[Tue Mar 20 13:39:21 2012] Detection parameters:
  Position = (190.2, 247.9) = 1 33 34.15 30 32 12.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1987.0 +/- 52.5
  Background counts = 14.3
  Rate = 0.2 +/- 0.004

[Tue Mar 20 13:39:25 2012] Off-axis axis estimate = 8.66'
[Tue Mar 20 13:41:30 2012] Using EEF radius (= 10.76 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 13:41:30 2012] Initial guess for spatial extent in simple fitting = 10.76"
[Tue Mar 20 13:41:30 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.018
[Tue Mar 20 13:41:30 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.76"
[Tue Mar 20 15:57:56 2012] fullrun_pn_xmm0141980601_pi300-10000_cl_pass0_src3.ximg exists
[Tue Mar 20 15:57:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0141980601_pi300-10000_cl_pass0_src3.csv
[Tue Mar 20 15:57:56 2012] fullrun_pn_xmm0141980601_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Mar 20 15:57:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0141980601_pi300-10000_cl_pass0_src3.csv
[Tue Mar 20 15:57:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0141980601_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0141980601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 15:57:57 2012] fullrun_pn_xmm0141980601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Mar 20 15:57:57 2012] fullrun_pn_xmm0141980601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Mar 20 15:57:57 2012] Fit fullrun_pn_xmm0141980601_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Mar 20 17:29:38 2012] Spatial fit model total counts = 2024.770000, observed total counts = 1920.000000
[Tue Mar 20 17:29:38 2012] Offset between fit and detection position for source 3 = 0.096141 pixels
[Tue Mar 20 17:29:38 2012] 2053.285000 total counts/ 592.045000 bgd. counts: snr = 60.054312
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.096141 pixels
  Position = (190.3, 247.8) = 1 33 34.13 30 32 11.8
  Extent = 6.2 (5.9-6.5)", rotation angle = 0
  Source counts = 1461.2 +/- 45.3
  Background counts = 592.0
  Rate = 0.1 +/- 0.004
[Tue Mar 20 17:29:38 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 17:29:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 17:29:38 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 17:29:38 2012] Source does appear to be extended
[Tue Mar 20 17:29:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 17:30:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 20 17:30:05 2012] Initial guess for spatial extent in simple fitting = 6.24"
[Tue Mar 20 17:30:05 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.070
[Tue Mar 20 17:30:05 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 6.24"
[Tue Mar 20 19:57:56 2012] fullrun_pn_xmm0141980601_pi300-10000_cl_pass1_src3.ximg exists
[Tue Mar 20 19:57:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0141980601_pi300-10000_cl_pass1_src3.csv
[Tue Mar 20 19:57:56 2012] fullrun_pn_xmm0141980601_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Mar 20 19:57:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0141980601_pi300-10000_cl_pass1_src3.csv
[Tue Mar 20 19:57:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0141980601_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0141980601_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 19:57:56 2012] fullrun_pn_xmm0141980601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Mar 20 19:57:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0141980601_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Mar 20 19:57:56 2012] fullrun_pn_xmm0141980601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Mar 20 19:57:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0141980601_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Mar 20 19:57:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0141980601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0141980601_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 20:53:39 2012] Warning, spatial fit 3 centroid is now closest to src. 16
[Tue Mar 20 20:53:39 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 20:53:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 20:53:39 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 20:53:39 2012] Source does appear to be extended
[Tue Mar 20 20:53:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 20:54:01 2012] Counts = 1461.240000, rescaling region sizes by 2.000000
[Tue Mar 20 20:54:01 2012] XMMSAS src. selection expression = ellipse(16504.448400, 21512.800400, 748.411222, 748.411222, 0.000000, X, Y)
[Tue Mar 20 20:54:01 2012] Writing source region out to fullrun_pn_xmm0141980601_pi300-10000_pass1_cl_src3_src.reg
[Tue Mar 20 20:54:01 2012] Extracting stamp from image fullrun_pn_xmm0141980601_pi300-10000_cl_sm2.00.img.gz, (147, 205) - (233, 291)
[Tue Mar 20 20:54:01 2012] XMMSAS bgd. selection expression = annulus(16504.448400, 21512.800400, 2494.704072, 4989.408144, X, Y) && !ellipse(17885.243195, 15768.846329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11177.654000, 28471.528000, 2488.672072, 2488.672072, 0.000000, X, Y) && !ellipse(10608.064000, 27801.442000, 2015.072058, 2015.072058, 0.000000, X, Y) && !ellipse(10741.576000, 27543.287200, 1331.520038, 1331.520038, 0.000000, X, Y) && !ellipse(9436.360000, 23839.556000, 3557.392102, 3557.392102, 0.000000, X, Y) && !ellipse(17262.474213, 23182.714294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11118.578445, 22738.934113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10852.067000, 27173.011360, 2173.664063, 315.011209, 112.939809, X, Y) && !ellipse(10246.746000, 26277.516000, 2663.040077, 2663.040077, 0.000000, X, Y) && !ellipse(9955.914000, 24955.228000, 1778.696051, 1778.696051, 0.000000, X, Y) && !ellipse(17438.437607, 23773.561859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20276.482056, 17438.811966, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 20 20:54:01 2012] Writing fullrun_pn_xmm0141980601_pi300-10000_pass1_cl_src3.gif
[Tue Mar 20 21:08:58 2012] Mean detx,y = (-8066.73, 9145.42) 
[Tue Mar 20 21:09:03 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 20 21:09:58 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 20 21:09:59 2012] Setting source spectrum file to fullrun_pn_xmm0141980601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Mar 20 21:09:59 2012] Setting bgd. spectrum file to fullrun_pn_xmm0141980601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Mar 20 23:35:14 2012] Updating aperture counts using extracted products
[Tue Mar 20 23:35:14 2012] Error reading totcts from fullrun_pn_xmm0141980601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Mar 20 23:35:16 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 20 23:35:16 2012] Using photon index=1.80, rate=0.123, arf fullrun_pn_xmm0141980601_pi300-10000_pass1_cl_src3.arf
[Tue Mar 20 23:35:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 20 23:35:17 2012] Updating source flux to 7.8e-13