[Wed Jun 12 13:49:08 2013] Detection parameters:
  Position = (245.3, 193.3) = 10 7 44.68 12 39 43.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.4 +/- 9.6
  Background counts = 14.9
  Rate = 0.002 +/- 0.0005

[Wed Jun 12 13:49:08 2013] Off-axis axis estimate = 8.54'
[Wed Jun 12 13:49:33 2013] Using EEF radius (= 10.70 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 13:49:33 2013] Initial guess for spatial extent in simple fitting = 10.70"
[Wed Jun 12 13:49:33 2013] source mask rpix=2.5, npix_max = 35, mask sum = 20, frac = 0.571
[Wed Jun 12 13:49:33 2013] Giving source the simple spatial ID 59 for pass 0, mean size = 10.70"
[Wed Jun 12 13:49:35 2013] fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_src59.ximg exists
[Wed Jun 12 13:49:35 2013] fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_src59_1.ximg exists
[Wed Jun 12 13:49:35 2013] Fit fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_src59 appears to have run properly
[Wed Jun 12 13:49:36 2013] fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Wed Jun 12 13:49:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src59.csv
[Wed Jun 12 13:49:36 2013] fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Wed Jun 12 13:49:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src59.csv
[Wed Jun 12 13:49:36 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 13:49:50 2013] Warning: source 59 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 59 at 14.660410 pixels away
[Wed Jun 12 13:49:50 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 13:49:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 13:49:50 2013] Assessing source extent using major
[Wed Jun 12 13:49:50 2013] Source does appear to be extended
[Wed Jun 12 13:49:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 13:50:12 2013] Using EEF radius (= 10.70 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 13:50:12 2013] Initial guess for spatial extent in simple fitting = 10.70"
[Wed Jun 12 13:50:12 2013] source mask rpix=2.5, npix_max = 35, mask sum = 20, frac = 0.571
[Wed Jun 12 13:50:12 2013] Giving source the simple spatial ID 59 for pass 1, mean size = 10.70"
[Wed Jun 12 13:50:13 2013] fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_src59.ximg exists
[Wed Jun 12 13:50:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_src59.csv
[Wed Jun 12 13:50:13 2013] fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_src59_1.ximg exists
[Wed Jun 12 13:50:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_src59.csv
[Wed Jun 12 13:50:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 13:50:14 2013] fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Wed Jun 12 13:50:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src59.csv
[Wed Jun 12 13:50:14 2013] fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Wed Jun 12 13:50:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src59.csv
[Wed Jun 12 13:50:14 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 13:50:27 2013] Warning: source 59 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 59 at 10.514755 pixels away
[Wed Jun 12 13:50:27 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 13:50:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 13:50:27 2013] Assessing source extent using major
[Wed Jun 12 13:50:27 2013] Source does appear to be extended
[Wed Jun 12 13:50:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 13:50:49 2013] XMMSAS src. selection expression = ellipse(21288.974823, 16770.468079, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 12 13:50:49 2013] Not overwriting source region fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src59_src.reg
[Wed Jun 12 13:50:49 2013] Extracting stamp from image fullrun_pn_xmm0140550601_pi300-10000_cl_sm2.00.img.gz, (208, 156) - (283, 231)
[Wed Jun 12 13:50:49 2013] XMMSAS bgd. selection expression = annulus(21288.974823, 16770.468079, 1087.500000, 2175.000000, X, Y) && !ellipse(24070.054291, 18662.354340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22561.007600, 16937.840600, 557.385616, 557.385616, 0.000000, X, Y)
[Wed Jun 12 13:50:49 2013] Writing fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src59.gif
[Wed Jun 12 14:02:22 2013] Mean detx,y = (-7242.01, 9614.39) 
[Wed Jun 12 14:02:24 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 12 14:02:51 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 12 14:02:51 2013] Setting source spectrum file to fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Wed Jun 12 14:02:51 2013] Setting bgd. spectrum file to fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src59_bgd.pi.gz
[Wed Jun 12 14:17:42 2013] Not generating rmf since there are only 43 counts
[Wed Jun 12 14:17:42 2013] rmf not generated due to insufficient counts
[Wed Jun 12 15:06:22 2013] Updating aperture counts using extracted products
[Wed Jun 12 15:06:22 2013] Total counts from fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src59_src_b10.pi.gz = 145.00
[Wed Jun 12 15:06:22 2013] Total counts from fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src59_bgd.pi.gz = 717.00
[Wed Jun 12 15:06:22 2013] Got source and background scale factors 1072977.000000, 9807989.000000
[Wed Jun 12 15:06:22 2013] User source parameters:
  Position = (245.3, 193.3) = 10 7 44.68 12 39 43.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 66.6 +/- 13.1
  Background aperture counts = 78.4
  Rate = 0.003 +/- 0.0007

[Wed Jun 12 15:06:22 2013] Updating counts from extracted products
[Wed Jun 12 15:06:22 2013] Set source signif. to 66.56/8.86 = 7.52
[Wed Jun 12 15:06:23 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 15:06:23 2013] Using photon index=1.80, rate=0.00331, arf fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src59.arf
[Wed Jun 12 15:06:23 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 15:06:23 2013] Updating source flux to 2.2e-14
[Wed Jun 12 15:06:36 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 12 15:06:37 2013] xmm0140550601/analysis//spectral/fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src59_pl.csv not found, spectral fit skipped or did not complete