[Tue Jun 11 20:41:05 2013] Detection parameters:
  Position = (257.7, 302.3) = 4 20 31.64 -50 22 39.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 29.5 +/- 7.4
  Background counts = 6.8
  Rate = 0.002 +/- 0.0004

[Tue Jun 11 20:41:05 2013] Off-axis axis estimate = 2.97'
[Tue Jun 11 20:41:23 2013] Using EEF radius (= 7.91 ")to estimate initial spatial extent for simple fitting
[Tue Jun 11 20:41:23 2013] Initial guess for spatial extent in simple fitting = 7.91"
[Tue Jun 11 20:41:23 2013] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.162
[Tue Jun 11 20:41:23 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 7.91"
[Tue Jun 11 20:41:23 2013] fullrun_mos2_xmm0141751001_pi300-10000_cl_pass0_src17.ximg exists
[Tue Jun 11 20:41:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0141751001_pi300-10000_cl_pass0_src17.csv
[Tue Jun 11 20:41:23 2013] fullrun_mos2_xmm0141751001_pi300-10000_cl_pass0_src17_1.ximg exists
[Tue Jun 11 20:41:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0141751001_pi300-10000_cl_pass0_src17.csv
[Tue Jun 11 20:41:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0141751001_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0141751001_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 20:41:23 2013] fullrun_mos2_xmm0141751001_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Tue Jun 11 20:41:23 2013] fullrun_mos2_xmm0141751001_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Tue Jun 11 20:41:23 2013] Fit fullrun_mos2_xmm0141751001_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Tue Jun 11 20:41:35 2013] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 10.989326 pixels away
[Tue Jun 11 20:41:35 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 20:41:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 20:41:35 2013] Assessing source extent using major
[Tue Jun 11 20:41:35 2013] Source does appear to be extended
[Tue Jun 11 20:41:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 11 20:41:45 2013] Using EEF radius (= 7.91 ")to estimate initial spatial extent for simple fitting
[Tue Jun 11 20:41:45 2013] Initial guess for spatial extent in simple fitting = 7.91"
[Tue Jun 11 20:41:45 2013] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.162
[Tue Jun 11 20:41:45 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 7.91"
[Tue Jun 11 20:41:46 2013] fullrun_mos2_xmm0141751001_pi300-10000_cl_pass1_src17.ximg exists
[Tue Jun 11 20:41:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0141751001_pi300-10000_cl_pass1_src17.csv
[Tue Jun 11 20:41:46 2013] fullrun_mos2_xmm0141751001_pi300-10000_cl_pass1_src17_1.ximg exists
[Tue Jun 11 20:41:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0141751001_pi300-10000_cl_pass1_src17.csv
[Tue Jun 11 20:41:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0141751001_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0141751001_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 20:41:46 2013] fullrun_mos2_xmm0141751001_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Tue Jun 11 20:41:46 2013] fullrun_mos2_xmm0141751001_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Tue Jun 11 20:41:46 2013] Fit fullrun_mos2_xmm0141751001_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Tue Jun 11 20:41:58 2013] Spatial fit model total counts = 88.993800, observed total counts = 89.000000
[Tue Jun 11 20:41:58 2013] Offset between fit and detection position for source 10 = 0.170924 pixels
[Tue Jun 11 20:41:58 2013] 85.716900 total counts/ 66.767300 bgd. counts: snr = 2.319093
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.170924 pixels
  Position = (257.5, 302.3) = 4 20 31.72 -50 22 40.1
  Extent = 4.0 (2.2-7.7)", rotation angle = 0
  Source counts = 18.9 +/- 9.3
  Background counts = 66.8
  Rate = 0.0009 +/- 0.0004
[Tue Jun 11 20:41:58 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 20:41:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 20:41:58 2013] Assessing source extent using major axis lower bound
[Tue Jun 11 20:41:58 2013] Source does appear to be extended
[Tue Jun 11 20:41:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 11 20:42:13 2013] XMMSAS src. selection expression = ellipse(22357.892600, 26247.944800, 240.296407, 240.296407, 0.000000, X, Y)
[Tue Jun 11 20:42:13 2013] Not overwriting source region fullrun_mos2_xmm0141751001_pi300-10000_pass1_cl_src10_src.reg
[Tue Jun 11 20:42:13 2013] Extracting stamp from image fullrun_mos2_xmm0141751001_pi300-10000_cl_sm2.00.img.gz, (244, 288) - (271, 316)
[Tue Jun 11 20:42:13 2013] XMMSAS bgd. selection expression = annulus(22357.892600, 26247.944800, 400.494012, 800.988023, X, Y) && !ellipse(23413.388200, 25570.681600, 320.436009, 320.436009, 0.000000, X, Y)
[Tue Jun 11 20:42:13 2013] Writing fullrun_mos2_xmm0141751001_pi300-10000_pass1_cl_src10.gif
[Tue Jun 11 20:42:43 2013] Mean detx,y = (3617.96, -4251.70) 
[Tue Jun 11 20:42:43 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 11 20:42:50 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 11 20:42:50 2013] Setting source spectrum file to fullrun_mos2_xmm0141751001_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Jun 11 20:42:50 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0141751001_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue Jun 11 20:48:35 2013] Not generating rmf since there are only 18 counts
[Tue Jun 11 20:48:35 2013] rmf not generated due to insufficient counts
[Tue Jun 11 20:49:36 2013] Updating aperture counts using extracted products
[Tue Jun 11 20:49:36 2013] Total counts from fullrun_mos2_xmm0141751001_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 27.00
[Tue Jun 11 20:49:36 2013] Total counts from fullrun_mos2_xmm0141751001_pi300-10000_pass1_cl_src10_bgd.pi.gz = 46.00
[Tue Jun 11 20:49:36 2013] Got source and background scale factors 182400.000000, 1505600.000000
[Tue Jun 11 20:49:36 2013] User source parameters:
  Position = (257.5, 302.3) = 4 20 31.72 -50 22 40.1
  Extent = 4.0 (2.2-7.7)", rotation angle = 0
  Source aperture counts = 21.4 +/- 6.3
  Background aperture counts = 5.6
  Rate = 0.001 +/- 0.0003

[Tue Jun 11 20:49:37 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 11 20:49:37 2013] Using photon index=1.80, rate=0.000875, arf fullrun_mos2_xmm0141751001_pi300-10000_pass1_cl_src10.arf
[Tue Jun 11 20:49:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 11 20:49:37 2013] Updating source flux to 1.4e-14
[Tue Jun 11 20:49:41 2013] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jun 11 20:49:42 2013] xmm0141751001/analysis//spectral/fullrun_mos2_xmm0141751001_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete