[Wed Jun 19 03:03:32 2013] Detection parameters:
  Position = (307.6, 323.1) = 4 22 6.95 19 15 19.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 166.6 +/- 16.7
  Background counts = 82.6
  Rate = 0.01 +/- 0.001

[Wed Jun 19 03:03:32 2013] Off-axis axis estimate = 1.91'
[Wed Jun 19 03:37:56 2013] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 03:37:56 2013] Initial guess for spatial extent in simple fitting = 7.38"
[Wed Jun 19 03:37:56 2013] source mask rpix=1.7, npix_max = 19, mask sum = 10, frac = 0.518
[Wed Jun 19 03:37:56 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.38"
[Wed Jun 19 03:44:53 2013] fullrun_mos1_xmm0141960201_pi300-10000_cl_pass0_src2.ximg exists
[Wed Jun 19 03:44:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0141960201_pi300-10000_cl_pass0_src2.csv
[Wed Jun 19 03:44:53 2013] fullrun_mos1_xmm0141960201_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Jun 19 03:44:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0141960201_pi300-10000_cl_pass0_src2.csv
[Wed Jun 19 03:44:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0141960201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0141960201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 03:44:53 2013] fullrun_mos1_xmm0141960201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Jun 19 03:44:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0141960201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed Jun 19 03:44:53 2013] fullrun_mos1_xmm0141960201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Jun 19 03:44:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0141960201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed Jun 19 03:44:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0141960201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0141960201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 03:47:45 2013] Source 1 is offset by -3.419638 and -5.861988 pixels which is larger than
2 X fitted extent = 1.080915 x 6.787219, not incorporating fit results
[Wed Jun 19 03:47:45 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 03:47:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 03:47:45 2013] Assessing source extent using major
[Wed Jun 19 03:47:45 2013] Source does appear to be extended
[Wed Jun 19 03:47:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 03:54:07 2013] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 03:54:07 2013] Initial guess for spatial extent in simple fitting = 7.38"
[Wed Jun 19 03:54:07 2013] source mask rpix=1.7, npix_max = 19, mask sum = 10, frac = 0.518
[Wed Jun 19 03:54:07 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 7.38"
[Wed Jun 19 03:56:47 2013] fullrun_mos1_xmm0141960201_pi300-10000_cl_pass1_src2.ximg exists
[Wed Jun 19 03:56:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0141960201_pi300-10000_cl_pass1_src2.csv
[Wed Jun 19 03:56:47 2013] fullrun_mos1_xmm0141960201_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Jun 19 03:56:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0141960201_pi300-10000_cl_pass1_src2.csv
[Wed Jun 19 03:56:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0141960201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0141960201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 03:56:47 2013] fullrun_mos1_xmm0141960201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Jun 19 03:56:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0141960201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed Jun 19 03:56:47 2013] fullrun_mos1_xmm0141960201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Jun 19 03:56:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0141960201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed Jun 19 03:56:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0141960201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0141960201_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 04:00:11 2013] Source 1 is offset by -0.015767 and -5.041666 pixels which is larger than
2 X fitted extent = 1.148161 x 1.148161, not incorporating fit results
[Wed Jun 19 04:00:11 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 04:00:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 04:00:11 2013] Assessing source extent using major
[Wed Jun 19 04:00:11 2013] Source does appear to be extended
[Wed Jun 19 04:00:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 04:17:24 2013] XMMSAS src. selection expression = ellipse(26710.053467, 28061.089020, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 19 04:17:24 2013] Writing source region out to fullrun_mos1_xmm0141960201_pi300-10000_pass1_cl_src1_src.reg
[Wed Jun 19 04:17:24 2013] Extracting stamp from image fullrun_mos1_xmm0141960201_pi300-10000_cl_sm2.00.img.gz, (270, 286) - (345, 361)
[Wed Jun 19 04:17:24 2013] XMMSAS bgd. selection expression = annulus(26710.053467, 28061.089020, 1087.500000, 2175.000000, X, Y)
[Wed Jun 19 04:17:24 2013] Writing fullrun_mos1_xmm0141960201_pi300-10000_pass1_cl_src1.gif
[Wed Jun 19 04:17:50 2013] Mean detx,y = (777.51, -817.12) 
[Wed Jun 19 04:17:52 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 19 04:18:15 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 19 04:18:16 2013] Setting source spectrum file to fullrun_mos1_xmm0141960201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 19 04:18:16 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0141960201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jun 19 04:21:58 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 19 04:21:58 2013] rmf not generated due to insufficient counts
[Wed Jun 19 04:51:17 2013] Updating aperture counts using extracted products
[Wed Jun 19 04:51:17 2013] Total counts from fullrun_mos1_xmm0141960201_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 235.00
[Wed Jun 19 04:51:17 2013] Total counts from fullrun_mos1_xmm0141960201_pi300-10000_pass1_cl_src1_bgd.pi.gz = 355.00
[Wed Jun 19 04:51:17 2013] Got source and background scale factors 643924.000000, 2686473.000000
[Wed Jun 19 04:51:17 2013] User source parameters:
  Position = (307.6, 323.1) = 4 22 6.95 19 15 19.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 149.9 +/- 16.4
  Background aperture counts = 85.1
  Rate = 0.007 +/- 0.0008

[Wed Jun 19 04:51:17 2013] Updating counts from extracted products
[Wed Jun 19 04:51:17 2013] Set source signif. to 149.91/9.22 = 16.25
[Wed Jun 19 04:51:17 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 04:51:17 2013] Using photon index=1.80, rate=0.00708, arf fullrun_mos1_xmm0141960201_pi300-10000_pass1_cl_src1.arf
[Wed Jun 19 04:51:17 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 04:51:17 2013] Updating source flux to 9.9e-14
[Wed Jun 19 04:51:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 19 04:51:19 2013] xmm0141960201/analysis//spectral/fullrun_mos1_xmm0141960201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete