[Sun Jun 16 16:38:05 2013] Detection parameters:
  Position = (292.0, 239.6) = 17 2 49.89 78 39 17.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 135.7 +/- 18.2
  Background counts = 121.4
  Rate = 0.01 +/- 0.001

[Sun Jun 16 16:38:06 2013] Off-axis axis estimate = 4.29'
[Sun Jun 16 20:02:44 2013] Using EEF radius (= 8.58 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 20:02:44 2013] Initial guess for spatial extent in simple fitting = 8.58"
[Sun Jun 16 20:02:44 2013] source mask rpix=2.0, npix_max = 24, mask sum = 16, frac = 0.655
[Sun Jun 16 20:02:44 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 8.58"
[Sun Jun 16 21:56:01 2013] fullrun_mos1_xmm0141380201_pi300-10000_cl_pass0_src6.ximg exists
[Sun Jun 16 21:56:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0141380201_pi300-10000_cl_pass0_src6.csv
[Sun Jun 16 21:56:01 2013] fullrun_mos1_xmm0141380201_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun Jun 16 21:56:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0141380201_pi300-10000_cl_pass0_src6.csv
[Sun Jun 16 21:56:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0141380201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0141380201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 21:56:01 2013] fullrun_mos1_xmm0141380201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun Jun 16 21:56:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0141380201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sun Jun 16 21:56:01 2013] fullrun_mos1_xmm0141380201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Jun 16 21:56:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0141380201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sun Jun 16 21:56:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0141380201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0141380201_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:38:55 2013] Spatial fit model total counts = 1625.650000, observed total counts = 1479.000000
[Mon Jun 17 00:38:55 2013] Offset between fit and detection position for source 6 = 0.886655 pixels
[Mon Jun 17 00:38:55 2013] Warning, changing simple spatial fit ID from 6 to 5
[Mon Jun 17 00:38:55 2013] 1621.082300 total counts/ 1601.370000 bgd. counts: snr = 0.492597
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.886655 pixels
  Position = (292.5, 238.8) = 17 2 49.18 78 39 17.5
  Extent = 2.7 (2.1-5.6)", rotation angle = 0
  Source counts = 19.7 +/- 40.3
  Background counts = 1601.4
  Rate = 0.001 +/- 0.003
  Deleting source due to low Poisson probability