[Sun Aug  5 10:13:23 2012] Detection parameters:
  Position = (373.9, 368.7) = 4 48 15.61 -20 31 38.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 711.6 +/- 33.0
  Background counts = 21.0
  Rate = 0.07 +/- 0.003

[Sun Aug  5 10:13:23 2012] Off-axis axis estimate = 7.48'
[Sun Aug  5 10:51:50 2012] Using EEF radius (= 10.17 ")to estimate initial spatial extent for simple fitting
[Sun Aug  5 10:51:50 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug  5 10:51:50 2012] Initial guess for spatial extent in simple fitting = 10.17"
[Sun Aug  5 10:51:50 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.118
[Sun Aug  5 10:51:50 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.17"
[Sun Aug  5 11:07:54 2012] fullrun_mos2_xmm0142240201_pi300-10000_cl_pass0_src1.ximg exists
[Sun Aug  5 11:07:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0142240201_pi300-10000_cl_pass0_src1.csv
[Sun Aug  5 11:07:54 2012] fullrun_mos2_xmm0142240201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Aug  5 11:07:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0142240201_pi300-10000_cl_pass0_src1.csv
[Sun Aug  5 11:07:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0142240201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0142240201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 11:07:55 2012] fullrun_mos2_xmm0142240201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Aug  5 11:07:55 2012] fullrun_mos2_xmm0142240201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Aug  5 11:07:55 2012] Fit fullrun_mos2_xmm0142240201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Aug  5 11:08:02 2012] Spatial fit model total counts = 895.997000, observed total counts = 896.000000
[Sun Aug  5 11:08:02 2012] Offset between fit and detection position for source 1 = 0.281983 pixels
[Sun Aug  5 11:08:02 2012] 890.966000 total counts/ 405.344000 bgd. counts: snr = 24.120510
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.281983 pixels
  Position = (373.7, 368.5) = 4 48 15.68 -20 31 38.7
  Extent = 5.1 (4.6-5.5)", rotation angle = 0
  Source counts = 485.6 +/- 29.8
  Background counts = 405.3
  Rate = 0.03 +/- 0.002
[Sun Aug  5 11:08:02 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 11:08:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 11:08:02 2012] Assessing source extent using major axis lower bound
[Sun Aug  5 11:08:02 2012] Source does appear to be extended
[Sun Aug  5 11:08:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 11:39:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug  5 11:39:34 2012] Initial guess for spatial extent in simple fitting = 5.07"
[Sun Aug  5 11:39:34 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.810
[Sun Aug  5 11:39:34 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.07"
[Sun Aug  5 11:54:37 2012] fullrun_mos2_xmm0142240201_pi300-10000_cl_pass1_src1.ximg exists
[Sun Aug  5 11:54:37 2012] fullrun_mos2_xmm0142240201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Aug  5 11:54:37 2012] Fit fullrun_mos2_xmm0142240201_pi300-10000_cl_pass1_src1 appears to have run properly
[Sun Aug  5 11:54:37 2012] fullrun_mos2_xmm0142240201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Aug  5 11:54:37 2012] fullrun_mos2_xmm0142240201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Aug  5 11:54:37 2012] Fit fullrun_mos2_xmm0142240201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Aug  5 11:54:44 2012] Spatial fit model total counts = 813.902000, observed total counts = 814.000000
[Sun Aug  5 11:54:44 2012] Offset between fit and detection position for source 1 = 0.055233 pixels
[Sun Aug  5 11:54:44 2012] 807.989000 total counts/ 326.656000 bgd. counts: snr = 26.631788
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.055233 pixels
  Position = (373.7, 368.5) = 4 48 15.67 -20 31 38.9
  Extent = 6.0 (5.4-6.7)" x 4.0 (4.0-4.0)", rotation angle = 30 (20-39) degrees
  Source counts = 481.3 +/- 28.4
  Background counts = 326.7
  Rate = 0.03 +/- 0.002
[Sun Aug  5 11:54:44 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 11:54:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 11:54:44 2012] Assessing source extent using major axis lower bound
[Sun Aug  5 11:54:44 2012] Source does appear to be extended
[Sun Aug  5 11:54:44 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.36
[Sun Aug  5 12:23:43 2012] XMMSAS src. selection expression = ellipse(32465.332200, 32009.983600, 362.403610, 238.223407, 30.174656, X, Y)
[Sun Aug  5 12:23:43 2012] Writing source region out to fullrun_mos2_xmm0142240201_pi300-10000_pass1_cl_src1_src.reg
[Sun Aug  5 12:23:43 2012] Extracting stamp from image fullrun_mos2_xmm0142240201_pi300-10000_cl_sm2.00.img.gz, (353, 348) - (395, 389)
[Sun Aug  5 12:23:43 2012] XMMSAS bgd. selection expression = annulus(32465.332200, 32009.983600, 604.006017, 1208.012035, X, Y) && !ellipse(33995.079498, 33130.596649, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug  5 12:23:43 2012] Writing fullrun_mos2_xmm0142240201_pi300-10000_pass1_cl_src1.gif
[Sun Aug  5 12:23:45 2012] Mean detx,y = (-5638.74, 4141.29) 
[Sun Aug  5 12:23:46 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug  5 12:23:57 2012] Binned source spectrum to 10 counts/bin
[Sun Aug  5 12:23:57 2012] Setting source spectrum file to fullrun_mos2_xmm0142240201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Aug  5 12:23:57 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0142240201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Aug  5 12:39:27 2012] Updating aperture counts using extracted products
[Sun Aug  5 12:39:27 2012] Error reading totcts from fullrun_mos2_xmm0142240201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Aug  5 12:39:27 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug  5 12:39:27 2012] Using photon index=1.80, rate=0.0327, arf fullrun_mos2_xmm0142240201_pi300-10000_pass1_cl_src1.arf
[Sun Aug  5 12:39:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug  5 12:39:27 2012] Updating source flux to 6.3e-13
[Sun Aug  5 12:39:52 2012] Reading fit data from xmm0142240201/analysis//spectral/fullrun_mos2_xmm0142240201_pi300-10000_pass1_cl_src1_pl.csv
[Sun Aug  5 12:39:52 2012] Spectral fit parameter nH value = 7.54305e+14
[Sun Aug  5 12:39:52 2012] Spectral fit parameter PhoIndex value = 1.77469
[Sun Aug  5 12:39:52 2012] Failed to get F(0.3-8.0) from xmm0142240201/analysis//spectral/fullrun_mos2_xmm0142240201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Aug  5 12:39:52 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug  5 12:39:52 2012] Using Nh = 7.5e+14, photon index=1.77, rate=0.0327, arf fullrun_mos2_xmm0142240201_pi300-10000_pass1_cl_src1.arf
[Sun Aug  5 12:39:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug  5 12:39:52 2012] Updating source flux to 6.4e-13