533200, 23881.428000, 2502.600072, 1097.640032, 112.950000, X, Y) && !ellipse(21072.420000, 28471.886560, 1627.056047, 579.280017, 115.239000, X, Y) && !ellipse(21924.948000, 27783.552000, 1551.952045, 1551.952045, 0.000000, X, Y) && !ellipse(20762.867493, 25974.432465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20828.169266, 27583.746613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24227.518000, 33499.356000, 3019.376087, 3019.376087, 0.000000, X, Y) && !ellipse(21249.806000, 28857.642000, 1396.848040, 1396.848040, 0.000000, X, Y) && !ellipse(21653.851517, 30580.722443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20453.002000, 27250.091400, 1397.320040, 816.200023, 305.059000, X, Y) && !ellipse(23584.652000, 32831.597600, 1508.424043, 1508.424043, 0.000000, X, Y) && !ellipse(21544.164000, 29541.890000, 1401.800040, 1401.800040, 0.000000, X, Y) && !ellipse(21963.247000, 31125.582000, 1142.000033, 1142.000033, 0.000000, X, Y) && !ellipse(24183.509003, 31394.048187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24575.340881, 32842.387909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24575.448000, 30739.688000, 1166.160034, 1166.160034, 0.000000, X, Y) && !ellipse(23195.859344, 32579.664795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25412.946000, 33167.996000, 1479.840043, 472.190414, 338.460200, X, Y) && !ellipse(21146.714000, 24780.346000, 2666.512077, 2666.512077, 0.000000, X, Y) && !ellipse(22761.050000, 29954.644000, 787.641623, 787.641623, 0.000000, X, Y) && !ellipse(25807.585114, 32104.305695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23136.304382, 31294.410248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22200.554000, 31558.840000, 1483.408043, 1483.408043, 0.000000, X, Y) && !ellipse(24057.358000, 30227.610000, 1353.144039, 1353.144039, 0.000000, X, Y) && !ellipse(25111.636000, 31100.534000, 1357.312039, 1357.312039, 0.000000, X, Y) && !ellipse(20171.326965, 26025.600189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22518.140000, 32103.370000, 1508.424043, 1508.424043, 0.000000, X, Y) && !ellipse(22244.859711, 25969.825989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25028.662000, 32435.120000, 1509.688043, 1509.688043, 0.000000, X, Y) && !ellipse(22661.245300, 26228.216095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22107.128000, 25209.269800, 1333.256038, 1333.256038, 0.000000, X, Y) && !ellipse(23397.227386, 26411.622864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23188.020000, 24838.350000, 1244.384036, 1244.384036, 0.000000, X, Y)
[Sat Jul 14 05:52:36 2012] Writing fullrun_mos1_xmm0143980201_pi300-10000_pass1_cl_src18.gif
[Sat Jul 14 07:07:08 2012] Mean detx,y = (2343.54, -3789.92) 
[Sat Jul 14 07:07:09 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 07:07:30 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 07:07:30 2012] Setting source spectrum file to fullrun_mos1_xmm0143980201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sat Jul 14 07:07:30 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0143980201_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sat Jul 14 20:24:45 2012] Updating aperture counts using extracted products
[Sat Jul 14 20:24:45 2012] Error reading totcts from fullrun_mos1_xmm0143980201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sat Jul 14 20:24:49 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 20:24:49 2012] Using photon index=1.80, rate=0.025, arf fullrun_mos1_xmm0143980201_pi300-10000_pass1_cl_src18.arf
[Sat Jul 14 20:24:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 20:24:49 2012] Updating source flux to 3.3e-13
[Sat Jul 14 20:25:05 2012] Flag c found in src. 18 procflags, skipping spectral fitting