[Tue Jun 11 20:41:04 2013] Detection parameters:
  Position = (268.8, 245.4) = 4 20 26.60 -50 26 47.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.0 +/- 10.1
  Background counts = 6.3
  Rate = 0.004 +/- 0.0006

[Tue Jun 11 20:41:05 2013] Off-axis axis estimate = 4.40'
[Tue Jun 11 20:41:22 2013] Using EEF radius (= 8.63 ")to estimate initial spatial extent for simple fitting
[Tue Jun 11 20:41:22 2013] Initial guess for spatial extent in simple fitting = 8.63"
[Tue Jun 11 20:41:22 2013] source mask rpix=2.0, npix_max = 24, mask sum = 18, frac = 0.729
[Tue Jun 11 20:41:22 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 8.63"
[Tue Jun 11 20:41:22 2013] fullrun_mos1_xmm0141751001_pi300-10000_cl_pass0_src9.ximg exists
[Tue Jun 11 20:41:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0141751001_pi300-10000_cl_pass0_src9.csv
[Tue Jun 11 20:41:22 2013] fullrun_mos1_xmm0141751001_pi300-10000_cl_pass0_src9_1.ximg exists
[Tue Jun 11 20:41:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0141751001_pi300-10000_cl_pass0_src9.csv
[Tue Jun 11 20:41:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0141751001_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0141751001_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 20:41:22 2013] fullrun_mos1_xmm0141751001_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Tue Jun 11 20:41:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0141751001_pi300-10000_cl_pass0_tfrozen_src9.csv
[Tue Jun 11 20:41:22 2013] fullrun_mos1_xmm0141751001_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Tue Jun 11 20:41:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0141751001_pi300-10000_cl_pass0_tfrozen_src9.csv
[Tue Jun 11 20:41:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0141751001_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0141751001_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 20:41:32 2013] Source 15 is offset by -3.309634 and 7.310346 pixels which is larger than
2 X fitted extent = 1.130879 x 1.130879, not incorporating fit results
[Tue Jun 11 20:41:32 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 20:41:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 20:41:32 2013] Assessing source extent using major
[Tue Jun 11 20:41:32 2013] Source does appear to be extended
[Tue Jun 11 20:41:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 11 20:41:44 2013] Using EEF radius (= 8.63 ")to estimate initial spatial extent for simple fitting
[Tue Jun 11 20:41:44 2013] Initial guess for spatial extent in simple fitting = 8.63"
[Tue Jun 11 20:41:44 2013] source mask rpix=2.0, npix_max = 24, mask sum = 18, frac = 0.729
[Tue Jun 11 20:41:44 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 8.63"
[Tue Jun 11 20:41:45 2013] fullrun_mos1_xmm0141751001_pi300-10000_cl_pass1_src9.ximg exists
[Tue Jun 11 20:41:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0141751001_pi300-10000_cl_pass1_src9.csv
[Tue Jun 11 20:41:45 2013] fullrun_mos1_xmm0141751001_pi300-10000_cl_pass1_src9_1.ximg exists
[Tue Jun 11 20:41:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0141751001_pi300-10000_cl_pass1_src9.csv
[Tue Jun 11 20:41:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0141751001_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0141751001_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 20:41:45 2013] fullrun_mos1_xmm0141751001_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Tue Jun 11 20:41:45 2013] fullrun_mos1_xmm0141751001_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Tue Jun 11 20:41:45 2013] Fit fullrun_mos1_xmm0141751001_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Tue Jun 11 20:41:55 2013] Spatial fit model total counts = 114.739000, observed total counts = 109.000000
[Tue Jun 11 20:41:55 2013] Offset between fit and detection position for source 15 = 0.135059 pixels
[Tue Jun 11 20:41:55 2013] 112.745100 total counts/ 68.366300 bgd. counts: snr = 5.367283
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.135059 pixels
