[Sat May 19 12:46:43 2012] Detection parameters:
  Position = (393.6, 332.8) = 5 12 31.00 -16 11 16.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1050.3 +/- 38.6
  Background counts = 13.3
  Rate = 0.03 +/- 0.001

[Sat May 19 12:46:45 2012] Off-axis axis estimate = 7.33'
[Sat May 19 14:29:28 2012] Using EEF radius (= 10.10 ")to estimate initial spatial extent for simple fitting
[Sat May 19 14:29:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 19 14:29:28 2012] Initial guess for spatial extent in simple fitting = 10.10"
[Sat May 19 14:29:28 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.942
[Sat May 19 14:29:28 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.10"
[Sat May 19 15:34:15 2012] fullrun_mos1_xmm0143370101_pi300-10000_cl_pass0_src2.ximg exists
[Sat May 19 15:34:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143370101_pi300-10000_cl_pass0_src2.csv
[Sat May 19 15:34:15 2012] fullrun_mos1_xmm0143370101_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat May 19 15:34:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143370101_pi300-10000_cl_pass0_src2.csv
[Sat May 19 15:34:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0143370101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0143370101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 15:34:16 2012] fullrun_mos1_xmm0143370101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat May 19 15:34:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143370101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat May 19 15:34:16 2012] fullrun_mos1_xmm0143370101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat May 19 15:34:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143370101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat May 19 15:34:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0143370101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0143370101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 16:28:52 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 12.858659 pixels away
[Sat May 19 16:28:52 2012] Vigneting correction estimate = 1.000000
[Sat May 19 16:28:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 16:28:52 2012] Assessing source extent using major
[Sat May 19 16:28:52 2012] Source does appear to be extended
[Sat May 19 16:28:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 17:52:38 2012] Using EEF radius (= 10.10 ")to estimate initial spatial extent for simple fitting
[Sat May 19 17:52:38 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 19 17:52:38 2012] Initial guess for spatial extent in simple fitting = 10.10"
[Sat May 19 17:52:38 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.942
[Sat May 19 17:52:38 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 10.10"
[Sat May 19 18:51:27 2012] fullrun_mos1_xmm0143370101_pi300-10000_cl_pass1_src2.ximg exists
[Sat May 19 18:51:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143370101_pi300-10000_cl_pass1_src2.csv
[Sat May 19 18:51:27 2012] fullrun_mos1_xmm0143370101_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat May 19 18:51:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143370101_pi300-10000_cl_pass1_src2.csv
[Sat May 19 18:51:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0143370101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0143370101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 18:51:27 2012] fullrun_mos1_xmm0143370101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat May 19 18:51:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143370101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat May 19 18:51:27 2012] fullrun_mos1_xmm0143370101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat May 19 18:51:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143370101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat May 19 18:51:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0143370101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0143370101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 19:44:08 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 12.858659 pixels away
[Sat May 19 19:44:08 2012] Vigneting correction estimate = 1.000000
[Sat May 19 19:44:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 19:44:08 2012] Assessing source extent using major
[Sat May 19 19:44:08 2012] Source does appear to be extended
[Sat May 19 19:44:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 21:29:48 2012] Counts = 1050.310059, rescaling region sizes by 2.000000
[Sat May 19 21:29:48 2012] XMMSAS src. selection expression = ellipse(34193.728790, 28905.996338, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat May 19 21:29:48 2012] Writing source region out to fullrun_mos1_xmm0143370101_pi300-10000_pass1_cl_src2_src.reg
[Sat May 19 21:29:48 2012] Extracting stamp from image fullrun_mos1_xmm0143370101_pi300-10000_cl_sm2.00.img.gz, (319, 258) - (469, 408)
[Sat May 19 21:29:48 2012] XMMSAS bgd. selection expression = annulus(34193.728790, 28905.996338, 4350.000000, 8700.000000, X, Y) && !ellipse(26987.667400, 27597.627240, 445.418413, 445.418413, 0.000000, X, Y) && !ellipse(27963.217400, 35866.945140, 481.594414, 481.594414, 0.000000, X, Y) && !ellipse(30350.189600, 27491.722400, 395.583211, 395.583211, 0.000000, X, Y) && !ellipse(25812.679600, 28850.844400, 365.804011, 365.804011, 0.000000, X, Y) && !ellipse(28351.303800, 32843.984600, 436.805613, 436.805613, 0.000000, X, Y) && !ellipse(25873.039600, 21107.043600, 383.027211, 287.812008, 211.740000, X, Y) && !ellipse(31308.116200, 23636.115800, 453.555213, 453.555213, 0.000000, X, Y) && !ellipse(25266.262640, 24078.008800, 268.512866, 268.512866, 0.000000, X, Y) && !ellipse(41548.478546, 23963.417694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39144.456648, 27921.430386, 549.779216, 549.779216, 0.000000, X, Y) && !ellipse(24271.026000, 37280.533400, 1775.136051, 1775.136051, 0.000000, X, Y) && !ellipse(37374.627395, 21134.755058, 1285.325748, 436.540095, 316.657820, X, Y) && !ellipse(40639.586440, 29198.639400, 331.461610, 331.461610, 0.000000, X, Y) && !ellipse(24678.417400, 22090.951600, 1683.080048, 1683.080048, 0.000000, X, Y) && !ellipse(40543.616333, 37169.828125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28244.323400, 30939.073000, 648.699219, 648.699219, 0.000000, X, Y)
[Sat May 19 21:29:48 2012] Writing fullrun_mos1_xmm0143370101_pi300-10000_pass1_cl_src2.gif
[Sat May 19 21:30:15 2012] Mean detx,y = (792.41, 7137.06) 
[Sat May 19 21:30:16 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 19 21:32:28 2012] Binned source spectrum to 10 counts/bin
[Sat May 19 21:32:28 2012] Setting source spectrum file to fullrun_mos1_xmm0143370101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat May 19 21:32:28 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0143370101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat May 19 21:49:58 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 19 21:49:58 2012] rmf not generated due to insufficient counts
[Sat May 19 23:09:36 2012] Updating aperture counts using extracted products
[Sat May 19 23:09:36 2012] Error reading totcts from fullrun_mos1_xmm0143370101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat May 19 23:09:36 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 19 23:09:36 2012] Using photon index=1.80, rate=0.0289, arf fullrun_mos1_xmm0143370101_pi300-10000_pass1_cl_src2.arf
[Sat May 19 23:09:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 19 23:09:36 2012] Updating source flux to 3.9e-13
[Sat May 19 23:09:39 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting