[Mon Dec 26 12:40:44 2011] Detection parameters:
  Position = (470.3, 354.1) = 22 2 54.17 -64 40 44.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2668.2 +/- 61.6
  Background counts = 5.6
  Rate = 0.1 +/- 0.003

[Mon Dec 26 12:40:45 2011] Off-axis axis estimate = 13.10'
[Mon Dec 26 15:24:26 2011] Using EEF radius (= 12.98 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 15:24:26 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Dec 26 15:24:26 2011] Initial guess for spatial extent in simple fitting = 12.98"
[Mon Dec 26 15:24:26 2011] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.010
[Mon Dec 26 15:24:26 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 12.98"
[Mon Dec 26 16:35:18 2011] fullrun_mos1_xmm0143250101_pi300-10000_cl_pass0_src1.ximg exists
[Mon Dec 26 16:35:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143250101_pi300-10000_cl_pass0_src1.csv
[Mon Dec 26 16:35:18 2011] fullrun_mos1_xmm0143250101_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Dec 26 16:35:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143250101_pi300-10000_cl_pass0_src1.csv
[Mon Dec 26 16:35:18 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0143250101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0143250101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 16:35:19 2011] fullrun_mos1_xmm0143250101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Dec 26 16:35:19 2011] fullrun_mos1_xmm0143250101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Dec 26 16:35:19 2011] Fit fullrun_mos1_xmm0143250101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Dec 26 18:13:11 2011] Spatial fit model total counts = 2595.010000, observed total counts = 2599.000000
[Mon Dec 26 18:13:11 2011] Offset between fit and detection position for source 4 = 0.241748 pixels
[Mon Dec 26 18:13:11 2011] 2588.661000 total counts/ 556.801000 bgd. counts: snr = 86.108055
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.241748 pixels
  Position = (470.1, 354.2) = 22 2 54.33 -64 40 45.5
  Extent = 6.9 (6.7-7.2)", rotation angle = 0
  Source counts = 2031.9 +/- 50.9
  Background counts = 556.8
  Rate = 0.09 +/- 0.002
[Mon Dec 26 18:13:11 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 18:13:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 18:13:11 2011] Assessing source extent using major axis lower bound
[Mon Dec 26 18:13:11 2011] Source does appear to be extended
[Mon Dec 26 18:13:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 26 20:31:24 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Dec 26 20:31:24 2011] Initial guess for spatial extent in simple fitting = 6.94"
[Mon Dec 26 20:31:24 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.910
[Mon Dec 26 20:31:24 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 6.94"
[Mon Dec 26 21:33:42 2011] fullrun_mos1_xmm0143250101_pi300-10000_cl_pass1_src1.ximg exists
[Mon Dec 26 21:33:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143250101_pi300-10000_cl_pass1_src1.csv
[Mon Dec 26 21:33:42 2011] fullrun_mos1_xmm0143250101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Dec 26 21:33:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143250101_pi300-10000_cl_pass1_src1.csv
[Mon Dec 26 21:33:42 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0143250101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0143250101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 21:33:43 2011] fullrun_mos1_xmm0143250101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Dec 26 21:33:43 2011] fullrun_mos1_xmm0143250101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Dec 26 21:33:43 2011] Fit fullrun_mos1_xmm0143250101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Dec 26 23:19:32 2011] Spatial fit model total counts = 2404.100000, observed total counts = 2414.000000
[Mon Dec 26 23:19:32 2011] Offset between fit and detection position for source 4 = 0.040981 pixels
[Mon Dec 26 23:19:32 2011] 2389.476000 total counts/ 538.406000 bgd. counts: snr = 79.775199
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.040981 pixels
  Position = (470.1, 354.2) = 22 2 54.31 -64 40 45.5
  Extent = 6.1 (5.8-6.3)", rotation angle = 0
  Source counts = 1851.1 +/- 48.9
  Background counts = 538.4
  Rate = 0.08 +/- 0.002
[Mon Dec 26 23:19:32 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 23:19:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 23:19:32 2011] Assessing source extent using major axis lower bound
[Mon Dec 26 23:19:32 2011] Source does appear to be extended
[Mon Dec 26 23:19:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 01:45:21 2011] Counts = 1851.070000, rescaling region sizes by 2.000000
[Tue Dec 27 01:45:21 2011] XMMSAS src. selection expression = ellipse(40851.943700, 30763.705600, 728.462421, 728.462421, 0.000000, X, Y)
[Tue Dec 27 01:45:21 2011] Writing source region out to fullrun_mos1_xmm0143250101_pi300-10000_pass1_cl_src4_src.reg
[Tue Dec 27 01:45:21 2011] Extracting stamp from image fullrun_mos1_xmm0143250101_pi300-10000_cl_sm2.00.img.gz, (428, 312) - (512, 396)
[Tue Dec 27 01:45:21 2011] XMMSAS bgd. selection expression = annulus(40851.943700, 30763.705600, 2428.208070, 4856.416140, X, Y) && !ellipse(36828.978056, 29708.213703, 447.938613, 325.805303, 23.650444, X, Y) && !ellipse(39449.155200, 32149.392200, 298.616809, 298.616809, 0.000000, X, Y) && !ellipse(35858.240997, 31302.547913, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Dec 27 01:45:21 2011] Writing fullrun_mos1_xmm0143250101_pi300-10000_pass1_cl_src4.gif
[Tue Dec 27 01:45:27 2011] Mean detx,y = (7484.52, 11563.18) 
[Tue Dec 27 01:45:31 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 27 01:47:03 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 27 01:47:03 2011] Setting source spectrum file to fullrun_mos1_xmm0143250101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Dec 27 01:47:03 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0143250101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue Dec 27 03:35:48 2011] Updating aperture counts using extracted products
[Tue Dec 27 03:35:48 2011] Error reading totcts from fullrun_mos1_xmm0143250101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Dec 27 03:35:51 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 03:35:51 2011] Using photon index=1.80, rate=0.0847, arf fullrun_mos1_xmm0143250101_pi300-10000_pass1_cl_src4.arf
[Tue Dec 27 03:35:51 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 03:35:51 2011] Updating source flux to 1.6e-12
[Tue Dec 27 03:37:00 2011] Reading fit data from xmm0143250101/analysis//spectral/fullrun_mos1_xmm0143250101_pi300-10000_pass1_cl_src4_pl.csv
[Tue Dec 27 03:37:00 2011] Spectral fit parameter nH value = 2.52702e+21
[Tue Dec 27 03:37:00 2011] Spectral fit parameter PhoIndex value = 3.97063
[Tue Dec 27 03:37:00 2011] Failed to get F(0.3-8.0) from xmm0143250101/analysis//spectral/fullrun_mos1_xmm0143250101_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Tue Dec 27 03:37:00 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 03:37:00 2011] Using Nh = 2.5e+21, photon index=3.97, rate=0.0847, arf fullrun_mos1_xmm0143250101_pi300-10000_pass1_cl_src4.arf
[Tue Dec 27 03:37:00 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 03:37:00 2011] Updating source flux to 1e-12