[Tue Mar 20 13:39:28 2012] Detection parameters:
  Position = (259.3, 351.6) = 1 33 10.92 30 39 44.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 20.5 +/- 5.9
  Background counts = 4.2
  Rate = 0.002 +/- 0.0007

[Tue Mar 20 13:39:28 2012] Off-axis axis estimate = 4.79'
[Tue Mar 20 15:57:58 2012] Using EEF radius (= 8.82 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 15:57:58 2012] Initial guess for spatial extent in simple fitting = 8.82"
[Tue Mar 20 15:57:58 2012] source mask rpix=2.0, npix_max = 25, mask sum = 24, frac = 0.939
[Tue Mar 20 15:57:58 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 8.82"
[Tue Mar 20 16:47:19 2012] fullrun_mos1_xmm0141980601_pi300-10000_cl_pass0_src18.ximg exists
[Tue Mar 20 16:47:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0141980601_pi300-10000_cl_pass0_src18.csv
[Tue Mar 20 16:47:19 2012] fullrun_mos1_xmm0141980601_pi300-10000_cl_pass0_src18_1.ximg exists
[Tue Mar 20 16:47:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0141980601_pi300-10000_cl_pass0_src18.csv
[Tue Mar 20 16:47:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0141980601_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0141980601_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 16:47:20 2012] fullrun_mos1_xmm0141980601_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Tue Mar 20 16:47:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0141980601_pi300-10000_cl_pass0_tfrozen_src18.csv
[Tue Mar 20 16:47:20 2012] fullrun_mos1_xmm0141980601_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Tue Mar 20 16:47:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0141980601_pi300-10000_cl_pass0_tfrozen_src18.csv
[Tue Mar 20 16:47:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0141980601_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0141980601_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 17:29:45 2012] Spatial fit model total counts = 95.211600, observed total counts = 54.000000
[Tue Mar 20 17:29:45 2012] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Mar 20 17:29:45 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 17:29:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 17:29:45 2012] Assessing source extent using major
[Tue Mar 20 17:29:45 2012] Source does appear to be extended
[Tue Mar 20 17:29:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 17:29:45 2012] Deleting source due to low Poisson probability 0.9