[Sat May 19 12:45:55 2012] Detection parameters:
  Position = (323.9, 355.1) = 5 12 52.05 -16 9 38.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.4 +/- 13.5
  Background counts = 45.9
  Rate = 0.002 +/- 0.0004

[Sat May 19 12:45:56 2012] Off-axis axis estimate = 4.50'
[Sat May 19 12:50:40 2012] Using EEF radius (= 8.68 ")to estimate initial spatial extent for simple fitting
[Sat May 19 12:50:40 2012] Initial guess for spatial extent in simple fitting = 8.68"
[Sat May 19 12:50:40 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.004
[Sat May 19 12:50:40 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 8.68"
[Sat May 19 14:29:27 2012] fullrun_pn_xmm0143370101_pi300-10000_cl_pass0_src23.ximg exists
[Sat May 19 14:29:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143370101_pi300-10000_cl_pass0_src23.csv
[Sat May 19 14:29:27 2012] fullrun_pn_xmm0143370101_pi300-10000_cl_pass0_src23_1.ximg exists
[Sat May 19 14:29:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143370101_pi300-10000_cl_pass0_src23.csv
[Sat May 19 14:29:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0143370101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0143370101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 14:29:28 2012] fullrun_pn_xmm0143370101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sat May 19 14:29:28 2012] fullrun_pn_xmm0143370101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sat May 19 14:29:28 2012] Fit fullrun_pn_xmm0143370101_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Sat May 19 16:28:44 2012] Source 24 is offset by -6.295571 and 7.073650 pixels which is larger than
2 X fitted extent = 0.997701 x 0.997701, not incorporating fit results
[Sat May 19 16:28:44 2012] Vigneting correction estimate = 1.000000
[Sat May 19 16:28:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 16:28:44 2012] Assessing source extent using major
[Sat May 19 16:28:44 2012] Source does appear to be extended
[Sat May 19 16:28:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 16:29:13 2012] Using EEF radius (= 8.68 ")to estimate initial spatial extent for simple fitting
[Sat May 19 16:29:13 2012] Initial guess for spatial extent in simple fitting = 8.68"
[Sat May 19 16:29:13 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.004
[Sat May 19 16:29:13 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 8.68"
[Sat May 19 17:52:37 2012] fullrun_pn_xmm0143370101_pi300-10000_cl_pass1_src23.ximg exists
[Sat May 19 17:52:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143370101_pi300-10000_cl_pass1_src23.csv
[Sat May 19 17:52:37 2012] fullrun_pn_xmm0143370101_pi300-10000_cl_pass1_src23_1.ximg exists
[Sat May 19 17:52:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0143370101_pi300-10000_cl_pass1_src23.csv
[Sat May 19 17:52:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0143370101_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0143370101_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 17:52:38 2012] fullrun_pn_xmm0143370101_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Sat May 19 17:52:38 2012] fullrun_pn_xmm0143370101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Sat May 19 17:52:38 2012] Fit fullrun_pn_xmm0143370101_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Sat May 19 19:44:02 2012] Spatial fit model total counts = 472.359000, observed total counts = 473.000000
[Sat May 19 19:44:02 2012] Offset between fit and detection position for source 24 = 0.213387 pixels
[Sat May 19 19:44:02 2012] 469.665700 total counts/ 407.024000 bgd. counts: snr = 3.104942
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.213387 pixels
  Position = (323.7, 355.2) = 5 12 52.10 -16 9 38.3
  Extent = 7.0 (4.8-9.5)", rotation angle = 0
  Source counts = 62.6 +/- 21.7
  Background counts = 407.0
  Rate = 0.001 +/- 0.0005
[Sat May 19 19:44:02 2012] Vigneting correction estimate = 1.000000
[Sat May 19 19:44:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 19:44:02 2012] Assessing source extent using major axis lower bound
[Sat May 19 19:44:02 2012] Source does appear to be extended
[Sat May 19 19:44:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 19:44:26 2012] XMMSAS src. selection expression = ellipse(28114.242200, 30855.127400, 417.296412, 417.296412, 0.000000, X, Y)
[Sat May 19 19:44:26 2012] Writing source region out to fullrun_pn_xmm0143370101_pi300-10000_pass1_cl_src24_src.reg
[Sat May 19 19:44:26 2012] Extracting stamp from image fullrun_pn_xmm0143370101_pi300-10000_cl_sm2.00.img.gz, (300, 331) - (348, 379)
[Sat May 19 19:44:26 2012] XMMSAS bgd. selection expression = annulus(28114.242200, 30855.127400, 695.494020, 1390.988040, X, Y) && !ellipse(28343.785919, 32839.090363, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 19 19:44:26 2012] Writing fullrun_pn_xmm0143370101_pi300-10000_pass1_cl_src24.gif
[Sat May 19 20:14:46 2012] Mean detx,y = (1609.20, -3229.68) 
[Sat May 19 20:14:49 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 19 20:15:02 2012] Binned source spectrum to 10 counts/bin
[Sat May 19 20:15:02 2012] Setting source spectrum file to fullrun_pn_xmm0143370101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sat May 19 20:15:02 2012] Setting bgd. spectrum file to fullrun_pn_xmm0143370101_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Sat May 19 21:03:59 2012] Not generating rmf since there are only 62 counts
[Sat May 19 21:03:59 2012] rmf not generated due to insufficient counts
[Sat May 19 23:09:35 2012] Updating aperture counts using extracted products
[Sat May 19 23:09:35 2012] Error reading totcts from fullrun_pn_xmm0143370101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sat May 19 23:09:35 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 19 23:09:35 2012] Using photon index=1.80, rate=0.0014, arf fullrun_pn_xmm0143370101_pi300-10000_pass1_cl_src24.arf
[Sat May 19 23:09:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 19 23:09:35 2012] Updating source flux to 5.8e-15
[Sat May 19 23:12:06 2012] Flag b found in src. 24 procflags, skipping spectral fitting
[Sat May 19 23:12:06 2012] Source 24 has fewer than 100.000000 counts, skipping spectral fitting