[Fri May 25 10:11:59 2012] Detection parameters:
  Position = (411.9, 279.9) = 8 5 42.58 -41 25 26.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.8 +/- 18.2
  Background counts = 106.6
  Rate = 0.01 +/- 0.004

[Fri May 25 10:12:02 2012] Off-axis axis estimate = 8.33'
[Fri May 25 10:14:14 2012] Using EEF radius (= 10.60 ")to estimate initial spatial extent for simple fitting
[Fri May 25 10:14:14 2012] Initial guess for spatial extent in simple fitting = 10.60"
[Fri May 25 10:14:14 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.044
[Fri May 25 10:14:14 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 10.60"
[Fri May 25 17:06:45 2012] fullrun_mos2_xmm0141750501_pi300-10000_cl_pass0_src25.ximg exists
[Fri May 25 17:06:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0141750501_pi300-10000_cl_pass0_src25.csv
[Fri May 25 17:06:45 2012] fullrun_mos2_xmm0141750501_pi300-10000_cl_pass0_src25_1.ximg exists
[Fri May 25 17:06:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0141750501_pi300-10000_cl_pass0_src25.csv
[Fri May 25 17:06:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0141750501_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0141750501_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 17:06:47 2012] fullrun_mos2_xmm0141750501_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Fri May 25 17:06:48 2012] fullrun_mos2_xmm0141750501_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Fri May 25 17:06:48 2012] Fit fullrun_mos2_xmm0141750501_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Fri May 25 17:07:08 2012] Warning, spatial fit 25 centroid is now closest to src. 44
[Fri May 25 17:07:08 2012] Source 27 is offset by -0.632477 and -4.577589 pixels which is larger than
2 X fitted extent = 1.250221 x 1.250221, not incorporating fit results
[Fri May 25 17:07:08 2012] Vigneting correction estimate = 1.000000
[Fri May 25 17:07:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 17:07:08 2012] Assessing source extent using major
[Fri May 25 17:07:08 2012] Source does appear to be extended
[Fri May 25 17:07:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 17:07:15 2012] Using EEF radius (= 10.60 ")to estimate initial spatial extent for simple fitting
[Fri May 25 17:07:15 2012] Initial guess for spatial extent in simple fitting = 10.60"
[Fri May 25 17:07:15 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.044
[Fri May 25 17:07:15 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 10.60"
[Fri May 25 23:17:31 2012] fullrun_mos2_xmm0141750501_pi300-10000_cl_pass1_src17.ximg exists
[Fri May 25 23:17:31 2012] fullrun_mos2_xmm0141750501_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri May 25 23:17:31 2012] Fit fullrun_mos2_xmm0141750501_pi300-10000_cl_pass1_src17 appears to have run properly
[Fri May 25 23:17:33 2012] fullrun_mos2_xmm0141750501_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri May 25 23:17:33 2012] fullrun_mos2_xmm0141750501_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri May 25 23:17:33 2012] Fit fullrun_mos2_xmm0141750501_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Fri May 25 23:17:48 2012] Warning, spatial fit 17 centroid is now closest to src. 40
[Fri May 25 23:17:48 2012] Vigneting correction estimate = 1.000000
[Fri May 25 23:17:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 23:17:48 2012] Assessing source extent using major
[Fri May 25 23:17:48 2012] Source does appear to be extended
[Fri May 25 23:17:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 23:17:48 2012] Source is confused with source 37
[Fri May 25 23:17:55 2012] XMMSAS src. selection expression = ellipse(35785.490540, 24305.929749, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 25 23:17:55 2012] Writing source region out to fullrun_mos2_xmm0141750501_pi300-10000_pass1_cl_src27_src.reg
[Fri May 25 23:17:55 2012] Extracting stamp from image fullrun_mos2_xmm0141750501_pi300-10000_cl_sm2.00.img.gz, (374, 242) - (449, 317)
[Fri May 25 23:17:55 2012] XMMSAS bgd. selection expression = annulus(35785.490540, 24305.929749, 1087.500000, 2175.000000, X, Y) && !ellipse(36307.742767, 25490.760468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35402.051208, 25477.817200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33433.458496, 25075.622742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34099.860229, 25047.516602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37038.348419, 24481.623657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33605.873400, 24583.514000, 1308.304038, 1308.304038, 0.000000, X, Y) && !ellipse(34329.807007, 24401.938263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36425.809265, 24041.600342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33853.766000, 23824.656000, 2974.432086, 1922.960055, 190.072000, X, Y) && !ellipse(34947.611084, 23796.514587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34435.933838, 23532.769287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36957.018000, 23296.844000, 696.959220, 696.959220, 0.000000, X, Y) && !ellipse(35560.136963, 23632.879822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33862.899608, 23468.090612, 848.697235, 595.012170, 4.750000, X, Y) && !ellipse(36501.546631, 23613.641479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34950.012000, 23260.198000, 1091.608031, 1091.608031, 0.000000, X, Y) && !ellipse(34728.838000, 23178.542000, 1622.776047, 1622.776047, 0.000000, X, Y) && !ellipse(35231.218537, 22024.384005, 1627.716285, 1048.894416, 215.319358, X, Y) && !ellipse(34259.036000, 21954.297800, 1640.352047, 1640.352047, 0.000000, X, Y) && !ellipse(33037.920197, 21272.441956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33454.704000, 20990.584840, 1667.016048, 1667.016048, 0.000000, X, Y) && !ellipse(32358.796000, 21421.471600, 1595.384046, 1595.384046, 0.000000, X, Y)
[Fri May 25 23:17:55 2012] Writing fullrun_mos2_xmm0141750501_pi300-10000_pass1_cl_src27.gif
[Fri May 25 23:21:47 2012] Mean detx,y = (-8238.86, -4971.08) 
[Fri May 25 23:21:48 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 25 23:21:57 2012] Binned source spectrum to 10 counts/bin
[Fri May 25 23:21:57 2012] Setting source spectrum file to fullrun_mos2_xmm0141750501_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Fri May 25 23:21:57 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0141750501_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Fri May 25 23:51:43 2012] Not generating rmf since there are only 76 counts
[Fri May 25 23:51:43 2012] rmf not generated due to insufficient counts
[Fri May 25 23:52:42 2012] Updating aperture counts using extracted products
[Fri May 25 23:52:42 2012] Error reading totcts from fullrun_mos2_xmm0141750501_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Fri May 25 23:52:42 2012] No arf file for this source, not re-computing flux
[Fri May 25 23:52:44 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 25 23:52:45 2012] xmm0141750501/analysis//spectral/fullrun_mos2_xmm0141750501_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete