[Sat Jun 23 12:56:12 2012] Detection parameters:
  Position = (347.4, 375.4) = 5 50 21.07 -32 9 6.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.4 +/- 17.6
  Background counts = 129.7
  Rate = 0.002 +/- 0.0004

[Sat Jun 23 12:56:13 2012] Off-axis axis estimate = 6.61'
[Sat Jun 23 13:03:46 2012] Using EEF radius (= 9.74 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 13:03:46 2012] Initial guess for spatial extent in simple fitting = 9.74"
[Sat Jun 23 13:03:46 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.834
[Sat Jun 23 13:03:46 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 9.74"
[Sat Jun 23 15:24:34 2012] fullrun_pn_xmm0142270101_pi300-10000_cl_pass0_src6.ximg exists
[Sat Jun 23 15:24:34 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0142270101_pi300-10000_cl_pass0_src6.csv
[Sat Jun 23 15:24:34 2012] fullrun_pn_xmm0142270101_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat Jun 23 15:24:34 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0142270101_pi300-10000_cl_pass0_src6.csv
[Sat Jun 23 15:24:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0142270101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0142270101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 15:24:35 2012] fullrun_pn_xmm0142270101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat Jun 23 15:24:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0142270101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat Jun 23 15:24:35 2012] fullrun_pn_xmm0142270101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Jun 23 15:24:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0142270101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat Jun 23 15:24:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0142270101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0142270101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 17:19:34 2012] Source 6 is offset by 7.104999 and 6.067584 pixels which is larger than
2 X fitted extent = 6.675586 x 6.675586, not incorporating fit results
[Sat Jun 23 17:19:34 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 17:19:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 17:19:34 2012] Assessing source extent using major
[Sat Jun 23 17:19:34 2012] Source does appear to be extended
[Sat Jun 23 17:19:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 17:19:34 2012] Deleting source due to low Poisson probability 0.9