[Sun Jun 16 16:37:40 2013] Detection parameters:
  Position = (303.4, 259.2) = 17 2 33.06 78 41 0.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 340.5 +/- 37.8
  Background counts = 358.6
  Rate = 0.02 +/- 0.002

[Sun Jun 16 16:37:42 2013] Off-axis axis estimate = 2.87'
[Sun Jun 16 16:41:48 2013] Using EEF radius (= 7.86 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 16:41:48 2013] Initial guess for spatial extent in simple fitting = 7.86"
[Sun Jun 16 16:41:48 2013] source mask rpix=1.8, npix_max = 21, mask sum = 21, frac = 0.986
[Sun Jun 16 16:41:48 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 7.86"
[Sun Jun 16 20:02:41 2013] fullrun_pn_xmm0141380201_pi300-10000_cl_pass0_src6.ximg exists
[Sun Jun 16 20:02:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0141380201_pi300-10000_cl_pass0_src6.csv
[Sun Jun 16 20:02:41 2013] fullrun_pn_xmm0141380201_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun Jun 16 20:02:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0141380201_pi300-10000_cl_pass0_src6.csv
[Sun Jun 16 20:02:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0141380201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0141380201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 20:02:43 2013] fullrun_pn_xmm0141380201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun Jun 16 20:02:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0141380201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sun Jun 16 20:02:43 2013] fullrun_pn_xmm0141380201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Jun 16 20:02:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0141380201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sun Jun 16 20:02:43 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0141380201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0141380201_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:38:46 2013] Source 7 is offset by -5.027247 and -6.825019 pixels which is larger than
2 X fitted extent = 2.511398 x 0.903582, not incorporating fit results
[Mon Jun 17 00:38:47 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 00:38:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 00:38:47 2013] Assessing source extent using major
[Mon Jun 17 00:38:47 2013] Source does appear to be extended
[Mon Jun 17 00:38:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 00:38:48 2013] Source is confused with source 26
[Mon Jun 17 00:39:29 2013] Using EEF radius (= 7.86 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:39:29 2013] Initial guess for spatial extent in simple fitting = 7.86"
[Mon Jun 17 00:39:29 2013] source mask rpix=1.8, npix_max = 21, mask sum = 21, frac = 0.986
[Mon Jun 17 00:39:29 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 7.86"
[Mon Jun 17 04:26:54 2013] fullrun_pn_xmm0141380201_pi300-10000_cl_pass1_src6.ximg exists
[Mon Jun 17 04:26:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0141380201_pi300-10000_cl_pass1_src6.csv
[Mon Jun 17 04:26:54 2013] fullrun_pn_xmm0141380201_pi300-10000_cl_pass1_src6_1.ximg exists
[Mon Jun 17 04:26:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0141380201_pi300-10000_cl_pass1_src6.csv
[Mon Jun 17 04:26:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0141380201_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0141380201_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 04:26:56 2013] fullrun_pn_xmm0141380201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Mon Jun 17 04:26:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0141380201_pi300-10000_cl_pass1_tfrozen_src6.csv
[Mon Jun 17 04:26:56 2013] fullrun_pn_xmm0141380201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Mon Jun 17 04:26:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0141380201_pi300-10000_cl_pass1_tfrozen_src6.csv
[Mon Jun 17 04:26:56 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0141380201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0141380201_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 09:12:35 2013] Source 7 is offset by 0.792737 and 4.999027 pixels which is larger than
2 X fitted extent = 1.940800 x 0.903582, not incorporating fit results
[Mon Jun 17 09:12:35 2013] Spatial fit model total counts = 6858.100000, observed total counts = 6845.000000
[Mon Jun 17 09:12:35 2013] Offset between fit and detection position for source 7 = 3.775599 pixels
[Mon Jun 17 09:12:35 2013] Warning, changing simple spatial fit ID from 6 to 23
[Mon Jun 17 09:12:35 2013] 6538.771000 total counts/ 5548.740000 bgd. counts: snr = 13.290815
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 3.775599 pixels
  Position = (301.8, 255.8) = 17 2 35.41 78 40 31.3
  Extent = 32.2 (32.2-64.4)", rotation angle = 0
  Source counts = 990.0 +/- 80.9
  Background counts = 5548.7
  Rate = 0.07 +/- 0.006
[Mon Jun 17 09:12:35 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 09:12:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 09:12:35 2013] Assessing source extent using major axis lower bound
[Mon Jun 17 09:12:35 2013] Source does appear to be extended
[Mon Jun 17 09:12:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 09:13:18 2013] XMMSAS src. selection expression = ellipse(26207.406000, 22206.136000, 1932.012056, 1932.012056, 0.000000, X, Y)
[Mon Jun 17 09:13:18 2013] Writing source region out to fullrun_pn_xmm0141380201_pi300-10000_pass1_cl_src7_src.reg
[Mon Jun 17 09:13:18 2013] Extracting stamp from image fullrun_pn_xmm0141380201_pi300-10000_cl_sm2.00.img.gz, (191, 145) - (413, 367)
[Mon Jun 17 09:13:19 2013] XMMSAS bgd. selection expression = annulus(26207.406000, 22206.136000, 3220.020093, 6440.040185, X, Y) && !ellipse(21309.597763, 21756.427246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24295.333527, 19939.619904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24738.975647, 19885.513062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20341.567444, 19207.949585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23778.032928, 21091.576050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24909.765717, 20745.996109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24303.176483, 20565.167374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23945.798920, 20146.787857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20151.180603, 20065.395279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25191.586456, 19644.788193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25987.556274, 19371.013519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19591.767258, 19521.008072, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20923.972015, 25250.944946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25516.138000, 21794.628600, 1325.768038, 1325.768038, 0.000000, X, Y) && !ellipse(25090.809509, 21534.525208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25847.488000, 21757.756000, 1288.008037, 1288.008037, 0.000000, X, Y) && !ellipse(21816.922089, 21424.909668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25370.259308, 21008.166977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22066.670074, 20925.103058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26017.303223, 20479.606400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20788.006638, 19461.634979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31489.864000, 23548.622200, 407.176812, 407.176812, 0.000000, X, Y) && !ellipse(24009.325806, 22995.303741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23765.490570, 22566.415619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22347.646515, 22467.659149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23253.911560, 22216.566391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22826.635040, 21954.917236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22129.484085, 21967.823334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26347.387085, 21444.116150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20752.587219, 21298.163879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19016.705170, 20505.246017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26954.701141, 20302.865082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26283.653107, 19788.661575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27155.121338, 19301.398651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26476.434784, 19256.652115, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 17 09:13:19 2013] Writing fullrun_pn_xmm0141380201_pi300-10000_pass1_cl_src7.gif
[Mon Jun 17 09:19:56 2013] Mean detx,y = (-4706.13, 2908.94) 
[Mon Jun 17 09:19:59 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 17 09:21:26 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 17 09:21:26 2013] Setting source spectrum file to fullrun_pn_xmm0141380201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon Jun 17 09:21:26 2013] Setting bgd. spectrum file to fullrun_pn_xmm0141380201_pi300-10000_pass1_cl_src7_bgd.pi.gz