[Sat Jun 23 12:56:12 2012] Detection parameters:
  Position = (434.9, 262.9) = 5 49 51.03 -32 17 17.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 926.0 +/- 39.7
  Background counts = 97.2
  Rate = 0.01 +/- 0.0004

[Sat Jun 23 12:56:13 2012] Off-axis axis estimate = 10.22'
[Sat Jun 23 13:03:46 2012] Using EEF radius (= 11.54 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 13:03:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 23 13:03:46 2012] Initial guess for spatial extent in simple fitting = 11.54"
[Sat Jun 23 13:03:46 2012] source mask rpix=2.7, npix_max = 39, mask sum = 36, frac = 0.905
[Sat Jun 23 13:03:46 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.54"
[Sat Jun 23 15:24:34 2012] fullrun_pn_xmm0142270101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun 23 15:24:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0142270101_pi300-10000_cl_pass0_src1.csv
[Sat Jun 23 15:24:34 2012] fullrun_pn_xmm0142270101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun 23 15:24:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0142270101_pi300-10000_cl_pass0_src1.csv
[Sat Jun 23 15:24:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0142270101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0142270101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 15:24:35 2012] fullrun_pn_xmm0142270101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun 23 15:24:35 2012] fullrun_pn_xmm0142270101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun 23 15:24:35 2012] Fit fullrun_pn_xmm0142270101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jun 23 17:19:34 2012] Spatial fit model total counts = 2419.410000, observed total counts = 2213.000000
[Sat Jun 23 17:19:34 2012] Offset between fit and detection position for source 1 = 0.216421 pixels
[Sat Jun 23 17:19:34 2012] 2418.972000 total counts/ 1792.910000 bgd. counts: snr = 14.785571
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.216421 pixels
  Position = (434.7, 262.9) = 5 49 51.11 -32 17 16.2
  Extent = 6.2 (5.7-6.8)", rotation angle = 0
  Source counts = 626.1 +/- 49.2
  Background counts = 1792.9
  Rate = 0.007 +/- 0.0006
[Sat Jun 23 17:19:34 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 17:19:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 17:19:34 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 17:19:34 2012] Source does appear to be extended
[Sat Jun 23 17:19:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 17:19:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 23 17:19:59 2012] Initial guess for spatial extent in simple fitting = 6.17"
[Sat Jun 23 17:19:59 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.087
[Sat Jun 23 17:19:59 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.17"
[Sat Jun 23 21:36:32 2012] fullrun_pn_xmm0142270101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun 23 21:36:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0142270101_pi300-10000_cl_pass1_src1.csv
[Sat Jun 23 21:36:32 2012] fullrun_pn_xmm0142270101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun 23 21:36:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0142270101_pi300-10000_cl_pass1_src1.csv
[Sat Jun 23 21:36:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0142270101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0142270101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 21:36:32 2012] fullrun_pn_xmm0142270101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun 23 21:36:32 2012] fullrun_pn_xmm0142270101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun 23 21:36:32 2012] Fit fullrun_pn_xmm0142270101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jun 23 23:12:33 2012] Spatial fit model total counts = 1743.690000, observed total counts = 1690.000000
[Sat Jun 23 23:12:33 2012] Offset between fit and detection position for source 1 = 0.006552 pixels
[Sat Jun 23 23:12:33 2012] 1739.580000 total counts/ 1139.960000 bgd. counts: snr = 17.759523
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.006552 pixels
  Position = (434.7, 262.9) = 5 49 51.10 -32 17 16.2
  Extent = 6.0 (5.5-6.5)", rotation angle = 0
  Source counts = 599.6 +/- 41.7
  Background counts = 1140.0
  Rate = 0.007 +/- 0.0005
[Sat Jun 23 23:12:33 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 23:12:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 23:12:33 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 23:12:33 2012] Source does appear to be extended
[Sat Jun 23 23:12:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 23:12:56 2012] XMMSAS src. selection expression = ellipse(37770.659000, 22820.961800, 358.152010, 358.152010, 0.000000, X, Y)
[Sat Jun 23 23:12:56 2012] Writing source region out to fullrun_pn_xmm0142270101_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun 23 23:12:56 2012] Extracting stamp from image fullrun_pn_xmm0142270101_pi300-10000_cl_sm2.00.img.gz, (414, 242) - (455, 283)
[Sat Jun 23 23:12:56 2012] XMMSAS bgd. selection expression = annulus(37770.659000, 22820.961800, 596.920017, 1193.840034, X, Y)
[Sat Jun 23 23:12:56 2012] Writing fullrun_pn_xmm0142270101_pi300-10000_pass1_cl_src1.gif
[Sat Jun 23 23:13:41 2012] Mean detx,y = (-11510.60, -4925.03) 
[Sat Jun 23 23:13:46 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 23 23:13:59 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 23 23:13:59 2012] Setting source spectrum file to fullrun_pn_xmm0142270101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 23 23:13:59 2012] Setting bgd. spectrum file to fullrun_pn_xmm0142270101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jun 24 08:41:32 2012] Updating aperture counts using extracted products
[Sun Jun 24 08:41:32 2012] Error reading totcts from fullrun_pn_xmm0142270101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 24 08:41:33 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 08:41:33 2012] Using photon index=1.80, rate=0.00709, arf fullrun_pn_xmm0142270101_pi300-10000_pass1_cl_src1.arf
[Sun Jun 24 08:41:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 08:41:33 2012] Updating source flux to 5.1e-14
[Sun Jun 24 08:46:23 2012] Reading fit data from xmm0142270101/analysis//spectral/fullrun_pn_xmm0142270101_pi300-10000_pass1_cl_src1_pl.csv
[Sun Jun 24 08:46:23 2012] Spectral fit parameter nH value = 1.71917e+20
[Sun Jun 24 08:46:23 2012] Spectral fit parameter PhoIndex value = 1.62565
[Sun Jun 24 08:46:23 2012] Failed to get F(0.3-8.0) from xmm0142270101/analysis//spectral/fullrun_pn_xmm0142270101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Jun 24 08:46:23 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 08:46:23 2012] Using Nh = 1.7e+20, photon index=1.63, rate=0.00709, arf fullrun_pn_xmm0142270101_pi300-10000_pass1_cl_src1.arf
[Sun Jun 24 08:46:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 08:46:23 2012] Updating source flux to 6e-14