[Sun Jun 16 16:38:05 2013] Detection parameters:
  Position = (291.0, 229.1) = 17 2 51.31 78 38 35.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 148.6 +/- 21.2
  Background counts = 121.0
  Rate = 0.01 +/- 0.002

[Sun Jun 16 16:38:06 2013] Off-axis axis estimate = 5.06'
[Sun Jun 16 20:02:44 2013] Using EEF radius (= 8.96 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 20:02:44 2013] Initial guess for spatial extent in simple fitting = 8.96"
[Sun Jun 16 20:02:44 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.145
[Sun Jun 16 20:02:44 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 8.96"
[Sun Jun 16 21:56:01 2013] fullrun_mos1_xmm0141380201_pi300-10000_cl_pass0_src4.ximg exists
[Sun Jun 16 21:56:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0141380201_pi300-10000_cl_pass0_src4.csv
[Sun Jun 16 21:56:01 2013] fullrun_mos1_xmm0141380201_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun Jun 16 21:56:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0141380201_pi300-10000_cl_pass0_src4.csv
[Sun Jun 16 21:56:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0141380201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0141380201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 21:56:01 2013] fullrun_mos1_xmm0141380201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun Jun 16 21:56:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0141380201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun Jun 16 21:56:01 2013] fullrun_mos1_xmm0141380201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Jun 16 21:56:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0141380201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun Jun 16 21:56:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0141380201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0141380201_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:38:55 2013] Spatial fit model total counts = 1420.640000, observed total counts = 1171.000000
[Mon Jun 17 00:38:55 2013] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 17 00:38:55 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 00:38:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 00:38:55 2013] Assessing source extent using major
[Mon Jun 17 00:38:55 2013] Source does appear to be extended
[Mon Jun 17 00:38:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 00:38:55 2013] Source is confused with source 30
[Mon Jun 17 00:38:55 2013] Source is confused with source 32
[Mon Jun 17 04:26:57 2013] Using EEF radius (= 8.96 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 04:26:57 2013] Initial guess for spatial extent in simple fitting = 8.96"
[Mon Jun 17 04:26:57 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.145
[Mon Jun 17 04:26:57 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 8.96"
[Mon Jun 17 06:27:12 2013] fullrun_mos1_xmm0141380201_pi300-10000_cl_pass1_src3.ximg exists
[Mon Jun 17 06:27:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0141380201_pi300-10000_cl_pass1_src3.csv
[Mon Jun 17 06:27:12 2013] fullrun_mos1_xmm0141380201_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Jun 17 06:27:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0141380201_pi300-10000_cl_pass1_src3.csv
[Mon Jun 17 06:27:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0141380201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0141380201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 06:27:13 2013] fullrun_mos1_xmm0141380201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Jun 17 06:27:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0141380201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Mon Jun 17 06:27:13 2013] fullrun_mos1_xmm0141380201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Jun 17 06:27:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0141380201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Mon Jun 17 06:27:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0141380201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0141380201_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 09:12:44 2013] Spatial fit model total counts = 1420.350000, observed total counts = 1171.000000
[Mon Jun 17 09:12:44 2013] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 17 09:12:44 2013] Spatial fit model total counts = 1500.940000, observed total counts = 1403.000000
[Mon Jun 17 09:12:44 2013] Offset between fit and detection position for source 7 = 0.106374 pixels
[Mon Jun 17 09:12:44 2013] Warning, changing simple spatial fit ID from 3 to 11
[Mon Jun 17 09:12:44 2013] 1457.264400 total counts/ 1377.200000 bgd. counts: snr = 2.157451
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.106374 pixels
  Position = (291.1, 229.1) = 17 2 51.17 78 38 35.2
  Extent = 18.1 (3.6-36.2)" x 3.1 (2.3-8.0)", rotation angle = 84 (57-97) degrees
  Source counts = 80.1 +/- 38.2
  Background counts = 1377.2
  Rate = 0.005 +/- 0.003
[Mon Jun 17 09:12:44 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 09:12:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 09:12:44 2013] Assessing source extent using major axis lower bound
[Mon Jun 17 09:12:44 2013] Source does appear to be extended
[Mon Jun 17 09:12:44 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.45
[Mon Jun 17 10:07:35 2013] XMMSAS src. selection expression = ellipse(25277.770000, 19883.151000, 1087.182031, 183.169805, 83.551850, X, Y)
[Mon Jun 17 10:07:35 2013] Writing source region out to fullrun_mos1_xmm0141380201_pi300-10000_pass1_cl_src7_src.reg
[Mon Jun 17 10:07:35 2013] Extracting stamp from image fullrun_mos1_xmm0141380201_pi300-10000_cl_sm2.00.img.gz, (229, 167) - (354, 292)
[Mon Jun 17 10:07:35 2013] XMMSAS bgd. selection expression = annulus(25277.770000, 19883.151000, 1811.970052, 3623.940104, X, Y) && !ellipse(24178.108673, 20384.852386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24988.821869, 21279.964981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23006.348000, 20770.772000, 1428.512041, 1428.512041, 0.000000, X, Y) && !ellipse(24593.434906, 21621.441574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24779.358643, 20046.438370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23505.064056, 20306.171921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23199.298000, 22479.900000, 1659.552048, 1659.552048, 0.000000, X, Y) && !ellipse(24813.746582, 19697.300690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24454.312000, 21938.744400, 1307.928038, 1307.928038, 0.000000, X, Y) && !ellipse(26302.222382, 20500.664764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25733.154022, 20673.837723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25045.722000, 22141.074200, 2615.856075, 2615.856075, 0.000000, X, Y) && !ellipse(25809.224000, 19229.104000, 2962.640085, 1261.904036, 31.714900, X, Y) && !ellipse(23552.504120, 22057.645630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26312.134000, 18556.926000, 1481.320043, 1481.320043, 0.000000, X, Y) && !ellipse(25758.806915, 22049.441589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24352.530823, 22593.982788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22233.060760, 21958.334259, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 17 10:07:35 2013] Writing fullrun_mos1_xmm0141380201_pi300-10000_pass1_cl_src7.gif
[Mon Jun 17 10:08:06 2013] Mean detx,y = (-3021.16, -7217.82) 
[Mon Jun 17 10:08:08 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 17 10:08:22 2013] Binned source spectrum to 10 counts/bin