[Thu May 31 10:13:39 2012] Detection parameters:
  Position = (308.4, 357.9) = 13 43 2.64 -67 21 23.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.9 +/- 15.3
  Background counts = 22.4
  Rate = 0.009 +/- 0.001

[Thu May 31 10:13:39 2012] Off-axis axis estimate = 4.37'
[Thu May 31 10:25:04 2012] Using EEF radius (= 8.61 ")to estimate initial spatial extent for simple fitting
[Thu May 31 10:25:04 2012] Initial guess for spatial extent in simple fitting = 8.61"
[Thu May 31 10:25:04 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.016
[Thu May 31 10:25:04 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.61"
[Thu May 31 10:36:02 2012] fullrun_mos1_xmm0143200301_pi300-10000_cl_pass0_src1.ximg exists
[Thu May 31 10:36:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143200301_pi300-10000_cl_pass0_src1.csv
[Thu May 31 10:36:02 2012] fullrun_mos1_xmm0143200301_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu May 31 10:36:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143200301_pi300-10000_cl_pass0_src1.csv
[Thu May 31 10:36:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0143200301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0143200301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 10:36:02 2012] fullrun_mos1_xmm0143200301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu May 31 10:36:02 2012] fullrun_mos1_xmm0143200301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May 31 10:36:02 2012] Fit fullrun_mos1_xmm0143200301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu May 31 10:43:56 2012] Spatial fit model total counts = 349.812000, observed total counts = 350.000000
[Thu May 31 10:43:56 2012] Offset between fit and detection position for source 4 = 0.126715 pixels
[Thu May 31 10:43:56 2012] 355.214000 total counts/ 277.039000 bgd. counts: snr = 4.696750
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.126715 pixels
  Position = (308.4, 357.7) = 13 43 2.68 -67 21 23.1
  Extent = 4.9 (4.0-6.1)", rotation angle = 0
  Source counts = 78.2 +/- 18.8
  Background counts = 277.0
  Rate = 0.005 +/- 0.001
[Thu May 31 10:43:56 2012] Vigneting correction estimate = 1.000000
[Thu May 31 10:43:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 10:43:56 2012] Assessing source extent using major axis lower bound
[Thu May 31 10:43:56 2012] Source does appear to be extended
[Thu May 31 10:43:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 10:52:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 31 10:52:42 2012] Initial guess for spatial extent in simple fitting = 4.89"
[Thu May 31 10:52:42 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.853
[Thu May 31 10:52:42 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.89"
[Thu May 31 11:03:31 2012] fullrun_mos1_xmm0143200301_pi300-10000_cl_pass1_src1.ximg exists
[Thu May 31 11:03:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143200301_pi300-10000_cl_pass1_src1.csv
[Thu May 31 11:03:31 2012] fullrun_mos1_xmm0143200301_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May 31 11:03:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0143200301_pi300-10000_cl_pass1_src1.csv
[Thu May 31 11:03:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0143200301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0143200301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 11:03:31 2012] fullrun_mos1_xmm0143200301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May 31 11:03:31 2012] fullrun_mos1_xmm0143200301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May 31 11:03:31 2012] Fit fullrun_mos1_xmm0143200301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu May 31 11:16:34 2012] Spatial fit model total counts = 354.655000, observed total counts = 355.000000
[Thu May 31 11:16:34 2012] Offset between fit and detection position for source 4 = 0.004105 pixels
[Thu May 31 11:16:34 2012] 359.830600 total counts/ 281.695000 bgd. counts: snr = 4.655426
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.004105 pixels
  Position = (308.4, 357.7) = 13 43 2.68 -67 21 23.1
  Extent = 4.9 (4.0-6.1)", rotation angle = 0
  Source counts = 78.1 +/- 19.0
  Background counts = 281.7
  Rate = 0.005 +/- 0.001
[Thu May 31 11:16:34 2012] Vigneting correction estimate = 1.000000
[Thu May 31 11:16:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 11:16:34 2012] Assessing source extent using major axis lower bound
[Thu May 31 11:16:34 2012] Source does appear to be extended
[Thu May 31 11:16:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 11:26:23 2012] XMMSAS src. selection expression = ellipse(26778.057200, 31075.155200, 294.871208, 294.871208, 0.000000, X, Y)
[Thu May 31 11:26:23 2012] Writing source region out to fullrun_mos1_xmm0143200301_pi300-10000_pass1_cl_src4_src.reg
[Thu May 31 11:26:23 2012] Extracting stamp from image fullrun_mos1_xmm0143200301_pi300-10000_cl_sm2.00.img.gz, (291, 341) - (325, 375)
[Thu May 31 11:26:24 2012] XMMSAS bgd. selection expression = annulus(26778.057200, 31075.155200, 491.452014, 982.904028, X, Y)
[Thu May 31 11:26:24 2012] Writing fullrun_mos1_xmm0143200301_pi300-10000_pass1_cl_src4.gif
[Thu May 31 11:26:28 2012] Mean detx,y = (903.06, 3324.84) 
[Thu May 31 11:26:30 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 11:26:41 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 11:26:42 2012] Setting source spectrum file to fullrun_mos1_xmm0143200301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu May 31 11:26:42 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0143200301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu May 31 11:29:16 2012] Not generating rmf since there are only 78 counts
[Thu May 31 11:29:16 2012] rmf not generated due to insufficient counts
[Thu May 31 11:33:45 2012] Updating aperture counts using extracted products
[Thu May 31 11:33:45 2012] Error reading totcts from fullrun_mos1_xmm0143200301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu May 31 11:33:45 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 11:33:45 2012] Using photon index=1.80, rate=0.00515, arf fullrun_mos1_xmm0143200301_pi300-10000_pass1_cl_src4.arf
[Thu May 31 11:33:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 11:33:45 2012] Updating source flux to 6.6e-14
[Thu May 31 11:33:47 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May 31 11:33:48 2012] xmm0143200301/analysis//spectral/fullrun_mos1_xmm0143200301_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete