[Wed May 16 01:57:28 2012] Detection parameters:
  Position = (354.0, 396.2) = 15 11 29.19 57 16 45.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.7 +/- 10.9
  Background counts = 26.9
  Rate = 0.009 +/- 0.002

[Wed May 16 01:57:28 2012] Off-axis axis estimate = 8.15'
[Wed May 16 01:59:54 2012] Using EEF radius (= 10.50 ")to estimate initial spatial extent for simple fitting
[Wed May 16 01:59:54 2012] Initial guess for spatial extent in simple fitting = 10.50"
[Wed May 16 01:59:54 2012] source mask rpix=2.4, npix_max = 33, mask sum = 35, frac = 1.030
[Wed May 16 01:59:54 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.50"
[Wed May 16 02:11:24 2012] fullrun_pn_xmm0143651701_pi300-10000_cl_pass0_src2.ximg exists
[Wed May 16 02:11:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143651701_pi300-10000_cl_pass0_src2.csv
[Wed May 16 02:11:24 2012] fullrun_pn_xmm0143651701_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed May 16 02:11:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143651701_pi300-10000_cl_pass0_src2.csv
[Wed May 16 02:11:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0143651701_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0143651701_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 02:11:24 2012] fullrun_pn_xmm0143651701_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed May 16 02:11:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143651701_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed May 16 02:11:24 2012] fullrun_pn_xmm0143651701_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed May 16 02:11:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143651701_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed May 16 02:11:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0143651701_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0143651701_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 02:17:01 2012] Spatial fit model total counts = 15.116300, observed total counts = 12.000000
[Wed May 16 02:17:01 2012] Offset between fit and detection position for source 3 = 0.554657 pixels
[Wed May 16 02:17:01 2012] 15.214540 total counts/ 11.751000 bgd. counts: snr = 1.010375
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.554657 pixels
  Position = (353.5, 396.3) = 15 11 29.48 57 16 44.6
  Extent = 2.6" x 2.6", rotation angle = 0
  Source counts = 3.5 +/- 3.9
  Background counts = 11.8
  Rate = 0.004 +/- 0.005
  Deleting source due to low Poisson probability