[Tue Jun 11 20:41:03 2013] Detection parameters:
  Position = (280.0, 320.0) = 4 20 21.50 -50 21 13.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 127.1 +/- 15.2
  Background counts = 24.1
  Rate = 0.006 +/- 0.0008

[Tue Jun 11 20:41:04 2013] Off-axis axis estimate = 2.06'
[Tue Jun 11 20:41:20 2013] Using EEF radius (= 7.46 ")to estimate initial spatial extent for simple fitting
[Tue Jun 11 20:41:20 2013] Initial guess for spatial extent in simple fitting = 7.46"
[Tue Jun 11 20:41:20 2013] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.612
[Tue Jun 11 20:41:20 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 7.46"
[Tue Jun 11 20:41:21 2013] fullrun_pn_xmm0141751001_pi300-10000_cl_pass0_src11.ximg exists
[Tue Jun 11 20:41:21 2013] fullrun_pn_xmm0141751001_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue Jun 11 20:41:21 2013] Fit fullrun_pn_xmm0141751001_pi300-10000_cl_pass0_src11 appears to have run properly
[Tue Jun 11 20:41:22 2013] fullrun_pn_xmm0141751001_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue Jun 11 20:41:22 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0141751001_pi300-10000_cl_pass0_tfrozen_src11.csv
[Tue Jun 11 20:41:22 2013] fullrun_pn_xmm0141751001_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue Jun 11 20:41:22 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0141751001_pi300-10000_cl_pass0_tfrozen_src11.csv
[Tue Jun 11 20:41:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0141751001_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0141751001_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 20:41:29 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 12.129159 pixels away
[Tue Jun 11 20:41:29 2013] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 12.920517 pixels away
[Tue Jun 11 20:41:29 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 20:41:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 20:41:29 2013] Assessing source extent using major
[Tue Jun 11 20:41:29 2013] Source does appear to be extended
[Tue Jun 11 20:41:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 11 20:41:43 2013] Using EEF radius (= 7.46 ")to estimate initial spatial extent for simple fitting
[Tue Jun 11 20:41:43 2013] Initial guess for spatial extent in simple fitting = 7.46"
[Tue Jun 11 20:41:43 2013] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.612
[Tue Jun 11 20:41:43 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 7.46"
[Tue Jun 11 20:41:44 2013] fullrun_pn_xmm0141751001_pi300-10000_cl_pass1_src11.ximg exists
[Tue Jun 11 20:41:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0141751001_pi300-10000_cl_pass1_src11.csv
[Tue Jun 11 20:41:44 2013] fullrun_pn_xmm0141751001_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue Jun 11 20:41:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0141751001_pi300-10000_cl_pass1_src11.csv
[Tue Jun 11 20:41:44 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0141751001_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0141751001_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 20:41:44 2013] fullrun_pn_xmm0141751001_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue Jun 11 20:41:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0141751001_pi300-10000_cl_pass1_tfrozen_src11.csv
[Tue Jun 11 20:41:44 2013] fullrun_pn_xmm0141751001_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue Jun 11 20:41:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0141751001_pi300-10000_cl_pass1_tfrozen_src11.csv
[Tue Jun 11 20:41:44 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0141751001_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0141751001_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 20:41:52 2013] Spatial fit model total counts = 357.342000, observed total counts = 273.000000
