[Sat May 19 12:47:25 2012] Detection parameters:
  Position = (310.9, 317.9) = 5 12 55.96 -16 12 21.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6659.5 +/- 96.4
  Background counts = 14.1
  Rate = 0.1 +/- 0.002

[Sat May 19 12:47:27 2012] Off-axis axis estimate = 1.67'
[Sat May 19 15:34:16 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Sat May 19 15:34:16 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Sat May 19 15:34:16 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.849
[Sat May 19 15:34:16 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Sat May 19 16:28:27 2012] fullrun_mos2_xmm0143370101_pi300-10000_cl_pass0_src1.ximg exists
[Sat May 19 16:28:27 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0143370101_pi300-10000_cl_pass0_src1.csv
[Sat May 19 16:28:27 2012] fullrun_mos2_xmm0143370101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat May 19 16:28:27 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0143370101_pi300-10000_cl_pass0_src1.csv
[Sat May 19 16:28:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0143370101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0143370101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 16:28:28 2012] fullrun_mos2_xmm0143370101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat May 19 16:28:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143370101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat May 19 16:28:28 2012] fullrun_mos2_xmm0143370101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat May 19 16:28:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143370101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat May 19 16:28:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0143370101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0143370101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 16:29:00 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 14.942686 pixels away
[Sat May 19 16:29:00 2012] Vigneting correction estimate = 1.000000
[Sat May 19 16:29:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 16:29:00 2012] Assessing source extent using major
[Sat May 19 16:29:00 2012] Source does appear to be extended
[Sat May 19 16:29:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 18:51:28 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Sat May 19 18:51:28 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Sat May 19 18:51:28 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.849
[Sat May 19 18:51:28 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.27"
[Sat May 19 19:43:50 2012] fullrun_mos2_xmm0143370101_pi300-10000_cl_pass1_src1.ximg exists
[Sat May 19 19:43:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143370101_pi300-10000_cl_pass1_src1.csv
[Sat May 19 19:43:50 2012] fullrun_mos2_xmm0143370101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat May 19 19:43:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143370101_pi300-10000_cl_pass1_src1.csv
[Sat May 19 19:43:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0143370101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0143370101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 19:43:50 2012] fullrun_mos2_xmm0143370101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat May 19 19:43:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143370101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat May 19 19:43:50 2012] fullrun_mos2_xmm0143370101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat May 19 19:43:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0143370101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat May 19 19:43:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0143370101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0143370101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 19:44:13 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.346442 pixels away
[Sat May 19 19:44:13 2012] Vigneting correction estimate = 1.000000
[Sat May 19 19:44:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 19:44:13 2012] Assessing source extent using major
[Sat May 19 19:44:13 2012] Source does appear to be extended
[Sat May 19 19:44:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 22:26:08 2012] Counts = 6659.466309, rescaling region sizes by 2.000000
[Sat May 19 22:26:08 2012] XMMSAS src. selection expression = ellipse(27000.898651, 27604.880646, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat May 19 22:26:08 2012] Writing source region out to fullrun_mos2_xmm0143370101_pi300-10000_pass1_cl_src1_src.reg
[Sat May 19 22:26:08 2012] Extracting stamp from image fullrun_mos2_xmm0143370101_pi300-10000_cl_sm2.00.img.gz, (236, 243) - (386, 393)
[Sat May 19 22:26:08 2012] XMMSAS bgd. selection expression = annulus(27000.898651, 27604.880646, 4350.000000, 8700.000000, X, Y) && !ellipse(32243.692080, 19097.847731, 412.226412, 412.226412, 0.000000, X, Y) && !ellipse(30346.832947, 27510.427979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34249.359619, 28607.103760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27984.605809, 35891.794092, 570.259938, 321.298330, 359.341441, X, Y) && !ellipse(25805.692080, 28842.762800, 412.226412, 412.226412, 0.000000, X, Y) && !ellipse(28331.251820, 32845.904600, 353.476810, 353.476810, 0.000000, X, Y) && !ellipse(18691.604800, 23981.932400, 450.667213, 450.667213, 0.000000, X, Y) && !ellipse(31288.557800, 23652.398400, 367.195211, 367.195211, 0.000000, X, Y) && !ellipse(25884.668579, 21225.677597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25257.173645, 24052.077087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28089.996979, 18105.276093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21606.243340, 24681.777000, 259.602407, 259.602407, 0.000000, X, Y) && !ellipse(24653.558044, 22048.420731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30929.458400, 19176.256000, 869.872025, 376.434411, 20.356281, X, Y)
[Sat May 19 22:26:08 2012] Writing fullrun_mos2_xmm0143370101_pi300-10000_pass1_cl_src1.gif
[Sat May 19 22:26:13 2012] Mean detx,y = (6.91, -116.84) 
[Sat May 19 22:26:15 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 19 22:29:56 2012] Binned source spectrum to 10 counts/bin
[Sat May 19 22:29:56 2012] Setting source spectrum file to fullrun_mos2_xmm0143370101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat May 19 22:29:56 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0143370101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat May 19 22:38:54 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 19 22:38:54 2012] rmf not generated due to insufficient counts
[Sat May 19 23:09:37 2012] Updating aperture counts using extracted products
[Sat May 19 23:09:37 2012] Error reading totcts from fullrun_mos2_xmm0143370101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat May 19 23:09:37 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 19 23:09:37 2012] Using photon index=1.80, rate=0.147, arf fullrun_mos2_xmm0143370101_pi300-10000_pass1_cl_src1.arf
[Sat May 19 23:09:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 19 23:09:37 2012] Updating source flux to 1.7e-12
[Sat May 19 23:11:20 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 19 23:12:06 2012] xmm0143370101/analysis//spectral/fullrun_mos2_xmm0143370101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete