[Sun Jan 29 10:00:26 2012] Detection parameters:
  Position = (200.8, 295.2) = 1 34 34.59 30 46 58.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 26.4 +/- 7.1
  Background counts = 7.5
  Rate = 0.003 +/- 0.0008

[Sun Jan 29 10:00:26 2012] Off-axis axis estimate = 7.08'
[Sun Jan 29 12:08:44 2012] Using EEF radius (= 9.97 ")to estimate initial spatial extent for simple fitting
[Sun Jan 29 12:08:44 2012] Initial guess for spatial extent in simple fitting = 9.97"
[Sun Jan 29 12:08:44 2012] source mask rpix=2.3, npix_max = 31, mask sum = 26, frac = 0.834
[Sun Jan 29 12:08:44 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 9.97"
[Sun Jan 29 13:05:30 2012] fullrun_mos2_xmm0141980301_pi300-10000_cl_pass0_src15.ximg exists
[Sun Jan 29 13:05:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0141980301_pi300-10000_cl_pass0_src15.csv
[Sun Jan 29 13:05:30 2012] fullrun_mos2_xmm0141980301_pi300-10000_cl_pass0_src15_1.ximg exists
[Sun Jan 29 13:05:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0141980301_pi300-10000_cl_pass0_src15.csv
[Sun Jan 29 13:05:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0141980301_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0141980301_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan 29 13:05:30 2012] fullrun_mos2_xmm0141980301_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sun Jan 29 13:05:30 2012] fullrun_mos2_xmm0141980301_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sun Jan 29 13:05:30 2012] Fit fullrun_mos2_xmm0141980301_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sun Jan 29 13:05:39 2012] Source 11 is offset by -4.555839 and 4.602738 pixels which is larger than
2 X fitted extent = 1.145913 x 1.145913, not incorporating fit results
[Sun Jan 29 13:05:39 2012] Vigneting correction estimate = 1.000000
[Sun Jan 29 13:05:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan 29 13:05:39 2012] Assessing source extent using major
[Sun Jan 29 13:05:39 2012] Source does appear to be extended
[Sun Jan 29 13:05:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan 29 13:05:39 2012] Source is confused with source 10
[Sun Jan 29 14:40:11 2012] Using EEF radius (= 9.97 ")to estimate initial spatial extent for simple fitting
[Sun Jan 29 14:40:11 2012] Initial guess for spatial extent in simple fitting = 9.97"
[Sun Jan 29 14:40:11 2012] source mask rpix=2.3, npix_max = 31, mask sum = 26, frac = 0.834
[Sun Jan 29 14:40:11 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 9.97"
[Sun Jan 29 15:19:13 2012] fullrun_mos2_xmm0141980301_pi300-10000_cl_pass1_src13.ximg exists
[Sun Jan 29 15:19:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0141980301_pi300-10000_cl_pass1_src13.csv
[Sun Jan 29 15:19:13 2012] fullrun_mos2_xmm0141980301_pi300-10000_cl_pass1_src13_1.ximg exists
[Sun Jan 29 15:19:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0141980301_pi300-10000_cl_pass1_src13.csv
[Sun Jan 29 15:19:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0141980301_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0141980301_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan 29 15:19:13 2012] fullrun_mos2_xmm0141980301_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sun Jan 29 15:19:13 2012] fullrun_mos2_xmm0141980301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sun Jan 29 15:19:13 2012] Fit fullrun_mos2_xmm0141980301_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Sun Jan 29 15:19:20 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 48.674135 pixels away
[Sun Jan 29 15:19:20 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 14.723543 pixels away
[Sun Jan 29 15:19:20 2012] Source 11 is offset by -4.576345 and 4.600784 pixels which is larger than
2 X fitted extent = 1.145913 x 1.145913, not incorporating fit results
[Sun Jan 29 15:19:20 2012] Vigneting correction estimate = 1.000000
[Sun Jan 29 15:19:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan 29 15:19:20 2012] Assessing source extent using major
[Sun Jan 29 15:19:20 2012] Source does appear to be extended
[Sun Jan 29 15:19:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan 29 15:25:41 2012] XMMSAS src. selection expression = ellipse(17422.229980, 25630.444214, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jan 29 15:25:41 2012] Writing source region out to fullrun_mos2_xmm0141980301_pi300-10000_pass1_cl_src11_src.reg
[Sun Jan 29 15:25:41 2012] Extracting stamp from image fullrun_mos2_xmm0141980301_pi300-10000_cl_sm2.00.img.gz, (163, 258) - (238, 333)
[Sun Jan 29 15:25:41 2012] XMMSAS bgd. selection expression = annulus(17422.229980, 25630.444214, 1087.500000, 2175.000000, X, Y) && !ellipse(14841.060400, 28628.408200, 899.888026, 375.790411, 53.597509, X, Y) && !ellipse(17894.473400, 25631.378600, 1156.672033, 1156.672033, 0.000000, X, Y)
[Sun Jan 29 15:25:41 2012] Writing fullrun_mos2_xmm0141980301_pi300-10000_pass1_cl_src11.gif
[Sun Jan 29 15:29:03 2012] Mean detx,y = (-6734.45, 1259.64) 
[Sun Jan 29 15:29:04 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan 29 15:29:28 2012] Binned source spectrum to 10 counts/bin
[Sun Jan 29 15:29:28 2012] Setting source spectrum file to fullrun_mos2_xmm0141980301_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Jan 29 15:29:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0141980301_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sun Jan 29 15:35:41 2012] Not generating rmf since there are only 26 counts
[Sun Jan 29 15:35:41 2012] rmf not generated due to insufficient counts
[Sun Jan 29 15:36:51 2012] Updating aperture counts using extracted products
[Sun Jan 29 15:36:51 2012] Error reading totcts from fullrun_mos2_xmm0141980301_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Jan 29 15:36:51 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan 29 15:36:51 2012] Using photon index=1.80, rate=0.00314, arf fullrun_mos2_xmm0141980301_pi300-10000_pass1_cl_src11.arf
[Sun Jan 29 15:36:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan 29 15:36:51 2012] Updating source flux to 5.3e-14
[Sun Jan 29 15:36:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting