[Tue Mar 20 13:39:21 2012] Detection parameters:
  Position = (140.2, 347.7) = 1 33 51.05 30 39 33.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 12208.3 +/- 163.2
  Background counts = 17.2
  Rate = 1 +/- 0.01

[Tue Mar 20 13:39:25 2012] Off-axis axis estimate = 12.02'
[Tue Mar 20 13:41:30 2012] Using EEF radius (= 12.44 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 13:41:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 20 13:41:30 2012] Initial guess for spatial extent in simple fitting = 12.44"
[Tue Mar 20 13:41:30 2012] source mask rpix=2.9, npix_max = 45, mask sum = 46, frac = 1.019
[Tue Mar 20 13:41:30 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.44"
[Tue Mar 20 15:57:56 2012] fullrun_pn_xmm0141980601_pi300-10000_cl_pass0_src1.ximg exists
[Tue Mar 20 15:57:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0141980601_pi300-10000_cl_pass0_src1.csv
[Tue Mar 20 15:57:56 2012] fullrun_pn_xmm0141980601_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Mar 20 15:57:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0141980601_pi300-10000_cl_pass0_src1.csv
[Tue Mar 20 15:57:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0141980601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0141980601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 15:57:57 2012] fullrun_pn_xmm0141980601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Mar 20 15:57:57 2012] fullrun_pn_xmm0141980601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Mar 20 15:57:57 2012] Fit fullrun_pn_xmm0141980601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Mar 20 17:29:38 2012] Spatial fit model total counts = 17676.800000, observed total counts = 16218.000000
[Tue Mar 20 17:29:38 2012] Offset between fit and detection position for source 1 = 2.808996 pixels
[Tue Mar 20 17:29:38 2012] 16391.680000 total counts/ 2564.280000 bgd. counts: snr = 273.059823
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.808996 pixels
  Position = (140.9, 350.5) = 1 33 50.83 30 39 38.0
  Extent = 11.1 (10.9-11.3)", rotation angle = 0
  Source counts = 13827.4 +/- 128.0
  Background counts = 2564.3
  Rate = 1 +/- 0.01
[Tue Mar 20 17:29:38 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 17:29:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 17:29:38 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 17:29:38 2012] Source does appear to be extended
[Tue Mar 20 17:29:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 17:29:38 2012] Source is confused with source 2
[Tue Mar 20 17:30:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 20 17:30:05 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 20 17:30:05 2012] Initial guess for spatial extent in simple fitting = 11.11"
[Tue Mar 20 17:30:05 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.965
[Tue Mar 20 17:30:05 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.11"
[Tue Mar 20 19:57:56 2012] fullrun_pn_xmm0141980601_pi300-10000_cl_pass1_src1.ximg exists
[Tue Mar 20 19:57:56 2012] fullrun_pn_xmm0141980601_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Mar 20 19:57:56 2012] Fit fullrun_pn_xmm0141980601_pi300-10000_cl_pass1_src1 appears to have run properly
[Tue Mar 20 19:57:56 2012] fullrun_pn_xmm0141980601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Mar 20 19:57:56 2012] fullrun_pn_xmm0141980601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Mar 20 19:57:56 2012] Fit fullrun_pn_xmm0141980601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Mar 20 20:53:39 2012] Spatial fit model total counts = 15789.900000, observed total counts = 15895.000000
[Tue Mar 20 20:53:39 2012] Offset between fit and detection position for source 1 = 0.538152 pixels
[Tue Mar 20 20:53:39 2012] 11505.833600 total counts/ 13.433600 bgd. counts: snr = 3135.555752
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.538152 pixels
  Position = (141.1, 350.0) = 1 33 50.75 30 39 35.9
  Extent = 13.7" x 6.4", rotation angle = 309
  Source counts = 11492.4 +/- 107.3
  Background counts = 13.4
  Rate = 1 +/- 0.009
[Tue Mar 20 20:53:39 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 20:53:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 20:53:39 2012] Assessing source extent using major
[Tue Mar 20 20:53:39 2012] Source does appear to be extended
[Tue Mar 20 20:53:39 2012] Computing asymmetry using major and minor axis, asym = 2.14
[Tue Mar 20 20:53:39 2012] Source is asymmetric
[Tue Mar 20 20:54:01 2012] Counts = 11492.400000, rescaling region sizes by 3.000000
[Tue Mar 20 20:54:01 2012] XMMSAS src. selection expression = ellipse(12226.640894, 30400.743473, 2457.716386, 1146.838445, 309.369452, X, Y)
[Tue Mar 20 20:54:01 2012] Writing source region out to fullrun_pn_xmm0141980601_pi300-10000_pass1_cl_src1_src.reg
[Tue Mar 20 20:54:01 2012] Extracting stamp from image fullrun_pn_xmm0141980601_pi300-10000_cl_sm2.00.img.gz, (0, 209) - (282, 491)
[Tue Mar 20 20:54:01 2012] XMMSAS bgd. selection expression = annulus(12226.640894, 30400.743473, 12288.581931, 24577.163861, X, Y) && !ellipse(12316.454651, 30672.302368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16504.448400, 21512.800400, 498.940814, 498.940814, 0.000000, X, Y) && !ellipse(17885.243195, 15768.846329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17872.925186, 33623.290436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13417.154000, 33355.010600, 642.715218, 642.715218, 0.000000, X, Y) && !ellipse(12700.388000, 31799.568000, 1893.480054, 1893.480054, 0.000000, X, Y) && !ellipse(22302.845520, 29300.985600, 466.538413, 466.538413, 0.000000, X, Y) && !ellipse(27004.761540, 28758.200800, 480.962414, 480.962414, 0.000000, X, Y) && !ellipse(11177.654000, 28471.528000, 2488.672072, 2488.672072, 0.000000, X, Y) && !ellipse(10608.064000, 27801.442000, 2015.072058, 2015.072058, 0.000000, X, Y) && !ellipse(10741.576000, 27543.287200, 1331.520038, 1331.520038, 0.000000, X, Y) && !ellipse(10211.993469, 25715.896332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9436.360000, 23839.556000, 3557.392102, 3557.392102, 0.000000, X, Y) && !ellipse(9359.018181, 23528.276978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17262.474213, 23182.714294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9002.444427, 22868.191559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11118.578445, 22738.934113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26917.642242, 22682.400574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32451.344574, 21807.667984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19052.925079, 35714.062286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15695.665756, 39720.668762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18137.646210, 39019.733063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10852.067000, 27173.011360, 2173.664063, 315.011209, 112.939809, X, Y) && !ellipse(10246.746000, 26277.516000, 2663.040077, 2663.040077, 0.000000, X, Y) && !ellipse(9955.914000, 24955.228000, 1778.696051, 1778.696051, 0.000000, X, Y) && !ellipse(24842.633301, 21245.973969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34804.574400, 40223.017200, 678.284820, 226.784807, 17.821386, X, Y) && !ellipse(35405.670013, 36787.546387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25077.011322, 31695.083374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24407.189911, 29777.504395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33141.077800, 26418.043800, 648.489619, 648.489619, 0.000000, X, Y) && !ellipse(29627.657196, 24994.299194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17438.437607, 23773.561859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27739.768000, 20923.427400, 429.117612, 429.117612, 0.000000, X, Y) && !ellipse(20276.482056, 17438.811966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17797.389400, 41861.915600, 865.918713, 865.918713, 0.000000, X, Y)
[Tue Mar 20 20:54:01 2012] Writing fullrun_pn_xmm0141980601_pi300-10000_pass1_cl_src1.gif
[Tue Mar 20 20:54:22 2012] Mean detx,y = (-15436.84, 2593.83) 
[Tue Mar 20 20:54:29 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 20 21:05:57 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 20 21:05:57 2012] Setting source spectrum file to fullrun_pn_xmm0141980601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Mar 20 21:05:57 2012] Setting bgd. spectrum file to fullrun_pn_xmm0141980601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Mar 20 23:35:14 2012] Updating aperture counts using extracted products
[Tue Mar 20 23:35:14 2012] Error reading totcts from fullrun_pn_xmm0141980601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Mar 20 23:35:16 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 20 23:35:16 2012] Using photon index=1.80, rate=0.964, arf fullrun_pn_xmm0141980601_pi300-10000_pass1_cl_src1.arf
[Tue Mar 20 23:35:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 20 23:35:16 2012] Updating source flux to 8.1e-12
[Tue Mar 20 23:42:47 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Tue Mar 20 23:45:09 2012] Reading fit data from xmm0141980601/analysis//spectral/fullrun_pn_xmm0141980601_pi300-10000_pass1_cl_src1_pl.csv
[Tue Mar 20 23:45:09 2012] Spectral fit parameter nH value = 2.41982e+21
[Tue Mar 20 23:45:09 2012] Spectral fit parameter PhoIndex value = 2.24393
[Tue Mar 20 23:45:09 2012] Failed to get F(0.3-8.0) from xmm0141980601/analysis//spectral/fullrun_pn_xmm0141980601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Mar 20 23:45:09 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 20 23:45:09 2012] Using Nh = 2.4e+21, photon index=2.24, rate=0.964, arf fullrun_pn_xmm0141980601_pi300-10000_pass1_cl_src1.arf
[Tue Mar 20 23:45:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 20 23:45:09 2012] Updating source flux to 9.6e-12