[Mon Feb 27 12:33:43 2012] Detection parameters:
  Position = (298.0, 279.0) = 9 27 49.32 -6 7 18.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27.8 +/- 7.0
  Background counts = 6.8
  Rate = 0.002 +/- 0.0004

[Mon Feb 27 12:33:43 2012] Off-axis axis estimate = 1.41'
[Mon Feb 27 14:00:44 2012] Using EEF radius (= 7.13 ")to estimate initial spatial extent for simple fitting
[Mon Feb 27 14:00:44 2012] Initial guess for spatial extent in simple fitting = 7.13"
[Mon Feb 27 14:00:44 2012] source mask rpix=1.6, npix_max = 18, mask sum = 13, frac = 0.710
[Mon Feb 27 14:00:44 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 7.13"
[Mon Feb 27 14:57:04 2012] fullrun_mos1_xmm0143630801_pi300-10000_cl_pass0_src18.ximg exists
[Mon Feb 27 14:57:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143630801_pi300-10000_cl_pass0_src18.csv
[Mon Feb 27 14:57:04 2012] fullrun_mos1_xmm0143630801_pi300-10000_cl_pass0_src18_1.ximg exists
[Mon Feb 27 14:57:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143630801_pi300-10000_cl_pass0_src18.csv
[Mon Feb 27 14:57:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0143630801_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0143630801_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 14:57:04 2012] fullrun_mos1_xmm0143630801_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Mon Feb 27 14:57:04 2012] fullrun_mos1_xmm0143630801_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Mon Feb 27 14:57:04 2012] Fit fullrun_mos1_xmm0143630801_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Mon Feb 27 15:56:48 2012] Source 17 is offset by -6.291761 and 5.376783 pixels which is larger than
2 X fitted extent = 0.824657 x 0.824657, not incorporating fit results
[Mon Feb 27 15:56:48 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 15:56:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 15:56:48 2012] Assessing source extent using major
[Mon Feb 27 15:56:48 2012] Source does appear to be extended
[Mon Feb 27 15:56:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 17:24:05 2012] Using EEF radius (= 7.13 ")to estimate initial spatial extent for simple fitting
[Mon Feb 27 17:24:05 2012] Initial guess for spatial extent in simple fitting = 7.13"
[Mon Feb 27 17:24:05 2012] source mask rpix=1.6, npix_max = 18, mask sum = 13, frac = 0.710
[Mon Feb 27 17:24:05 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 7.13"
[Mon Feb 27 18:18:21 2012] fullrun_mos1_xmm0143630801_pi300-10000_cl_pass1_src18.ximg exists
[Mon Feb 27 18:18:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143630801_pi300-10000_cl_pass1_src18.csv
[Mon Feb 27 18:18:21 2012] fullrun_mos1_xmm0143630801_pi300-10000_cl_pass1_src18_1.ximg exists
[Mon Feb 27 18:18:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143630801_pi300-10000_cl_pass1_src18.csv
[Mon Feb 27 18:18:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0143630801_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0143630801_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 18:18:22 2012] fullrun_mos1_xmm0143630801_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Mon Feb 27 18:18:22 2012] fullrun_mos1_xmm0143630801_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Mon Feb 27 18:18:22 2012] Fit fullrun_mos1_xmm0143630801_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Mon Feb 27 19:22:02 2012] Source 17 is offset by -6.606290 and 3.755051 pixels which is larger than
2 X fitted extent = 0.820060 x 0.820060, not incorporating fit results
[Mon Feb 27 19:22:02 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 19:22:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 19:22:02 2012] Assessing source extent using major
[Mon Feb 27 19:22:02 2012] Source does appear to be extended
[Mon Feb 27 19:22:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 20:28:20 2012] XMMSAS src. selection expression = ellipse(25873.514801, 24221.744080, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Feb 27 20:28:20 2012] Writing source region out to fullrun_mos1_xmm0143630801_pi300-10000_pass1_cl_src17_src.reg
[Mon Feb 27 20:28:20 2012] Extracting stamp from image fullrun_mos1_xmm0143630801_pi300-10000_cl_sm2.00.img.gz, (260, 241) - (335, 316)
[Mon Feb 27 20:28:20 2012] XMMSAS bgd. selection expression = annulus(25873.514801, 24221.744080, 1087.500000, 2175.000000, X, Y)
[Mon Feb 27 20:28:20 2012] Writing fullrun_mos1_xmm0143630801_pi300-10000_pass1_cl_src17.gif
[Mon Feb 27 20:36:49 2012] Mean detx,y = (-2918.46, -1812.30) 
[Mon Feb 27 20:36:52 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 20:37:32 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 20:37:32 2012] Setting source spectrum file to fullrun_mos1_xmm0143630801_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon Feb 27 20:37:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0143630801_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Mon Feb 27 20:48:01 2012] Not generating rmf since there are only 27 counts
[Mon Feb 27 20:48:01 2012] rmf not generated due to insufficient counts
[Mon Feb 27 21:13:38 2012] Updating aperture counts using extracted products
[Mon Feb 27 21:13:38 2012] Error reading totcts from fullrun_mos1_xmm0143630801_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon Feb 27 21:13:39 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 21:13:39 2012] Using photon index=1.80, rate=0.00161, arf fullrun_mos1_xmm0143630801_pi300-10000_pass1_cl_src17.arf
[Mon Feb 27 21:13:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 21:13:39 2012] Updating source flux to 2.3e-14
[Mon Feb 27 21:13:43 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting