[Sun Jan 29 10:00:25 2012] Detection parameters:
  Position = (206.1, 446.6) = 1 34 32.88 30 57 55.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.8 +/- 10.3
  Background counts = 4.6
  Rate = 0.005 +/- 0.0008

[Sun Jan 29 10:00:26 2012] Off-axis axis estimate = 12.66'
[Sun Jan 29 12:08:44 2012] Using EEF radius (= 12.76 ")to estimate initial spatial extent for simple fitting
[Sun Jan 29 12:08:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jan 29 12:08:44 2012] Initial guess for spatial extent in simple fitting = 12.76"
[Sun Jan 29 12:08:44 2012] source mask rpix=2.9, npix_max = 47, mask sum = 42, frac = 0.891
[Sun Jan 29 12:08:44 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 12.76"
[Sun Jan 29 13:05:30 2012] fullrun_mos2_xmm0141980301_pi300-10000_cl_pass0_src8.ximg exists
[Sun Jan 29 13:05:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0141980301_pi300-10000_cl_pass0_src8.csv
[Sun Jan 29 13:05:30 2012] fullrun_mos2_xmm0141980301_pi300-10000_cl_pass0_src8_1.ximg exists
[Sun Jan 29 13:05:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0141980301_pi300-10000_cl_pass0_src8.csv
[Sun Jan 29 13:05:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0141980301_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0141980301_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan 29 13:05:30 2012] fullrun_mos2_xmm0141980301_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sun Jan 29 13:05:30 2012] fullrun_mos2_xmm0141980301_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sun Jan 29 13:05:30 2012] Fit fullrun_mos2_xmm0141980301_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Sun Jan 29 13:05:38 2012] Spatial fit model total counts = 100.787000, observed total counts = 101.000000
[Sun Jan 29 13:05:38 2012] Offset between fit and detection position for source 7 = 0.171207 pixels
[Sun Jan 29 13:05:38 2012] 101.605500 total counts/ 60.241800 bgd. counts: snr = 5.329303
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.171207 pixels
  Position = (206.0, 446.4) = 1 34 32.89 30 57 53.9
  Extent = 5.4 (3.2-7.4)", rotation angle = 0
  Source counts = 41.4 +/- 10.1
  Background counts = 60.2
  Rate = 0.003 +/- 0.0008
[Sun Jan 29 13:05:39 2012] Vigneting correction estimate = 1.000000
[Sun Jan 29 13:05:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan 29 13:05:39 2012] Assessing source extent using major axis lower bound
[Sun Jan 29 13:05:39 2012] Source does appear to be extended
[Sun Jan 29 13:05:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan 29 14:40:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jan 29 14:40:11 2012] Initial guess for spatial extent in simple fitting = 5.41"
[Sun Jan 29 14:40:11 2012] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.985
[Sun Jan 29 14:40:11 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 5.41"
[Sun Jan 29 15:19:13 2012] fullrun_mos2_xmm0141980301_pi300-10000_cl_pass1_src8.ximg exists
[Sun Jan 29 15:19:13 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0141980301_pi300-10000_cl_pass1_src8.csv
[Sun Jan 29 15:19:13 2012] fullrun_mos2_xmm0141980301_pi300-10000_cl_pass1_src8_1.ximg exists
[Sun Jan 29 15:19:13 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0141980301_pi300-10000_cl_pass1_src8.csv
[Sun Jan 29 15:19:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0141980301_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0141980301_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan 29 15:19:13 2012] fullrun_mos2_xmm0141980301_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sun Jan 29 15:19:13 2012] fullrun_mos2_xmm0141980301_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sun Jan 29 15:19:13 2012] Fit fullrun_mos2_xmm0141980301_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Sun Jan 29 15:19:20 2012] Spatial fit model total counts = 91.231800, observed total counts = 91.000000
[Sun Jan 29 15:19:20 2012] Offset between fit and detection position for source 7 = 0.078405 pixels
[Sun Jan 29 15:19:20 2012] 90.971200 total counts/ 51.290700 bgd. counts: snr = 5.540613
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.078405 pixels
  Position = (206.1, 446.5) = 1 34 32.87 30 57 54.1
  Extent = 5.1 (2.5-7.1)", rotation angle = 0
  Source counts = 39.7 +/- 9.5
  Background counts = 51.3
  Rate = 0.003 +/- 0.0008
[Sun Jan 29 15:19:20 2012] Vigneting correction estimate = 1.000000
[Sun Jan 29 15:19:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan 29 15:19:20 2012] Assessing source extent using major axis lower bound
[Sun Jan 29 15:19:20 2012] Source does appear to be extended
[Sun Jan 29 15:19:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan 29 15:25:41 2012] XMMSAS src. selection expression = ellipse(17881.628500, 38796.068800, 307.279193, 307.279193, 0.000000, X, Y)
[Sun Jan 29 15:25:41 2012] Writing source region out to fullrun_mos2_xmm0141980301_pi300-10000_pass1_cl_src7_src.reg
[Sun Jan 29 15:25:41 2012] Extracting stamp from image fullrun_mos2_xmm0141980301_pi300-10000_cl_sm2.00.img.gz, (188, 429) - (224, 464)
[Sun Jan 29 15:25:41 2012] XMMSAS bgd. selection expression = annulus(17881.628500, 38796.068800, 512.131988, 1024.263975, X, Y)
[Sun Jan 29 15:25:41 2012] Writing fullrun_mos2_xmm0141980301_pi300-10000_pass1_cl_src7.gif
[Sun Jan 29 15:27:46 2012] Mean detx,y = (-10537.35, -11263.27) 
[Sun Jan 29 15:27:47 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan 29 15:27:53 2012] Binned source spectrum to 10 counts/bin
[Sun Jan 29 15:27:53 2012] Setting source spectrum file to fullrun_mos2_xmm0141980301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Jan 29 15:27:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0141980301_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sun Jan 29 15:35:09 2012] Not generating rmf since there are only 39 counts
[Sun Jan 29 15:35:09 2012] rmf not generated due to insufficient counts
[Sun Jan 29 15:36:51 2012] Updating aperture counts using extracted products
[Sun Jan 29 15:36:51 2012] Error reading totcts from fullrun_mos2_xmm0141980301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Jan 29 15:36:51 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan 29 15:36:51 2012] Using photon index=1.80, rate=0.00323, arf fullrun_mos2_xmm0141980301_pi300-10000_pass1_cl_src7.arf
[Sun Jan 29 15:36:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan 29 15:36:51 2012] Updating source flux to 1.2e-13
[Sun Jan 29 15:36:52 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting