[Tue Mar 20 13:39:22 2012] Detection parameters:
  Position = (130.6, 326.1) = 1 33 54.27 30 37 52.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 128.1 +/- 16.7
  Background counts = 16.5
  Rate = 0.01 +/- 0.001

[Tue Mar 20 13:39:25 2012] Off-axis axis estimate = 12.33'
[Tue Mar 20 13:41:30 2012] Using EEF radius (= 12.59 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 13:41:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 20 13:41:30 2012] Initial guess for spatial extent in simple fitting = 12.59"
[Tue Mar 20 13:41:30 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.911
[Tue Mar 20 13:41:30 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 12.59"
[Tue Mar 20 15:57:56 2012] fullrun_pn_xmm0141980601_pi300-10000_cl_pass0_src10.ximg exists
[Tue Mar 20 15:57:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0141980601_pi300-10000_cl_pass0_src10.csv
[Tue Mar 20 15:57:56 2012] fullrun_pn_xmm0141980601_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue Mar 20 15:57:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0141980601_pi300-10000_cl_pass0_src10.csv
[Tue Mar 20 15:57:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0141980601_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0141980601_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 15:57:57 2012] fullrun_pn_xmm0141980601_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue Mar 20 15:57:57 2012] fullrun_pn_xmm0141980601_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Mar 20 15:57:57 2012] Fit fullrun_pn_xmm0141980601_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Tue Mar 20 17:29:38 2012] Warning, spatial fit 10 centroid is now closest to src. 11
[Tue Mar 20 17:29:38 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 16.585211 pixels away
[Tue Mar 20 17:29:38 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 17:29:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 17:29:38 2012] Assessing source extent using major
[Tue Mar 20 17:29:38 2012] Source does appear to be extended
[Tue Mar 20 17:29:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 17:29:38 2012] Source is confused with source 11
[Tue Mar 20 17:29:38 2012] Source is confused with source 12
[Tue Mar 20 17:29:38 2012] Source is confused with source 24
[Tue Mar 20 17:30:05 2012] Using EEF radius (= 12.59 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 17:30:05 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 20 17:30:05 2012] Initial guess for spatial extent in simple fitting = 12.59"
[Tue Mar 20 17:30:05 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.911
[Tue Mar 20 17:30:05 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 12.59"
[Tue Mar 20 19:57:56 2012] fullrun_pn_xmm0141980601_pi300-10000_cl_pass1_src10.ximg exists
[Tue Mar 20 19:57:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0141980601_pi300-10000_cl_pass1_src10.csv
[Tue Mar 20 19:57:56 2012] fullrun_pn_xmm0141980601_pi300-10000_cl_pass1_src10_1.ximg exists
[Tue Mar 20 19:57:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0141980601_pi300-10000_cl_pass1_src10.csv
[Tue Mar 20 19:57:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0141980601_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0141980601_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 19:57:56 2012] fullrun_pn_xmm0141980601_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Tue Mar 20 19:57:56 2012] fullrun_pn_xmm0141980601_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Mar 20 19:57:56 2012] Fit fullrun_pn_xmm0141980601_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Tue Mar 20 20:53:39 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 15.996124 pixels away
[Tue Mar 20 20:53:39 2012] Warning, spatial fit 10 centroid is now closest to src. 11
[Tue Mar 20 20:53:39 2012] Spatial fit model total counts = 1541.410000, observed total counts = 1548.000000
[Tue Mar 20 20:53:39 2012] Offset between fit and detection position for source 10 = 6.721503 pixels
[Tue Mar 20 20:53:39 2012] Warning, changing simple spatial fit ID from 10 to 11
[Tue Mar 20 20:53:39 2012] 1491.028000 total counts/ 959.501000 bgd. counts: snr = 17.159420
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 6.721503 pixels
  Position = (133.9, 331.9) = 1 33 53.16 30 38 17.3
  Extent = 25.9" x 17.1", rotation angle = 121
  Source counts = 531.5 +/- 38.6
  Background counts = 959.5
  Rate = 0.04 +/- 0.003
[Tue Mar 20 20:53:39 2012] Spatial fit model total counts = 632.798000, observed total counts = 632.000000
[Tue Mar 20 20:53:39 2012] Offset between fit and detection position for source 10 = 6.390855 pixels
[Tue Mar 20 20:53:39 2012] Warning, changing simple spatial fit ID from 11 to 24
[Tue Mar 20 20:53:39 2012] 504.698000 total counts/ 196.906000 bgd. counts: snr = 21.934506
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 6.390855 pixels
  Position = (129.0, 327.8) = 1 33 54.80 30 37 59.3
  Extent = 31.1 (31.1-62.2)", rotation angle = 0
  Source counts = 307.8 +/- 22.5
  Background counts = 196.9
  Rate = 0.03 +/- 0.002
[Tue Mar 20 20:53:39 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 20:53:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 20:53:39 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 20:53:39 2012] Source does appear to be extended
[Tue Mar 20 20:53:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 20:54:01 2012] XMMSAS src. selection expression = ellipse(11177.654000, 28471.528000, 1866.504054, 1866.504054, 0.000000, X, Y)
[Tue Mar 20 20:54:01 2012] Writing source region out to fullrun_pn_xmm0141980601_pi300-10000_pass1_cl_src10_src.reg
[Tue Mar 20 20:54:01 2012] Extracting stamp from image fullrun_pn_xmm0141980601_pi300-10000_cl_sm2.00.img.gz, (22, 221) - (236, 435)
[Tue Mar 20 20:54:01 2012] XMMSAS bgd. selection expression = annulus(11177.654000, 28471.528000, 3110.840090, 6221.680179, X, Y) && !ellipse(12226.640894, 30400.743473, 3276.955181, 1529.117927, 309.369452, X, Y) && !ellipse(12316.454651, 30672.302368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17872.925186, 33623.290436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13417.154000, 33355.010600, 642.715218, 642.715218, 0.000000, X, Y) && !ellipse(12700.388000, 31799.568000, 1893.480054, 1893.480054, 0.000000, X, Y) && !ellipse(10608.064000, 27801.442000, 2015.072058, 2015.072058, 0.000000, X, Y) && !ellipse(10741.576000, 27543.287200, 1331.520038, 1331.520038, 0.000000, X, Y) && !ellipse(10211.993469, 25715.896332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9436.360000, 23839.556000, 3557.392102, 3557.392102, 0.000000, X, Y) && !ellipse(9359.018181, 23528.276978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17262.474213, 23182.714294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9002.444427, 22868.191559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11118.578445, 22738.934113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10852.067000, 27173.011360, 2173.664063, 315.011209, 112.939809, X, Y) && !ellipse(10246.746000, 26277.516000, 2663.040077, 2663.040077, 0.000000, X, Y) && !ellipse(9955.914000, 24955.228000, 1778.696051, 1778.696051, 0.000000, X, Y) && !ellipse(17438.437607, 23773.561859, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 20 20:54:01 2012] Writing fullrun_pn_xmm0141980601_pi300-10000_pass1_cl_src10.gif
[Tue Mar 20 21:18:14 2012] Mean detx,y = (-15448.17, 3804.04) 
[Tue Mar 20 21:18:19 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 20 21:19:27 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 20 21:19:27 2012] Setting source spectrum file to fullrun_pn_xmm0141980601_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Mar 20 21:19:27 2012] Setting bgd. spectrum file to fullrun_pn_xmm0141980601_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue Mar 20 23:35:15 2012] Updating aperture counts using extracted products
[Tue Mar 20 23:35:15 2012] Error reading totcts from fullrun_pn_xmm0141980601_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Mar 20 23:35:17 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 20 23:35:17 2012] Using photon index=1.80, rate=0.0258, arf fullrun_pn_xmm0141980601_pi300-10000_pass1_cl_src10.arf
[Tue Mar 20 23:35:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 20 23:35:17 2012] Updating source flux to 1.8e-13
[Tue Mar 20 23:42:47 2012] Flag c found in src. 10 procflags, skipping spectral fitting