[Tue Jun 11 20:41:52 2013] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 11 20:41:52 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 20:41:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 20:41:52 2013] Assessing source extent using major
[Tue Jun 11 20:41:52 2013] Source does appear to be extended
[Tue Jun 11 20:41:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 11 20:42:06 2013] XMMSAS src. selection expression = ellipse(24311.393799, 27794.303711, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 11 20:42:06 2013] Not overwriting source region fullrun_pn_xmm0141751001_pi300-10000_pass1_cl_src11_src.reg
[Tue Jun 11 20:42:06 2013] Extracting stamp from image fullrun_pn_xmm0141751001_pi300-10000_cl_sm2.00.img.gz, (242, 283) - (317, 358)
[Tue Jun 11 20:42:06 2013] XMMSAS bgd. selection expression = annulus(24311.393799, 27794.303711, 1087.500000, 2175.000000, X, Y) && !ellipse(22384.830200, 26183.863831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23424.887482, 25763.673584, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 11 20:42:06 2013] Writing fullrun_pn_xmm0141751001_pi300-10000_pass1_cl_src11.gif
[Tue Jun 11 20:42:07 2013] ../../xmm0141751001/products/events/fullrun_pn_xmm0141751001_pi300-10000_pass1_cl_src11_src.evt and ../../xmm0141751001/products/events/fullrun_pn_xmm0141751001_pi300-10000_pass1_cl_src11_bgd.evt exist, delete to re-create
[Tue Jun 11 20:42:08 2013] Mean detx,y = (-3473.61, 1577.22) 
[Tue Jun 11 20:42:08 2013] ../../xmm0141751001/products/images/fullrun_pn_xmm0141751001_pi300-10000_pass1_cl_src11_src.img and ../../xmm0141751001/products/images/fullrun_pn_xmm0141751001_pi300-10000_pass1_cl_src11_bgd.img exist, delete to re-create
[Tue Jun 11 20:42:08 2013] ../../xmm0141751001/products/spectra/fullrun_pn_xmm0141751001_pi300-10000_pass1_cl_src11_src_b10.pi.gz and ../../xmm0141751001/products/spectra/fullrun_pn_xmm0141751001_pi300-10000_pass1_cl_src11_bgd.pi exist, delete to re-create
[Tue Jun 11 20:42:08 2013] Setting source spectrum file to fullrun_pn_xmm0141751001_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue Jun 11 20:42:08 2013] Setting bgd. spectrum file to fullrun_pn_xmm0141751001_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Tue Jun 11 20:42:08 2013] ../../xmm0141751001/products/lightcurves/fullrun_pn_xmm0141751001_pi300-10000_pass1_cl_src11_src.lc and ../../xmm0141751001/products/lightcurves/fullrun_pn_xmm0141751001_pi300-10000_pass1_cl_src11_bgd.lc exist, delete to re-create
[Tue Jun 11 20:42:11 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 11 20:42:11 2013] rmf not generated due to insufficient counts
[Tue Jun 11 20:42:11 2013] fullrun_pn_xmm0141751001_pi300-10000_pass1_cl_src11.arf exists, delete to re-create
[Tue Jun 11 20:49:29 2013] Updating aperture counts using extracted products
[Tue Jun 11 20:49:29 2013] Total counts from fullrun_pn_xmm0141751001_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 223.00
[Tue Jun 11 20:49:29 2013] Total counts from fullrun_pn_xmm0141751001_pi300-10000_pass1_cl_src11_bgd.pi.gz = 1159.00
[Tue Jun 11 20:49:29 2013] Got source and background scale factors 1044469.000000, 8560764.000000
[Tue Jun 11 20:49:29 2013] User source parameters:
  Position = (280.0, 320.0) = 4 20 21.50 -50 21 13.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 81.6 +/- 16.0
  Background aperture counts = 141.4
  Rate = 0.004 +/- 0.0008

[Tue Jun 11 20:49:29 2013] Updating counts from extracted products
[Tue Jun 11 20:49:29 2013] Set source signif. to 81.59/11.89 = 6.86
[Tue Jun 11 20:49:31 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 11 20:49:31 2013] Using photon index=1.80, rate=0.0041, arf fullrun_pn_xmm0141751001_pi300-10000_pass1_cl_src11.arf
[Tue Jun 11 20:49:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 11 20:49:31 2013] Updating source flux to 1.5e-14
[Tue Jun 11 20:49:42 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 11 20:49:47 2013] xmm0141751001/analysis//spectral/fullrun_pn_xmm0141751001_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete