[Sat May 19 12:45:54 2012] Detection parameters:
  Position = (366.6, 198.9) = 5 12 39.13 -16 20 59.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1075.6 +/- 39.3
  Background counts = 44.4
  Rate = 0.02 +/- 0.0009

[Sat May 19 12:45:56 2012] Off-axis axis estimate = 8.74'
[Sat May 19 12:50:40 2012] Using EEF radius (= 10.80 ")to estimate initial spatial extent for simple fitting
[Sat May 19 12:50:40 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 19 12:50:40 2012] Initial guess for spatial extent in simple fitting = 10.80"
[Sat May 19 12:50:40 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.012
[Sat May 19 12:50:40 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.80"
[Sat May 19 14:29:27 2012] fullrun_pn_xmm0143370101_pi300-10000_cl_pass0_src3.ximg exists
[Sat May 19 14:29:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143370101_pi300-10000_cl_pass0_src3.csv
[Sat May 19 14:29:27 2012] fullrun_pn_xmm0143370101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat May 19 14:29:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143370101_pi300-10000_cl_pass0_src3.csv
[Sat May 19 14:29:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0143370101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0143370101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 14:29:28 2012] fullrun_pn_xmm0143370101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat May 19 14:29:28 2012] fullrun_pn_xmm0143370101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat May 19 14:29:28 2012] Fit fullrun_pn_xmm0143370101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat May 19 16:28:44 2012] Spatial fit model total counts = 1613.500000, observed total counts = 1510.000000
[Sat May 19 16:28:44 2012] Offset between fit and detection position for source 4 = 0.303051 pixels
[Sat May 19 16:28:44 2012] 1633.266000 total counts/ 568.826000 bgd. counts: snr = 44.630471
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.303051 pixels
  Position = (366.7, 199.2) = 5 12 39.11 -16 20 56.8
  Extent = 8.7 (8.2-9.2)", rotation angle = 0
  Source counts = 1064.4 +/- 40.4
  Background counts = 568.8
  Rate = 0.02 +/- 0.0009
[Sat May 19 16:28:44 2012] Vigneting correction estimate = 1.000000
[Sat May 19 16:28:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 16:28:44 2012] Assessing source extent using major axis lower bound
[Sat May 19 16:28:44 2012] Source does appear to be extended
[Sat May 19 16:28:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 16:29:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 19 16:29:13 2012] Initial guess for spatial extent in simple fitting = 8.67"
[Sat May 19 16:29:13 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.005
[Sat May 19 16:29:13 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 8.67"
[Sat May 19 17:52:37 2012] fullrun_pn_xmm0143370101_pi300-10000_cl_pass1_src3.ximg exists
[Sat May 19 17:52:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143370101_pi300-10000_cl_pass1_src3.csv
[Sat May 19 17:52:37 2012] fullrun_pn_xmm0143370101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat May 19 17:52:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143370101_pi300-10000_cl_pass1_src3.csv
[Sat May 19 17:52:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0143370101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0143370101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 17:52:37 2012] fullrun_pn_xmm0143370101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat May 19 17:52:37 2012] fullrun_pn_xmm0143370101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat May 19 17:52:37 2012] Fit fullrun_pn_xmm0143370101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat May 19 19:44:02 2012] Spatial fit model total counts = 1585.490000, observed total counts = 1468.000000
[Sat May 19 19:44:02 2012] Offset between fit and detection position for source 4 = 0.006261 pixels
[Sat May 19 19:44:02 2012] 1606.639000 total counts/ 549.469000 bgd. counts: snr = 45.099656
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.006261 pixels
  Position = (366.7, 199.2) = 5 12 39.11 -16 20 56.8
  Extent = 8.6 (8.1-9.2)", rotation angle = 0
  Source counts = 1057.2 +/- 40.1
  Background counts = 549.5
  Rate = 0.02 +/- 0.0009
[Sat May 19 19:44:02 2012] Vigneting correction estimate = 1.000000
[Sat May 19 19:44:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 19:44:02 2012] Assessing source extent using major axis lower bound
[Sat May 19 19:44:02 2012] Source does appear to be extended
[Sat May 19 19:44:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 19:44:26 2012] Counts = 1057.170000, rescaling region sizes by 2.000000
[Sat May 19 19:44:26 2012] XMMSAS src. selection expression = ellipse(31850.351000, 17283.932800, 1032.246030, 1032.246030, 0.000000, X, Y)
[Sat May 19 19:44:26 2012] Writing source region out to fullrun_pn_xmm0143370101_pi300-10000_pass1_cl_src4_src.reg
[Sat May 19 19:44:26 2012] Extracting stamp from image fullrun_pn_xmm0143370101_pi300-10000_cl_sm2.00.img.gz, (307, 140) - (426, 259)
[Sat May 19 19:44:26 2012] XMMSAS bgd. selection expression = annulus(31850.351000, 17283.932800, 3440.820099, 6881.640198, X, Y) && !ellipse(32277.833099, 19102.041794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29496.386800, 17615.555600, 486.285614, 368.819211, 0.859518, X, Y) && !ellipse(26455.027283, 13537.375183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24829.044457, 15419.936688, 1233.876270, 796.890640, 201.529777, X, Y) && !ellipse(25268.069885, 24051.211548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27347.613800, 23546.414000, 1195.424034, 1195.424034, 0.000000, X, Y) && !ellipse(31304.767517, 23642.520233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24649.965790, 22066.679367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29898.008209, 16200.731979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35615.297852, 21350.536987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37392.139038, 21172.415054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25904.315796, 21114.248672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27658.794546, 20711.646711, 1388.056040, 467.415873, 87.461303, X, Y) && !ellipse(39592.736176, 19789.870941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27790.915642, 19478.598000, 1187.856034, 1187.856034, 0.000000, X, Y) && !ellipse(27822.087800, 19069.296400, 626.380018, 626.380018, 0.000000, X, Y) && !ellipse(28069.943120, 18047.393600, 457.300813, 457.300813, 0.000000, X, Y) && !ellipse(35336.543671, 17050.969269, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 19 19:44:26 2012] Writing fullrun_pn_xmm0143370101_pi300-10000_pass1_cl_src4.gif
[Sat May 19 19:53:50 2012] Mean detx,y = (4065.44, 10644.05) 
[Sat May 19 19:53:55 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 19 19:56:27 2012] Binned source spectrum to 10 counts/bin
[Sat May 19 19:56:27 2012] Setting source spectrum file to fullrun_pn_xmm0143370101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat May 19 19:56:27 2012] Setting bgd. spectrum file to fullrun_pn_xmm0143370101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sat May 19 23:09:34 2012] Updating aperture counts using extracted products
[Sat May 19 23:09:34 2012] Error reading totcts from fullrun_pn_xmm0143370101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat May 19 23:09:35 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 19 23:09:35 2012] Using photon index=1.80, rate=0.0236, arf fullrun_pn_xmm0143370101_pi300-10000_pass1_cl_src4.arf
[Sat May 19 23:09:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 19 23:09:35 2012] Updating source flux to 1.5e-13