  Position = (268.9, 245.3) = 4 20 26.58 -50 26 47.8
  Extent = 4.8 (3.5-6.2)", rotation angle = 0
  Source counts = 44.4 +/- 10.6
  Background counts = 68.4
  Rate = 0.002 +/- 0.0005
[Tue Jun 11 20:41:55 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 20:41:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 20:41:55 2013] Assessing source extent using major axis lower bound
[Tue Jun 11 20:41:55 2013] Source does appear to be extended
[Tue Jun 11 20:41:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 11 20:42:11 2013] XMMSAS src. selection expression = ellipse(23344.473800, 21294.854800, 285.948008, 285.948008, 0.000000, X, Y)
[Tue Jun 11 20:42:11 2013] Not overwriting source region fullrun_mos1_xmm0141751001_pi300-10000_pass1_cl_src15_src.reg
[Tue Jun 11 20:42:11 2013] Extracting stamp from image fullrun_mos1_xmm0141751001_pi300-10000_cl_sm2.00.img.gz, (252, 229) - (285, 262)
[Tue Jun 11 20:42:11 2013] XMMSAS bgd. selection expression = annulus(23344.473800, 21294.854800, 476.580014, 953.160027, X, Y)
[Tue Jun 11 20:42:11 2013] Writing fullrun_mos1_xmm0141751001_pi300-10000_pass1_cl_src15.gif
[Tue Jun 11 20:42:12 2013] ../../xmm0141751001/products/events/fullrun_mos1_xmm0141751001_pi300-10000_pass1_cl_src15_src.evt and ../../xmm0141751001/products/events/fullrun_mos1_xmm0141751001_pi300-10000_pass1_cl_src15_bgd.evt exist, delete to re-create
[Tue Jun 11 20:42:12 2013] Mean detx,y = (-6251.67, 715.59) 
[Tue Jun 11 20:42:12 2013] ../../xmm0141751001/products/images/fullrun_mos1_xmm0141751001_pi300-10000_pass1_cl_src15_src.img and ../../xmm0141751001/products/images/fullrun_mos1_xmm0141751001_pi300-10000_pass1_cl_src15_bgd.img exist, delete to re-create
[Tue Jun 11 20:42:12 2013] ../../xmm0141751001/products/spectra/fullrun_mos1_xmm0141751001_pi300-10000_pass1_cl_src15_src_b10.pi.gz and ../../xmm0141751001/products/spectra/fullrun_mos1_xmm0141751001_pi300-10000_pass1_cl_src15_bgd.pi exist, delete to re-create
[Tue Jun 11 20:42:12 2013] Setting source spectrum file to fullrun_mos1_xmm0141751001_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Tue Jun 11 20:42:12 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0141751001_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Tue Jun 11 20:42:12 2013] ../../xmm0141751001/products/lightcurves/fullrun_mos1_xmm0141751001_pi300-10000_pass1_cl_src15_src.lc and ../../xmm0141751001/products/lightcurves/fullrun_mos1_xmm0141751001_pi300-10000_pass1_cl_src15_bgd.lc exist, delete to re-create
[Tue Jun 11 20:42:13 2013] Not generating rmf since there are only 44 counts
[Tue Jun 11 20:42:13 2013] rmf not generated due to insufficient counts
[Tue Jun 11 20:42:13 2013] fullrun_mos1_xmm0141751001_pi300-10000_pass1_cl_src15.arf exists, delete to re-create
[Tue Jun 11 20:49:32 2013] Updating aperture counts using extracted products
[Tue Jun 11 20:49:32 2013] Total counts from fullrun_mos1_xmm0141751001_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 51.00
[Tue Jun 11 20:49:32 2013] Total counts from fullrun_mos1_xmm0141751001_pi300-10000_pass1_cl_src15_bgd.pi.gz = 80.00
[Tue Jun 11 20:49:33 2013] Got source and background scale factors 243765.000000, 1914140.000000
[Tue Jun 11 20:49:33 2013] User source parameters:
  Position = (268.9, 245.3) = 4 20 26.58 -50 26 47.8
  Extent = 4.8 (3.5-6.2)", rotation angle = 0
  Source aperture counts = 40.8 +/- 8.2
  Background aperture counts = 10.2
  Rate = 0.002 +/- 0.0004

[Tue Jun 11 20:49:34 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 11 20:49:34 2013] Using photon index=1.80, rate=0.00205, arf fullrun_mos1_xmm0141751001_pi300-10000_pass1_cl_src15.arf
[Tue Jun 11 20:49:34 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 11 20:49:34 2013] Updating source flux to 3.8e-14
[Tue Jun 11 20:49:39 2013] Flag b found in src. 15 procflags, skipping spectral fitting
[Tue Jun 11 20:49:39 2013] Source 15 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jun 11 20:49:41 2013] xmm0141751001/analysis//spectral/fullrun_mos1_xmm0141751001_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete