[Sun Jan 29 10:00:25 2012] Detection parameters:
  Position = (409.2, 255.1) = 1 33 24.26 30 44 1.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 465.8 +/- 26.0
  Background counts = 6.2
  Rate = 0.04 +/- 0.002

[Sun Jan 29 10:00:26 2012] Off-axis axis estimate = 8.63'
[Sun Jan 29 12:08:44 2012] Using EEF radius (= 10.74 ")to estimate initial spatial extent for simple fitting
[Sun Jan 29 12:08:44 2012] Initial guess for spatial extent in simple fitting = 10.74"
[Sun Jan 29 12:08:44 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.021
[Sun Jan 29 12:08:44 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.74"
[Sun Jan 29 13:05:30 2012] fullrun_mos2_xmm0141980301_pi300-10000_cl_pass0_src3.ximg exists
[Sun Jan 29 13:05:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0141980301_pi300-10000_cl_pass0_src3.csv
[Sun Jan 29 13:05:30 2012] fullrun_mos2_xmm0141980301_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Jan 29 13:05:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0141980301_pi300-10000_cl_pass0_src3.csv
[Sun Jan 29 13:05:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0141980301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0141980301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan 29 13:05:30 2012] fullrun_mos2_xmm0141980301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Jan 29 13:05:30 2012] fullrun_mos2_xmm0141980301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Jan 29 13:05:30 2012] Fit fullrun_mos2_xmm0141980301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Jan 29 13:05:38 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.460948 pixels away
[Sun Jan 29 13:05:39 2012] Vigneting correction estimate = 1.000000
[Sun Jan 29 13:05:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan 29 13:05:39 2012] Assessing source extent using major
[Sun Jan 29 13:05:39 2012] Source does appear to be extended
[Sun Jan 29 13:05:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan 29 14:40:11 2012] Using EEF radius (= 10.74 ")to estimate initial spatial extent for simple fitting
[Sun Jan 29 14:40:11 2012] Initial guess for spatial extent in simple fitting = 10.74"
[Sun Jan 29 14:40:11 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.021
[Sun Jan 29 14:40:11 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 10.74"
[Sun Jan 29 15:19:13 2012] fullrun_mos2_xmm0141980301_pi300-10000_cl_pass1_src3.ximg exists
[Sun Jan 29 15:19:13 2012] fullrun_mos2_xmm0141980301_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Jan 29 15:19:13 2012] Fit fullrun_mos2_xmm0141980301_pi300-10000_cl_pass1_src3 appears to have run properly
[Sun Jan 29 15:19:13 2012] fullrun_mos2_xmm0141980301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Jan 29 15:19:13 2012] fullrun_mos2_xmm0141980301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Jan 29 15:19:13 2012] Fit fullrun_mos2_xmm0141980301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Jan 29 15:19:20 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.460948 pixels away
[Sun Jan 29 15:19:20 2012] Vigneting correction estimate = 1.000000
[Sun Jan 29 15:19:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan 29 15:19:20 2012] Assessing source extent using major
[Sun Jan 29 15:19:20 2012] Source does appear to be extended
[Sun Jan 29 15:19:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan 29 15:25:41 2012] XMMSAS src. selection expression = ellipse(35555.363220, 22144.840775, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jan 29 15:25:41 2012] Writing source region out to fullrun_mos2_xmm0141980301_pi300-10000_pass1_cl_src2_src.reg
[Sun Jan 29 15:25:41 2012] Extracting stamp from image fullrun_mos2_xmm0141980301_pi300-10000_cl_sm2.00.img.gz, (372, 218) - (447, 293)
[Sun Jan 29 15:25:41 2012] XMMSAS bgd. selection expression = annulus(35555.363220, 22144.840775, 1087.500000, 2175.000000, X, Y)
[Sun Jan 29 15:25:41 2012] Writing fullrun_mos2_xmm0141980301_pi300-10000_pass1_cl_src2.gif
[Sun Jan 29 15:26:37 2012] Mean detx,y = (11501.12, -1117.84) 
[Sun Jan 29 15:26:38 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan 29 15:26:44 2012] Binned source spectrum to 10 counts/bin
[Sun Jan 29 15:26:44 2012] Setting source spectrum file to fullrun_mos2_xmm0141980301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jan 29 15:26:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0141980301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Jan 29 15:34:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jan 29 15:34:26 2012] rmf not generated due to insufficient counts
[Sun Jan 29 15:36:51 2012] Updating aperture counts using extracted products
[Sun Jan 29 15:36:51 2012] Error reading totcts from fullrun_mos2_xmm0141980301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jan 29 15:36:51 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan 29 15:36:51 2012] Using photon index=1.80, rate=0.0376, arf fullrun_mos2_xmm0141980301_pi300-10000_pass1_cl_src2.arf
[Sun Jan 29 15:36:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan 29 15:36:51 2012] Updating source flux to 8.2e-13
[Sun Jan 29 15:36:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting