[Fri May 25 10:12:00 2012] Detection parameters:
  Position = (328.9, 271.8) = 8 6 14.66 -41 26 6.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.3 +/- 18.0
  Background counts = 95.0
  Rate = 0.01 +/- 0.003

[Fri May 25 10:12:02 2012] Off-axis axis estimate = 2.93'
[Fri May 25 10:14:14 2012] Using EEF radius (= 7.90 ")to estimate initial spatial extent for simple fitting
[Fri May 25 10:14:14 2012] Initial guess for spatial extent in simple fitting = 7.90"
[Fri May 25 10:14:14 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.746
[Fri May 25 10:14:14 2012] Giving source the simple spatial ID 48 for pass 0, mean size = 7.90"
[Fri May 25 17:06:46 2012] fullrun_mos2_xmm0141750501_pi300-10000_cl_pass0_src48.ximg exists
[Fri May 25 17:06:46 2012] fullrun_mos2_xmm0141750501_pi300-10000_cl_pass0_src48_1.ximg exists
[Fri May 25 17:06:46 2012] Fit fullrun_mos2_xmm0141750501_pi300-10000_cl_pass0_src48 appears to have run properly
[Fri May 25 17:06:48 2012] fullrun_mos2_xmm0141750501_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Fri May 25 17:06:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0141750501_pi300-10000_cl_pass0_tfrozen_src48.csv
[Fri May 25 17:06:48 2012] fullrun_mos2_xmm0141750501_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Fri May 25 17:06:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0141750501_pi300-10000_cl_pass0_tfrozen_src48.csv
[Fri May 25 17:06:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0141750501_pi300-10000_cl_pass0_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0141750501_pi300-10000_cl_pass0_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 17:07:08 2012] Warning, spatial fit 48 centroid is now closest to src. 30
[Fri May 25 17:07:08 2012] Vigneting correction estimate = 1.000000
[Fri May 25 17:07:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 17:07:08 2012] Assessing source extent using major
[Fri May 25 17:07:08 2012] Source does appear to be extended
[Fri May 25 17:07:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 17:07:08 2012] Source is confused with source 52
[Fri May 25 17:07:15 2012] Using EEF radius (= 7.90 ")to estimate initial spatial extent for simple fitting
[Fri May 25 17:07:15 2012] Initial guess for spatial extent in simple fitting = 7.90"
[Fri May 25 17:07:15 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.746
[Fri May 25 17:07:15 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 7.90"
[Fri May 25 23:17:32 2012] fullrun_mos2_xmm0141750501_pi300-10000_cl_pass1_src35.ximg exists
[Fri May 25 23:17:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0141750501_pi300-10000_cl_pass1_src35.csv
[Fri May 25 23:17:32 2012] fullrun_mos2_xmm0141750501_pi300-10000_cl_pass1_src35_1.ximg exists
[Fri May 25 23:17:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0141750501_pi300-10000_cl_pass1_src35.csv
[Fri May 25 23:17:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0141750501_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0141750501_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 23:17:34 2012] fullrun_mos2_xmm0141750501_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Fri May 25 23:17:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0141750501_pi300-10000_cl_pass1_tfrozen_src35.csv
[Fri May 25 23:17:34 2012] fullrun_mos2_xmm0141750501_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Fri May 25 23:17:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0141750501_pi300-10000_cl_pass1_tfrozen_src35.csv
[Fri May 25 23:17:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0141750501_pi300-10000_cl_pass1_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0141750501_pi300-10000_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 23:17:48 2012] Source 50 is offset by 6.471365 and 6.102476 pixels which is larger than
2 X fitted extent = 0.908230 x 0.908230, not incorporating fit results
[Fri May 25 23:17:48 2012] Vigneting correction estimate = 1.000000
[Fri May 25 23:17:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 23:17:48 2012] Assessing source extent using major
[Fri May 25 23:17:48 2012] Source does appear to be extended
[Fri May 25 23:17:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 23:17:55 2012] XMMSAS src. selection expression = ellipse(28568.552734, 23601.789429, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 25 23:17:55 2012] Writing source region out to fullrun_mos2_xmm0141750501_pi300-10000_pass1_cl_src50_src.reg
[Fri May 25 23:17:55 2012] Extracting stamp from image fullrun_mos2_xmm0141750501_pi300-10000_cl_sm2.00.img.gz, (291, 234) - (366, 309)
[Fri May 25 23:17:55 2012] XMMSAS bgd. selection expression = annulus(28568.552734, 23601.789429, 1087.500000, 2175.000000, X, Y) && !ellipse(29413.056488, 25434.290649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28684.282806, 25307.040405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29392.389740, 24854.371185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28830.789978, 24645.019470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28132.392487, 24737.937531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29625.652649, 23868.819000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31191.084473, 23533.119751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30208.696000, 23052.715000, 1357.352039, 1357.352039, 0.000000, X, Y) && !ellipse(32000.802000, 23226.986600, 1492.976043, 1492.976043, 0.000000, X, Y) && !ellipse(29104.056213, 23764.571930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31143.300000, 23046.152200, 1410.368041, 1410.368041, 0.000000, X, Y) && !ellipse(29507.891479, 22714.725555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28863.860200, 22605.464400, 1312.592038, 1312.592038, 0.000000, X, Y)
[Fri May 25 23:17:55 2012] Writing fullrun_mos2_xmm0141750501_pi300-10000_pass1_cl_src50.gif
[Fri May 25 23:34:01 2012] Mean detx,y = (-1072.23, -4378.17) 
[Fri May 25 23:34:01 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 25 23:34:09 2012] Binned source spectrum to 10 counts/bin
[Fri May 25 23:34:09 2012] Setting source spectrum file to fullrun_mos2_xmm0141750501_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Fri May 25 23:34:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0141750501_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Fri May 25 23:51:49 2012] Not generating rmf since there are only 76 counts
[Fri May 25 23:51:49 2012] rmf not generated due to insufficient counts
[Fri May 25 23:52:42 2012] Updating aperture counts using extracted products
[Fri May 25 23:52:42 2012] Error reading totcts from fullrun_mos2_xmm0141750501_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Fri May 25 23:52:42 2012] No arf file for this source, not re-computing flux
[Fri May 25 23:52:44 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 25 23:52:45 2012] xmm0141750501/analysis//spectral/fullrun_mos2_xmm0141750501_pi300-10000_pass1_cl_src50_pl.csv not found, spectral fit skipped or did not complete