[Wed Jun 12 13:49:06 2013] Detection parameters:
  Position = (144.6, 347.9) = 10 8 14.64 12 50 54.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 299.9 +/- 21.4
  Background counts = 13.0
  Rate = 0.01 +/- 0.001

[Wed Jun 12 13:49:08 2013] Off-axis axis estimate = 11.72'
[Wed Jun 12 13:49:33 2013] Using EEF radius (= 12.29 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 13:49:33 2013] Initial guess for spatial extent in simple fitting = 12.29"
[Wed Jun 12 13:49:33 2013] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.950
[Wed Jun 12 13:49:33 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 12.29"
[Wed Jun 12 13:49:34 2013] fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_src5.ximg exists
[Wed Jun 12 13:49:34 2013] fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Jun 12 13:49:34 2013] Fit fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_src5 appears to have run properly
[Wed Jun 12 13:49:35 2013] fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Jun 12 13:49:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed Jun 12 13:49:35 2013] fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Jun 12 13:49:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed Jun 12 13:49:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 13:49:50 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 16.180154 pixels away
[Wed Jun 12 13:49:50 2013] Source 5 is offset by 9.476127 and 2.019142 pixels which is larger than
2 X fitted extent = 1.172418 x 1.172418, not incorporating fit results
[Wed Jun 12 13:49:50 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 13:49:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 13:49:50 2013] Assessing source extent using major
[Wed Jun 12 13:49:50 2013] Source does appear to be extended
[Wed Jun 12 13:49:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 13:50:12 2013] Using EEF radius (= 12.29 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 13:50:12 2013] Initial guess for spatial extent in simple fitting = 12.29"
[Wed Jun 12 13:50:12 2013] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.950
[Wed Jun 12 13:50:12 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 12.29"
[Wed Jun 12 13:50:13 2013] fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_src5.ximg exists
[Wed Jun 12 13:50:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_src5.csv
[Wed Jun 12 13:50:13 2013] fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Jun 12 13:50:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_src5.csv
[Wed Jun 12 13:50:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 13:50:13 2013] fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Jun 12 13:50:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src5.csv
[Wed Jun 12 13:50:13 2013] fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Jun 12 13:50:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src5.csv
[Wed Jun 12 13:50:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 13:50:26 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 16.852018 pixels away
[Wed Jun 12 13:50:27 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 13:50:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 13:50:27 2013] Assessing source extent using major
[Wed Jun 12 13:50:27 2013] Source does appear to be extended
[Wed Jun 12 13:50:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 13:50:48 2013] XMMSAS src. selection expression = ellipse(12531.423080, 30218.669373, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 12 13:50:48 2013] Not overwriting source region fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src5_src.reg
[Wed Jun 12 13:50:48 2013] Extracting stamp from image fullrun_pn_xmm0140550601_pi300-10000_cl_sm2.00.img.gz, (107, 310) - (182, 385)
[Wed Jun 12 13:50:48 2013] XMMSAS bgd. selection expression = annulus(12531.423080, 30218.669373, 1087.500000, 2175.000000, X, Y) && !ellipse(12541.226776, 28212.733673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12146.838104, 28594.593262, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 12 13:50:48 2013] Writing fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src5.gif
[Wed Jun 12 13:50:50 2013] ../../xmm0140550601/products/events/fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src5_src.evt and ../../xmm0140550601/products/events/fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src5_bgd.evt exist, delete to re-create
[Wed Jun 12 13:50:50 2013] Mean detx,y = (-13411.65, -5255.36) 
[Wed Jun 12 13:50:50 2013] ../../xmm0140550601/products/images/fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src5_src.img and ../../xmm0140550601/products/images/fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src5_bgd.img exist, delete to re-create
[Wed Jun 12 13:50:50 2013] ../../xmm0140550601/products/spectra/fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src5_src.pi and ../../xmm0140550601/products/spectra/fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src5_bgd.pi exist, delete to re-create
[Wed Jun 12 13:50:50 2013] Setting source spectrum file to fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src5_src.pi.gz
[Wed Jun 12 13:50:50 2013] Setting bgd. spectrum file to fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed Jun 12 13:50:50 2013] ../../xmm0140550601/products/lightcurves/fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src5_src.lc and ../../xmm0140550601/products/lightcurves/fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src5_bgd.lc exist, delete to re-create
[Wed Jun 12 14:03:58 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 12 14:03:58 2013] rmf not generated due to insufficient counts
[Wed Jun 12 15:06:13 2013] Updating aperture counts using extracted products
[Wed Jun 12 15:06:13 2013] Total counts from fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src5_src.pi.gz = 340.00
[Wed Jun 12 15:06:14 2013] Total counts from fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src5_bgd.pi.gz = 602.00
[Wed Jun 12 15:06:14 2013] Got source and background scale factors 1166492.000000, 8782031.000000
[Wed Jun 12 15:06:14 2013] User source parameters:
  Position = (144.6, 347.9) = 10 8 14.64 12 50 54.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 260.0 +/- 19.5
  Background aperture counts = 80.0
  Rate = 0.01 +/- 0.001

[Wed Jun 12 15:06:14 2013] Updating counts from extracted products
[Wed Jun 12 15:06:14 2013] Set source signif. to 260.04/8.94 = 29.08
[Wed Jun 12 15:06:23 2013] No arf file for this source, not re-computing flux
[Wed Jun 12 15:06:36 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 12 15:06:37 2013] xmm0140550601/analysis//spectral/fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete