[Sat Aug  4 10:09:11 2012] Detection parameters:
  Position = (448.5, 214.0) = 8 34 54.86 55 34 20.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1728.3 +/- 51.9
  Background counts = 30.6
  Rate = 0.2 +/- 0.006

[Sat Aug  4 10:09:11 2012] Off-axis axis estimate = 12.48'
[Sat Aug  4 10:10:47 2012] Using EEF radius (= 12.67 ")to estimate initial spatial extent for simple fitting
[Sat Aug  4 10:10:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Aug  4 10:10:47 2012] Initial guess for spatial extent in simple fitting = 12.67"
[Sat Aug  4 10:10:47 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.902
[Sat Aug  4 10:10:47 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.67"
[Sat Aug  4 10:41:41 2012] fullrun_pn_xmm0143653901_pi300-10000_cl_pass0_src1.ximg exists
[Sat Aug  4 10:41:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143653901_pi300-10000_cl_pass0_src1.csv
[Sat Aug  4 10:41:41 2012] fullrun_pn_xmm0143653901_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Aug  4 10:41:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143653901_pi300-10000_cl_pass0_src1.csv
[Sat Aug  4 10:41:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0143653901_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0143653901_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 10:41:42 2012] fullrun_pn_xmm0143653901_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Aug  4 10:41:42 2012] fullrun_pn_xmm0143653901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Aug  4 10:41:42 2012] Fit fullrun_pn_xmm0143653901_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Aug  4 11:08:50 2012] Spatial fit model total counts = 3509.670000, observed total counts = 3372.000000
[Sat Aug  4 11:08:50 2012] Offset between fit and detection position for source 1 = 0.296470 pixels
[Sat Aug  4 11:08:50 2012] 3451.420000 total counts/ 1377.400000 bgd. counts: snr = 55.883410
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.296470 pixels
  Position = (448.2, 214.1) = 8 34 55.01 55 34 22.3
  Extent = 15.2 (14.4-16.1)", rotation angle = 0
  Source counts = 2074.0 +/- 58.7
  Background counts = 1377.4
  Rate = 0.3 +/- 0.008
[Sat Aug  4 11:08:50 2012] Vigneting correction estimate = 1.000000
[Sat Aug  4 11:08:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug  4 11:08:50 2012] Assessing source extent using major axis lower bound
[Sat Aug  4 11:08:50 2012] Source does appear to be extended
[Sat Aug  4 11:08:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 11:08:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug  4 11:08:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Aug  4 11:08:59 2012] Initial guess for spatial extent in simple fitting = 15.19"
[Sat Aug  4 11:08:59 2012] source mask rpix=3.5, npix_max = 63, mask sum = 64, frac = 1.004
[Sat Aug  4 11:08:59 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 15.19"
[Sat Aug  4 11:36:44 2012] fullrun_pn_xmm0143653901_pi300-10000_cl_pass1_src1.ximg exists
[Sat Aug  4 11:36:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143653901_pi300-10000_cl_pass1_src1.csv
[Sat Aug  4 11:36:44 2012] fullrun_pn_xmm0143653901_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Aug  4 11:36:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143653901_pi300-10000_cl_pass1_src1.csv
[Sat Aug  4 11:36:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0143653901_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0143653901_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 11:36:44 2012] fullrun_pn_xmm0143653901_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Aug  4 11:36:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143653901_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Aug  4 11:36:44 2012] fullrun_pn_xmm0143653901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Aug  4 11:36:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143653901_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Aug  4 11:36:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0143653901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0143653901_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 12:00:23 2012] Warning, spatial fit 1 centroid is now closest to src. 8
[Sat Aug  4 12:00:23 2012] Vigneting correction estimate = 1.000000
[Sat Aug  4 12:00:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug  4 12:00:23 2012] Assessing source extent using major axis lower bound
[Sat Aug  4 12:00:23 2012] Source does appear to be extended
[Sat Aug  4 12:00:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 12:00:31 2012] Counts = 2074.020000, rescaling region sizes by 2.000000
[Sat Aug  4 12:00:31 2012] XMMSAS src. selection expression = ellipse(38945.569240, 18574.724200, 1822.344052, 1822.344052, 0.000000, X, Y)
[Sat Aug  4 12:00:31 2012] Writing source region out to fullrun_pn_xmm0143653901_pi300-10000_pass1_cl_src1_src.reg
[Sat Aug  4 12:00:31 2012] Extracting stamp from image fullrun_pn_xmm0143653901_pi300-10000_cl_sm2.00.img.gz, (343, 109) - (553, 319)
[Sat Aug  4 12:00:31 2012] XMMSAS bgd. selection expression = annulus(38945.569240, 18574.724200, 6074.480175, 12148.960350, X, Y) && !ellipse(38768.694733, 19649.565918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39616.488068, 19609.027603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39814.784241, 18942.540909, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug  4 12:00:31 2012] Writing fullrun_pn_xmm0143653901_pi300-10000_pass1_cl_src1.gif
[Sat Aug  4 12:00:39 2012] Mean detx,y = (-9935.52, -10542.07) 
[Sat Aug  4 12:00:42 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug  4 12:04:30 2012] Binned source spectrum to 10 counts/bin
[Sat Aug  4 12:04:30 2012] Setting source spectrum file to fullrun_pn_xmm0143653901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Aug  4 12:04:30 2012] Setting bgd. spectrum file to fullrun_pn_xmm0143653901_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Aug  4 12:30:28 2012] Updating aperture counts using extracted products
[Sat Aug  4 12:30:28 2012] Error reading totcts from fullrun_pn_xmm0143653901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Aug  4 12:30:28 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 12:30:28 2012] Using photon index=1.80, rate=0.299, arf fullrun_pn_xmm0143653901_pi300-10000_pass1_cl_src1.arf
[Sat Aug  4 12:30:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 12:30:28 2012] Updating source flux to 1.8e-12
[Sat Aug  4 12:30:58 2012] Reading fit data from xmm0143653901/analysis//spectral/fullrun_pn_xmm0143653901_pi300-10000_pass1_cl_src1_pl.csv
[Sat Aug  4 12:30:58 2012] Spectral fit parameter nH value = 1.54625e+21
[Sat Aug  4 12:30:58 2012] Spectral fit parameter PhoIndex value = 2.39262
[Sat Aug  4 12:30:58 2012] Failed to get F(0.3-8.0) from xmm0143653901/analysis//spectral/fullrun_pn_xmm0143653901_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Aug  4 12:30:58 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 12:30:58 2012] Using Nh = 1.5e+21, photon index=2.39, rate=0.299, arf fullrun_pn_xmm0143653901_pi300-10000_pass1_cl_src1.arf
[Sat Aug  4 12:30:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 12:30:58 2012] Updating source flux to 1.8e-12